A Systematic Review of Data Quality in CPS and IoT for Industry 4.0
Open accessThe DOI matches its Crossref record; 143 of the 143 references it cites were found in a registry or an index; 48 of the 184 sources its claims cite were checked for support.
Abstract
The Internet of Things (IoT) and Cyber-Physical Systems (CPS) are the backbones of Industry 4.0, where data quality is crucial for decision support. Data quality in these systems can deteriorate due to sensor failures or uncertain operating environments. Our objective is to summarize and assess the research efforts that address data quality in data-centric CPS/IoT industrial applications. We systematically review the state-of-the-art data quality techniques for CPS and IoT in Industry 4.0 through a systematic literature review (SLR) study. We pose three research questions, define selection and exclusion criteria for primary studies, and extract and synthesize data from these studies to answer our research questions. Our most significant results are (i) the list of data quality issues, their sources, and application domains, (ii) the best practices and metrics for managing data quality, (iii) the software engineering solutions employed to manage data quality, and (iv) the state of the data quality techniques (data repair, cleaning, and monitoring) in the application domains. The results of our SLR can help researchers obtain an overview of existing data quality issues, techniques, metrics, and best practices. We suggest research directions that require attention from the research community for follow-up work.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
31 Valid · 16 Not valid · 34 Not checked · 134 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“For instance, Zhang et al. [156] and Liu et al. [110] study the literature on data quality based on quality issues, dimensions, and measures but exclude the data quality techniques (e.g., data repair) and their solution domain (i.e., the abstract environment where the data quality technique is developed).”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 1 INTRODUCTION
What the sources say
- Disputedcites [156] matched to “Data Quality Management in the Internet of Things” (2021) sourceExperimental — accuracy not yet measured
The paper does review data-quality issues, dimensions, and metrics (Section 4). But its Abstract says it surveys data-quality frameworks and methodologies to help choose management techniques, and Section 3 reviews those techniques and screens frameworks by their applicability to the IoT domain. That contradicts the claim that Zhang et al. exclude techniques and their solution domain; this verdict does not assess Liu et al. (LLM, conf=0.88)
Checked by a reasoning model — may be wrong.
- Not checked — no full text of the sourcecites [110] matched to “Data quality and the Internet of Things” (2020) source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“Two techniques [9,18] employ the principal component analysis [53] to filter out irrelevant attributes.”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > Noise Sample Reduction
What the sources say
- Disputedcites [9] matched to “How to Address the Data Quality Issues in Regression Models: A Guided Process for Data Cleaning” (2018) sourceExperimental — accuracy not yet measured
Our copy shows this paper does not employ PCA to filter out irrelevant attributes: Section 4.2.4 states 'we recommend using two methods of filter approach based on the absolute correlation... Chi-squared and Information Gain were the methods used', and the concluding bullet says 'the filter methods were used in DC-RM (due their fast and low computational cost)'. PCA appears only twice: as an example of the 'Projection' approach in a taxonomy of four dimensionality-reduction approaches (Section 3.3, citing Blum & Langley), and in Section 4.2.2 where the first two principal components were plotted merely to verify LOF-detected outliers. Thus the attribution that this technique uses PCA to remove irrelevant attributes is contrary to what the paper reports. (LLM, conf=0.75)
Checked by a reasoning model — may be wrong.
- Not checked — no full text of the sourcecites [18] matched to “Data construction method for the applications of workshop digital twin system” (2021) source
- Not checked — no full text of the sourcecites [53] matched to “Principal component analysis” (2010) source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“Four of these papers [7,11,19,31] investigate how data security solutions can improve data quality (in particular, data accuracy).”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 4.1.3 RQ1.3: What is the Tradeoff between Data Quality and Data Security?
What the sources say
- Not matchedcites [7]
The reference list we hold has no entry [7].
- Supportedcites [11] matched to “A trust architecture for blockchain in IoT” (2019) source
The Security Analysis section explains that the proposed data-trust module assigns low trust to tampered sensor observations when other observations do not support them. Section 5.1 evaluates its ability to distinguish honest observations from malicious ones that deviate from the true target path. This supports citing the paper as an investigation of how a security-oriented trust mechanism can protect data accuracy; the count of four refers to the citing document’s group of papers, not to this source alone. (LLM, conf=0.88)
- Not matchedcites [19]
The reference list we hold has no entry [19].
- Not checked — no full text of the sourcecites [31] source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“However, we revealed only two studies [12,27] applying ML to data repair.”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > Sensory Substitution -Fog based Analytics
What the sources say
- Not matchedcites [12]
The reference list we hold has no entry [12].
- Supportedcites [27] matched to “Improving data quality of low-cost IoT sensors in environmental monitoring networks using data fusion and machine learning approach” (2020) source
The Introduction says the study applies models to correct sensor-output errors, and §5.6 describes using an artificial neural network to calibrate sensor data. This supports citing the paper as one study applying machine learning to data repair; the count of two is the citing authors’ own finding. (LLM, conf=0.91)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“They provide only offline repair.”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 4.2.2 RQ2.2: What Are the Data Repair Techniques?
What the sources say
- Could not verifycites [44] matched to “A Dependable Time Series Analytic Framework for Cyber-Physical Systems of IoT-based Smart Grid” (2019) sourceExperimental — accuracy not yet measured
Our copy of 10.1145/3145623 contains only the institutional-repository metadata record (title/author listing, Abstract-section blocks holding BIBTEX/RIS citation exports, Scopus links and PlumX metrics such as '352 Downloads (Pure)' and 'Citation Indexes: 43'); no body text of the article is present. Searches for 'offline repair', 'data repair / missing value recovery', 'online real-time imputation versus offline batch', and 'framework architecture anomaly detection smart grid' returned nothing but these bibliographic passages, so nothing addresses whether the authors' framework provides only offline repair. Absence here is not contrary evidence, hence unverifiable rather than disputed. (LLM, conf=0.75)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
126 more claims · 25 with their cited sources checked
Create a free account to see all 215 claims and to verify the 2 references still open.
- It may state two separate claims as one. 43
- Probably not a substantial claim. 53
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Noise , which is another topmost issue affecting sensor data [6,7].”
From Case-Based Data Quality Management for IoT Logs: A Case Study Focusing on Detection of Data Quality Issues (2025) · cites this paper as [7]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Missing Data , which are widely regarded as the most prevalent issue in sensor data-excluding outliers, which are frequent but represent intrinsically valid observations [6,7].”
From Case-Based Data Quality Management for IoT Logs: A Case Study Focusing on Detection of Data Quality Issues (2025) · cites this paper as [7]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“which is known to suffer from many Data Quality Issues (DQIs), such as missing data due to faulty sensors or noise due to difficult environmental conditions [5-7].”
From Case-Based Data Quality Management for IoT Logs: A Case Study Focusing on Detection of Data Quality Issues (2025) · cites this paper as [7]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 4.3.2 RQ3.2: What Data Storage Solutions Are Used to Manage Data Quality?
“Three papers [1,7,11] employ the blockchain to ensure data security, such as the trustworthiness of sensor observations, while the blockchain is also a storage medium.”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 4.3.2 RQ3.2: What Data Storage Solutions Are Used to Manage Data Quality?
“There is an explicit dependency between the data storage solution and the data quality support (i.e., ensuring data security) in these two works.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 1 INTRODUCTION
“Number of primary studies 14 NA 57 45 NA 60 57”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 2.4 Data Synthesis and Extraction Method
“We included 51 primary studies in our study.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > IoT Architecture Perception Network Application L1
“Nine primary studies [4,8,10,16,23,24,31,40,49] cover edge-Cloud orchestration for data processing (not necessarily data quality management).”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > IoT Architecture Perception Network Application L1
“Villalobos et al. [42] Wang et al. [44] Hui et al. [14] Mohammed et al. [26] Ahmed et al. [1] Tham et al. [41] Kufner et al. [21] Casado-vara et al. [7] Dedeoglu et al. [11] Guo et al. [13] Buschjager et al. [5] Yu et al. [49] Liu et al. [24] Cerquitelli et al. [8] Bamgboye et al. [4] Lin et al. [23] Syafrudin et al. [40] Jeong et al. [16] Cui et al. [10] Sanyal et al. [33] Total ( ): 20”
Citations
Cites
Scikit-learn: Machine Learning in Python
Pedregosa, F., Varoquaux, G., Gramfort, A., Michel, V., Thirion, B., Grisel, O., Blondel, M., Müller, A., Nothman, J., Louppe, G., et al. (2012) · arXiv · doi:10.48550/arxiv.1201.0490 · Cited by 71,016
The WEKA data mining software: an update
Hall, M., Frank, E., Holmes, G., Pfahringer, B., Reutemann, P., & Witten, I. H. (2009) · ACM SIGKDD Explorations Newsletter · doi:10.1145/1656274.1656278 · Cited by 17,750
Learning the parts of objects by non-negative matrix factorization
Lee, D. D., & Seung, H. S. (1999) · Nature · doi:10.1038/44565 · Cited by 13,868
TensorFlow: A system for large-scale machine learning
Abadi, M., Barham, P., Chen, J., Chen, Z., Davis, A., Dean, J., Devin, M., Ghemawat, S., Irving, G., Isard, M., et al. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1605.08695 · Cited by 11,822
Abdi, H., & Williams, L. J. (2010) · WIREs Computational Statistics · doi:10.1002/wics.101 · Cited by 11,104
LOF: identifying density-based local outliers
Breunig, M. M., Kriegel, H.-P., Ng, R. T., & Sander, J. (2000) · ACM SIGMOD Record · doi:10.1145/335191.335388 · Cited by 5,207
Internet of Things in industries: A survey
Xu, L. D., He, W., & Li, S. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2300753 · Cited by 5,172 · cited 1×
“…issues [57, 61, 73, 78, 107, 123, 137], IoT applications in blockchain systems [105], applications of blockchain technologies to IoT [158], IoT big data [63], data analytics for IoT [141], IoT-based smart cities [60], IoT for agriculture [80], IoT for healthcare [101], and IoT in industries [76].”
BackgroundBeyond Accuracy: What Data Quality Means to Data Consumers
Wang, R. Y., & Strong, D. M. (1996) · Journal of Management Information Systems · doi:10.1080/07421222.1996.11518099 · Cited by 4,672
Wohlin, C. (2014) · Proceedings of the 18th International Conference on Evaluation and Assessment in Software Engineering · doi:10.1145/2601248.2601268 · Cited by 4,234
Industry 4.0: state of the art and future trends
Xu, L. D., Xu, E. L., & Li, L. (2018) · International Journal of Production Research · doi:10.1080/00207543.2018.1444806 · Cited by 3,221
Research works printed but not linked: 11
- Daniel Kuemper, Thorben Iggena, Ralf Toenjes, and Elke Pulvermueller. 2018. Valid.IoT: A framework for sensor data quality analysis and interpolation. In MMSys'18. 294-303.
- Fei Li, Stefan Nastic, and Schahram Dustdar. 2012. Data quality observation in pervasive environments. In ICCSE'12. 602-609.
- Wei-Tsung Lin, Fatih Bakir, Chandra Krintz, Rich Wolski, and Markus Mock. 2019. Data repair for distributed, event- based IoT applications. In DEBS'19. 139-150.
- Leon Wu and Gail Kaiser. 2012. An autonomic reliability improvement system for cyber-physical systems. In HASE'12. 56-61.
- Wenjin Yu, Tharam Dillon, Fahed Mostafa, Wenny Rahayu, and Yuehua Liu. 2019. Implementation of industrial cyber physical system: Challenges and solutions. In ICPS'19. 173-178.
- Martin Ester, Hans-Peter Kriegel, Jörg Sander, and Xiaowei Xu. 1996. A density-based algorithm for discovering clusters in large spatial databases with noise. In KDD'96, 226-231.
- Antonio Gulli and Sujit Pal. 2017. Deep Learning with Keras. Packt Publishing Ltd.
- DNV International. 2017. Data Quality Assessment Framework: DNV Recommended Practice-RP-0497. DNV.
- Barbara Ann Kitchenham and Stuart Charters. 2007. Guidelines for Performing Systematic Literature Re- views in Software Engineering. Technical Report EBSE 2007-001. https://www.elsevier.com/__data/promis_misc/ 525444systematicreviewsguide.pdf.
- Supavit Muangjaroen and Thaweesak Yingthawornsuk. 2012. A study of noise reduction in speech signal using fir filtering. In International Conference on Advances in Electrical and Electronics Engineering.
- Bruce Jay Nelson. 1981. Remote Procedure Call. Carnegie Mellon University.
Cited by
Ncube, M. M., & Ngulube, P. (2024) · Discover Sustainability · doi:10.1007/s43621-024-00510-0 · Cited by 115
“While studies like Goknil et al. [48] underscore the significance of robust data quality in domains such as Cyber-Physical Systems (CPS) and the Internet of Things (IoT), Bendre and Thool [37] emphasise the broader challenges inherent in big data environments.”
InfluentialBena, Y. A., Ibrahim, R. B., Mahmood, J., Al-Dhaqm, A., Alshammari, A., Nasser, M., Yusuf, M. N., & Ayemowa, M. O. (2025) · IEEE Access · doi:10.1109/access.2025.3528941 · Cited by 52
“This challenge arises due to the heterogeneity of data sources [6], generated by intelligent systems, which usually resulted in data errors, incompleteness, and inconsistency [33].”
InfluentialData Quality Assessment in Smart Manufacturing: A Review
Peixoto, T., Oliveira, B., Oliveira, Ó., & Ribeiro, F. (2025) · Systems · doi:10.3390/systems13040243 · Cited by 39
Odor-Based Molecular Communications: State-of-the-Art, Vision, Challenges, and Frontier Directions
Aktas, D., Ortlek, B. E., Civas, M., Baradari, E., Kilic, A. B., Bilgen, F. E., Okcu, A. S., Whitfield, M., Cetinkaya, O., & Akan, Ö. B. (2024) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2024.3487472 · Cited by 37
“For instance, integrating Density-Based Spatial Clustering of Applications with Noise (DBSCAN) and Random Forest has been effective in monitoring sensor signals in an IoT-based automotive manufacturing system [210].”
Industrial data space application framework for semiconductor wafer manufacturing system scheduling
Chen, D., Zhang, J., Wu, L., Zhang, P., & Wang, M. (2024) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2024.09.013 · Cited by 13
A Data Quality Pipeline for Industrial Environments: Architecture and Implementation
Peixoto, T., Oliveira, Ó., Silva, E. C. E., Oliveira, B., & Ribeiro, F. (2025) · Computers · doi:10.3390/computers14070241 · Cited by 10
An anomaly-based approach for cyber–physical threat detection using network and sensor data
Canonico, R., Esposito, G., Navarro, A., Romano, S. P., Sperlí, G., & Vignali, A. (2025) · Computer Communications · doi:10.1016/j.comcom.2025.108087 · Cited by 16
Abdeen, F. N., Sepasgozar, S. M. E., Shirowzhan, S., et al. (2025) · Smart and Sustainable Built Environment · doi:10.1108/sasbe-02-2025-0067 · Cited by 8
Nie, Y., Hicks, B. J., Nassehi, A., & Valero, M. R. (2025) · International Journal of Production Research · doi:10.1080/00207543.2025.2600550 · Cited by 16
“Finally, management should conduct weekly inspections to check data quality and equipment operation, and make timely corrections to form a closed loop of continuous improvement (Goknil et al. 2023).”
Hramov, A. E., & Pisarchik, A. N. (2025) · Applied Sciences · doi:10.3390/app152211905 · Cited by 20
Enhancing Decision-Making with Data Science in the Internet of Things Environments
Hu, L., & Shu, Y. (2023) · International Journal of Advanced Computer Science and Applications · doi:10.14569/ijacsa.2023.01409120 · Cited by 17
“IoT data is often prone to errors, noise, and inconsistencies due to device malfunctions, network issues, or data transmission errors [16].”
BackgroundEdge-based Data Profiling and Repair as a Service for IoT
Tverdal, S., Göknil, A., Nguyen, P. H., Husom, E. J., Sen, S., Ruh, J., & Flamigni, F. (2023) · International Conference on the Internet of Things (IoT) · doi:10.1145/3627050.3627065 · Cited by 11
Self-citationDigital Twin-Based Security Orchestration, Automation and Response for IoT and CPS
Nguyen, P. H., Rauniyar, A., & Niemi, T. V. (2024) · IFIP advances in information and communication technology · doi:10.1007/978-3-031-81900-1_15 · Cited by 12
Self-citationCyber Physical Systems Security: Bridging Privacy, Verification, Intelligence, and Forensics
Ramya, K., Rath, S., Venkataraman, P., & Kumar, R. (2026) · IEEE Access · doi:10.1109/access.2026.3668412 · Cited by 11
“3) The absence of standardized CPS datasets and evaluation metrics hinders comparisons across domains of DP methods [70].”
Towards an IoT-Enabled Digital Earth for SDGs: The Data Quality Challenge
Syed, M. S. B., Kelly, P., Stacey, P., & Berry, D. (2024) · IEEE Access · doi:10.1109/access.2024.3478813 · Cited by 8
“The diversity of the data sources and the volume of data collected from these smart things result in new difficulties in the DQ field, hence it is important to consider that practitioners and researchers aim to assess the fitness for use of their data sets [75], [76].”
BackgroundWang, C., Ming, X., Gao, X., & Zhang, X. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.103085 · Cited by 6
Challenges in Data Quality Management for IoT-Enhanced Event Logs
Bertrand, Y., Schultheis, A., Malburg, L., Grüger, J., Asensio, E. S., & Bergmann, R. (2025) · Lecture Notes in Business Information Processing · doi:10.1007/978-3-031-92474-3_2 · Cited by 4
Carcass and meat quality and innovation in fresh meat industry
Kongsro, J., Skramstad, T. E. B., & Alvseike, O. A. (2025) · Meat Science · doi:10.1016/j.meatsci.2025.109960 · Cited by 4
Graph intelligence for IoT and CPS security: From connectivity patterns to cyber-physical reasoning
Ahmad, H. B., Gao, H., & Latif, N. (2026) · Computer Science Review · doi:10.1016/j.cosrev.2026.100978 · Cited by 5
Haqiq, N., Zaim, M., Haqiq, A., Sbihi, M., & Ouaazizi, A. E. (2026) · IoT · doi:10.3390/iot7020046 · Cited by 8
“Studies that discuss requirements work and model-based methods argue that interoperability must be planned early with clear interface rules, data-quality checks, and lifecycle notes instead of being left to the final integration step [105].”
Current Challenges of Big Data Quality Management in Big Data Governance: A Literature Review
Bena, Y. A., Ibrahim, R. B., & Mahmood, J. (2024) · Lecture notes on data engineering and communications technologies · doi:10.1007/978-3-031-59711-4_15 · Cited by 6
Canonico, R., Lista, F., Navarro, A., Sperlí, G., & Vignali, A. (2025) · Computers & Security · doi:10.1016/j.cose.2025.104509 · Cited by 5
Context-driven Edge-based Data Sharing for Industrial IoT Data Spaces
Lam, A. N., Nguyen, P. H., & Ma, X. (2025) · ACM Symposium on Applied Computing · doi:10.1145/3672608.3707988 · Cited by 4
Self-citationSchultheis, A., Bertrand, Y., Grüger, J., Malburg, L., Bergmann, R., & Serral Asensio, E. (2025) · IoT · doi:10.3390/iot6040063 · Cited by 2
“Noise , which is another topmost issue affecting sensor data [6,7].”
Magara, T., & Phahlane, M. M. (2026) · Applied AI Letters · doi:10.1002/ail2.70017 · Cited by 5
Segovia‐Hernández, J. G., Juárez-García, M., Núñez-López, J. M., Cossio-Vargas, E., & Sánchez‐Ramírez, E. (2026) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2026.110841 · Cited by 4
Jayabal, R., Subbiah, G., Nandan, K., Selvarajan, S., Pampania, J. B., Sandeep, G. M., Tripathy, S., Smerat, A., & Kamakshi Priya, K. (2026) · Journal of Loss Prevention in the Process Industries · doi:10.1016/j.jlp.2026.106038 · Cited by 2
Idrees, R., & Maiti, A. (2024) · Applied Sciences · doi:10.3390/app14135907 · Cited by 2
Data Quality as a Service Framework for AI-Enabled Industrial Internet of Things
Göknil, A., Nguyen, P. H., Husom, E. J., Sen, S., Tverdal, S., Peysson, F., Politaki, D., & González-Velázquez, R. (2024) · International Conference on the Internet of Things (IoT) · doi:10.1145/3703790.3703794 · Cited by 6
Self-citationDeep iterative fuzzy pooling in unmanned robotics and autonomous systems for Cyber-Physical systems
Chandar, V. R. K., Baskaran, P., Mohanraj, G., et al. (2024) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/jifs-235721 · Cited by 2
RetractedImplementation and Evaluation of a Zero-Trust Security Model in Distributed Industrial Networks
Vasilică, B.-V., Anton, F. D., Mocanu, S. A., & Chiriac, B.-N. (2025) · International Conference on Control Systems and Computer Science · doi:10.1109/cscs66924.2025.00044 · Cited by 1
“The growing reliance on IoT [2] and Cloud Manufacturing [3] further amplifies the complexity of Digital Twin integration, introducing significant challenges from a cybersecurity perspective in operational processes.”
Priyanka, K., Priyadharshini, S. D., Vignesh, N. A., et al. (2025) · doi:10.1109/icmctc62214.2025.11196544 · Cited by 1
“Data quality, latency, and schema integrity are continuously monitored, faults are classified using deep learning models [9].”
Song, X., Fu, X., Xing, L., & Peng, R. (2025) · IEEE Transactions on Reliability · doi:10.1109/tr.2025.3639129 · Cited by 2
“1) Data Quality Degradation: The performance of local models depends on production data collected by terminal devices (e.g., temperature, humidity, and pressure) [19].”
Semantic Core for Sensor Telemetry Ingestion for Digital Twins
Osolinskyi, O., Lipianina-Honcharenko, K., & Komar, M. (2026) · Smart Cities · doi:10.3390/smartcities9050077 · Cited by 2
Hybrid Deep Learning Modelfor Enhancing the Streaming Efficiency of 6G Enabled Massive IoT Systems
Kaliaperumal, K., Lakshmisridevi, S., Shargunam, S., Gomathy, V., Pathak, P., & Manojkumar, B. (2024) · Wireless Personal Communications · doi:10.1007/s11277-024-11249-2 · Cited by 1
A Decision Risk Assessment and Alleviation Framework under Data Quality Challenges in Manufacturing
Yuan, T., Adjallah, K. H., Sava, A., Wang, H., & Liu, L. (2024) · Sensors · doi:10.3390/s24206586 · Cited by 4
Extensible Data Ingestion System for Industry 4.0
Oliveira, B., Oliveira, Ó., Peixoto, T., Ribeiro, F., & Pereira, C. (2024) · Lecture notes in computer science · doi:10.1007/978-3-031-73503-5_9 · Cited by 3
3D-DaVa: Enhancing 3D Point Cloud Data Reliability for Industrial Applications
Videsjorden, A. N., Göknil, A., Sen, S., Husom, E. J., & Nguyen, P. H. (2025) · Journal of Data and Information Quality · doi:10.1145/3711817 · Cited by 1
Self-citationA Mesterséges Intelligencia gyakorlati alkalmazásának lehetőségei a marketingkutatásban
Danó, G., & Kovács, S. (2025) · Marketing & Menedzsment · doi:10.15170/mm.2024.58.ksz.01.03 · Cited by 1
“Rossz vagy hiányos adatok használata potenciálisan rossz döntésekhez vezethet, ami káros hatással lehet a vállalat teljesít-ményére és hosszú távú kilátásaira (Fehrenbacher et al. 2023, Goknil et al. 2023).”
Data Quality Assessment: A Practical Application
Silva, E. C. E., Peixoto, T., Oliveira, Ó., & Oliveira, B. (2025) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-94484-0_42 · Cited by 1
Editorial: Special Issue on Software Engineering and AI for Data Quality
Khomh, F., Metzger, A., Nguyen, P. H., et al. (2024) · Journal of Data and Information Quality · doi:10.1145/3708503
Self-citationBlockchain-enabled one-stop efficient data retrieval privacy protection mechanism industry 4.0
Zhang, J., Li, S., & Pei, H. (2025) · The Journal of Supercomputing · doi:10.1007/s11227-025-07746-1 · Cited by 1
Ubiquity on the Road: Co-designing an Itinerant Ubiquitous Computing Laboratory
Pimenta, J. R. D. O. G., Junior, D. P. D. S., & Baranauskas, M. C. C. (2025) · Lecture notes in computer science · doi:10.1007/978-3-032-05002-1_10
Cybersecurity in Data-Driven Cyber Physical System
Li, F., Wu, X., & Han, H. (2025) · Springer eBooks · doi:10.1007/978-981-96-8709-1_8
Data Quality Assessment Framework for Predictive Maintenance (PdM) in Industrial AI: Review
AlKalbani, W., AlAzri, A., & Ahmad, M. N. (2025) · Lecture notes in computer science · doi:10.1007/978-981-95-3808-9_3 · Cited by 1
Unsupervised Learning and Process Analysis for Sensor Data Validation in the IIoT
Husom, E. J., Göknil, A., Mannhardt, F., Tverdal, S., Sen, S., & Nguyen, P. H. (2025) · ACM Transactions on Internet Technology · doi:10.1145/3777897
Self-citationMiranda-Montoya, D. A., Amaya, G. A. A., & Builes, J. A. J. (2025) · Journal of Engineering · doi:10.1155/je/2897164
“This paradigm enables autonomous communication among systems, equipment, end users, managers, and stakeholders, supporting product customization and real-time monitoring of industrial processes [10].”
Kashmoola, B. W., Gurabl, Z. E. A., Elbadawi, M. A., & Fatin, B. (2026) · Emerald Group Publishing Limited eBooks · doi:10.1108/978-1-83608-578-220251006
Perspective Chapter: Why Does Machine Learning Matter in Industry 4.0?
Gan, T. H. (2026) · IntechOpen eBooks · doi:10.5772/intechopen.1013751
A Subdomain-Consistent Robustness Evaluation Method for Time Series Forecasting Models
Gao, Z., He, Y., Ye, C., Shen, B., & Jiang, X. (2025) · International Symposium on Computer Science and Intelligent Control (ISCSIC) · doi:10.1109/iscsic67494.2025.11352004
“These perturbations cover all key dimensions of time series data quality issues: amplitude changes, trend variations, local anomalies, data integrity, and temporal characteristics, enabling a comprehensive robustness evaluation [15].”
Reducing Latency of Distributed Video Applications through In-Network Computing at the Edge
Silva, R. L. D., Chaves, R. C., Neto, O. A. R., et al. (2025) · doi:10.1109/nfv-sdn66355.2025.11349377
“…processes, characterized by the integration of advanced technologies, such as artificial intelligence and big data analytics, to improve efficiency, flexibility, and productivity in industrial operations while also ensuring access control to critical environments and product quality assurance [1].”
Rabadan, R., Simó, E., Aguiló-Gost, F., et al. (2026) · Electronics · doi:10.3390/electronics15030658
Optimizing Survey Engagement: Factors Influencing Questionnaire Breakoff and Respondent Segmentation
Danó, G., Kovács, S., & Surman, V. (2026) · Society and Economy · doi:10.14267/1588970x.2026.008
Modeling and Measuring Redundancy in Multisource Multimodal Data for Autonomous Driving
Zhou, Y., Sattari, M., Chen, H., & Sha, K. (2026) · IEEE International Conference on Mobility, Operations, Services and Technologies (MOST) · doi:10.1109/most69733.2026.00011
“However, the data quality work in AV is still restrained due to the absence of a systematic evaluation of data quality dimensions under specific tasks [10], the general standards and definitions for “high-quality” data [5], and limited evidence and explanation on data quality impacts [11].”
Ngan, L. H. K., Duy, L. H. A., The, P. T., & Hieu, L. N. (2026) · E3S Web of Conferences · doi:10.1051/e3sconf/202672303007
Chávez-Jácome, F., Guagalango-Minga, J., Salazar-Jácome, E., & la Torre-Guzmán, J. D. (2026) · Future Internet · doi:10.3390/fi18070364 · Cited by 1
“First, IIoT architectures must satisfy requirements of interoperability, scalability, reliability, security and low latency, especially when integrating heterogeneous devices and distributed services [7,9,28].”
InfluentialDevarajan, Y., Acharya, S. K., Jakhar, S. K., Nagappan, B., Saxena, S. A., Naik, Y., Jayabal, R., & Mehar, K. (2026) · IET Cyber-Physical Systems Theory & Applications · doi:10.1049/cps2.70062 · Cited by 3
Wang, Y., Jiang, W., & Liu, W. (2026) · Electronic Research Archive · doi:10.3934/era.2026308
Idrees, R., & Amin, M. B. (2026) · Cluster Computing · doi:10.1007/s10586-026-06416-y
Tieu, M. K., Nguyen, P. H., Lam, A. N., & Sen, S. (2026) · Communications in computer and information science · doi:10.1007/978-3-032-36547-7_6
Self-citationHijazi, A., Andó, M., & Pödör, Z. (2026) · Electronics · doi:10.3390/electronics15173987 · Cited by 1
Iakovets, A., & Haidabrus, B. (2026) · Springer tracts in mechanical engineering · doi:10.1007/978-3-032-14914-5_6
AI-Driven Valorization of a Large Repository of Raw Industrial Network Recordings Using NL2SQL
Gaffurini, M., Brunelli, E., Brandao, D., Cardieri, P., Depari, A., Ferrari, P., Gidlund, M., González, D. C., & Sisinni, E. (2026) · IEEE International Symposium on Measurement in Networking and Communications (MNC) · doi:10.1109/mnc69143.2026.11680796 · Cited by 1
“Unused historical trends or real-time industrial data may reveal patterns that imply equipment degradation, process drift, energy waste, and bottlenecks in production flow, resulting in the loss of the opportunity to improve performance or prevent failures [4].”
Vasquez-Cevallos, L., Zapata, M., Sarango-Gualan, M., Cruz, W. I. M., & Parrales–Bravo, F. (2026) · Energies · doi:10.3390/en19194499
Santana, D. A. O., Godoy, R. B., Mateus, T. H. D. A., & de Oliveira, K. R. F. (2026) · Sensors · doi:10.3390/s26196058
Melliti, Y., Aybar, U., Seebacher, U., & Legat, C. (2026) · IEEE International Conference on Automation Science and Engineering (CASE) · doi:10.1109/case69030.2026.11704188
“Similar observations appear in broader Industry 4.0 reviews [15].”
Influential
Metadata
- Authors
- Goknil, A., Nguyen, P., Sen, S., Politaki, D., Niavis, H., Pedersen, K. J., Suyuthi, A., Anand, A., & Ziegenbein, A.
- Affiliations
- SINTEF, Norway
- SINTEF (NO)
- Inlecom Innovation, Greece
- DNV (Norway) (NO)
- Technische Universität Darmstadt (DE)
- ORCID
- Venue
- ACM Computing Surveys
- Published
- 2023-07-17
- Volume
- 55
- Issue
- 14s
- Pages
- 1-38
- ISSN
- 0360-0300 (ISSN-L)
- 1557-7341
- OpenAlex
- W4366407898
- Cited by
- 84
- References
- 114
- Citations by year
- 2026: 34 · 2025: 31 · 2024: 17 · 2023: 2
- FWCI
- 3.05
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Locations
- ACM Computing Surveys (publishedVersion)
- NORA - Norwegian Open Research Archives (submittedVersion, other-oa)
- Funders
- European Union’s Horizon 2020 Research and Innovation programme (958357 (InterQ), and 958363 (DAT4.Zero))
- Topics
- Physical Sciences › Computer Science › Information Systems › Data Quality and Management
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Computer Science › Information Systems › Technology and Data Analysis
- Keywords
- data quality, cyber-physical systems, Internet of Things, Industry 4.0, sensor faults, data repair, data cleaning, data quality monitoring, data quality metrics, data quality management, industrial applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-09, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-09 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.