The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
VTR 8: High-performance CAD and Customizable FPGA Architecture Modelling
Abstract
Developing Field-programmable Gate Array (FPGA) architectures is challenging due to the competing requirements of various application domains and changing manufacturing process technology. This is compounded by the difficulty of fairly evaluating FPGA architectural choices, which requires sophisticated high-quality Computer Aided Design (CAD) tools to target each potential architecture. This article describes version 8.0 of the open source Verilog to Routing (VTR) project, which provides such a design flow. VTR 8 expands the scope of FPGA architectures that can be modelled, allowing VTR to target and model many details of both commercial and proposed FPGA architectures. The VTR design flow also serves as a baseline for evaluating new CAD algorithms. It is therefore important, for both CAD algorithm comparisons and the validity of architectural conclusions, that VTR produce high-quality circuit implementations. VTR 8 significantly improves optimization quality (reductions of 15% minimum routable channel width, 41% wirelength, and 12% critical path delay), run-time (5.3× faster) and memory footprint (3.3× lower). Finally, we demonstrate VTR is run-time and memory footprint efficient, while producing circuit implementations of reasonable quality compared to highly-tuned architecture-specific industrial tools—showing that architecture generality, good implementation quality, and run-time efficiency are not mutually exclusive goals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1994) · Cited by 21,711
A Formal Basis for the Heuristic Determination of Minimum Cost Paths
Hart, P., Nilsson, N., & Raphael, B. (1968) · IEEE Transactions on Systems Science and Cybernetics · doi:10.1109/tssc.1968.300136 · Cited by 12,738
Architecture and CAD for Deep-Submicron FPGAS
Betz, V., Rose, J., & Marquardt, A. (1999) · Springer eBooks · doi:10.1007/978-1-4615-5145-4 · Cited by 1,352
Self-citationVPR: a new packing, placement and routing tool for FPGA research
Betz, V., & Rose, J. (1997) · Lecture Notes in Computer Science · doi:10.1007/3-540-63465-7_226 · Cited by 1,123
Self-citationABC: An Academic Industrial-Strength Verification Tool
Brayton, R., & Mishchenko, A. (2010) · Lecture Notes in Computer Science · doi:10.1007/978-3-642-14295-6_5 · Cited by 944
A reconfigurable fabric for accelerating large-scale datacenter services
Putnam, A., Caulfield, A. M., Chung, E. S., Chiou, D., Constantinides, K., Demme, J., Esmaeilzadeh, H., Fowers, J., Gopal, G. P., Gray, J., et al. (2014) · ACM SIGARCH Computer Architecture News · doi:10.1145/2678373.2665678 · Cited by 693
PathFinder: a negotiation-based performance-driven router for FPGAs
McMurchie, L., & Ebeling, C. (1995) · Proceedings of the 1995 ACM third international symposium on Field-programmable gate arrays · doi:10.1145/201310.201328 · Cited by 683
VTR 7.0: Next Generation Architecture and CAD System for FPGAs
Luu, J., Goeders, J., Wainberg, M., Somerville, A., Yu, T., Nasartschuk, K., Nasr, M., Wang, S., Liu, T., Ahmed, N., et al. (2014) · ACM Transactions on Reconfigurable Technology and Systems · doi:10.1145/2617593 · Cited by 362
Self-citationServing DNNs in Real Time at Datacenter Scale with Project Brainwave
Chung, E., Fowers, J., Ovtcharov, K., Papamichael, M., Caulfield, A., Massengill, T., Liu, M., Lo, D., Alkalay, S., Haselman, M., et al. (2018) · IEEE Micro · doi:10.1109/mm.2018.022071131 · Cited by 328
The VTR project: architecture and CAD for FPGAs from verilog to routing
Rose, J., Luu, J., Yu, C. W., Densmore, O., Goeders, J., Somerville, A., Kent, K. B., Jamieson, P., & Anderson, J. (2012) · Proceedings of the ACM/SIGDA international symposium on Field Programmable Gate Arrays · doi:10.1145/2145694.2145708 · Cited by 265
Self-citation
Cited by
Modern computing: Vision and challenges
Gill, S. S., Wu, H., Patros, P., Ottaviani, C., Arora, P., Pujol, V. C., Haunschild, D., Parlikad, A. K., Cetinkaya, O., Lutfiyya, H., et al. (2024) · Telematics and Informatics Reports · doi:10.1016/j.teler.2024.100116 · Cited by 197
Self-citation
Metadata
- Authors
- Murray, K. E., Petelin, O., Zhong, S., Wang, J. M., Eldafrawy, M., Legault, J.-P., Sha, E., Graham, A. G., Wu, J., Walker, M. J. P., Zeng, H., Patros, P., Luu, J., Kent, K. B., & Betz, V.
- Venue
- ACM Transactions on Reconfigurable Technology and Systems
- Published
- 2020-06
- Volume
- 13
- Issue
- 2
- Pages
- 1-55
- ISSN
- 1936-7406 (ISSN-L)
- 1936-7414
- OpenAlex
- W3033033241
- Cited by
- 300
- References
- 19
- FWCI
- 13.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: VTR 8: High-performance CAD and Customizable FPGA Architecture Modelling. https://app.cochat.ai/papers/10.1145/3388617
- The paper
- Murray, K. E., Petelin, O., Zhong, S., Wang, J. M., Eldafrawy, M., Legault, J.-P., Sha, E., Graham, A. G., Wu, J., Walker, M. J. P., Zeng, H., Patros, P., Luu, J., Kent, K. B., & Betz, V. (2020). VTR 8: High-performance CAD and Customizable FPGA Architecture Modelling. ACM Transactions on Reconfigurable Technology and Systems. https://doi.org/10.1145/3388617
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.