A Systematic Review of Data Quality in CPS and IoT for Industry 4.0
Open accessThe DOI matches its Crossref record; 143 of the 143 references it cites were found in a registry or an index; 48 of the 184 sources its claims cite were checked for support.
Abstract
The Internet of Things (IoT) and Cyber-Physical Systems (CPS) are the backbones of Industry 4.0, where data quality is crucial for decision support. Data quality in these systems can deteriorate due to sensor failures or uncertain operating environments. Our objective is to summarize and assess the research efforts that address data quality in data-centric CPS/IoT industrial applications. We systematically review the state-of-the-art data quality techniques for CPS and IoT in Industry 4.0 through a systematic literature review (SLR) study. We pose three research questions, define selection and exclusion criteria for primary studies, and extract and synthesize data from these studies to answer our research questions. Our most significant results are (i) the list of data quality issues, their sources, and application domains, (ii) the best practices and metrics for managing data quality, (iii) the software engineering solutions employed to manage data quality, and (iv) the state of the data quality techniques (data repair, cleaning, and monitoring) in the application domains. The results of our SLR can help researchers obtain an overview of existing data quality issues, techniques, metrics, and best practices. We suggest research directions that require attention from the research community for follow-up work.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
31 Valid · 16 Not valid · 34 Not checked · 134 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“For instance, Zhang et al. [156] and Liu et al. [110] study the literature on data quality based on quality issues, dimensions, and measures but exclude the data quality techniques (e.g., data repair) and their solution domain (i.e., the abstract environment where the data quality technique is developed).”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 1 INTRODUCTION
What the sources say
- Disputedcites [156] matched to “Data Quality Management in the Internet of Things” (2021) sourceExperimental — accuracy not yet measured
The paper does review data-quality issues, dimensions, and metrics (Section 4). But its Abstract says it surveys data-quality frameworks and methodologies to help choose management techniques, and Section 3 reviews those techniques and screens frameworks by their applicability to the IoT domain. That contradicts the claim that Zhang et al. exclude techniques and their solution domain; this verdict does not assess Liu et al. (LLM, conf=0.88)
Checked by a reasoning model — may be wrong.
- Not checked — no full text of the sourcecites [110] matched to “Data quality and the Internet of Things” (2020) source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“Two techniques [9,18] employ the principal component analysis [53] to filter out irrelevant attributes.”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > Noise Sample Reduction
What the sources say
- Disputedcites [9] matched to “How to Address the Data Quality Issues in Regression Models: A Guided Process for Data Cleaning” (2018) sourceExperimental — accuracy not yet measured
Our copy shows this paper does not employ PCA to filter out irrelevant attributes: Section 4.2.4 states 'we recommend using two methods of filter approach based on the absolute correlation... Chi-squared and Information Gain were the methods used', and the concluding bullet says 'the filter methods were used in DC-RM (due their fast and low computational cost)'. PCA appears only twice: as an example of the 'Projection' approach in a taxonomy of four dimensionality-reduction approaches (Section 3.3, citing Blum & Langley), and in Section 4.2.2 where the first two principal components were plotted merely to verify LOF-detected outliers. Thus the attribution that this technique uses PCA to remove irrelevant attributes is contrary to what the paper reports. (LLM, conf=0.75)
Checked by a reasoning model — may be wrong.
- Not checked — no full text of the sourcecites [18] matched to “Data construction method for the applications of workshop digital twin system” (2021) source
- Not checked — no full text of the sourcecites [53] matched to “Principal component analysis” (2010) source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“Four of these papers [7,11,19,31] investigate how data security solutions can improve data quality (in particular, data accuracy).”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 4.1.3 RQ1.3: What is the Tradeoff between Data Quality and Data Security?
What the sources say
- Not matchedcites [7]
The reference list we hold has no entry [7].
- Supportedcites [11] matched to “A trust architecture for blockchain in IoT” (2019) source
The Security Analysis section explains that the proposed data-trust module assigns low trust to tampered sensor observations when other observations do not support them. Section 5.1 evaluates its ability to distinguish honest observations from malicious ones that deviate from the true target path. This supports citing the paper as an investigation of how a security-oriented trust mechanism can protect data accuracy; the count of four refers to the citing document’s group of papers, not to this source alone. (LLM, conf=0.88)
- Not matchedcites [19]
The reference list we hold has no entry [19].
- Not checked — no full text of the sourcecites [31] source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“However, we revealed only two studies [12,27] applying ML to data repair.”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > Sensory Substitution -Fog based Analytics
What the sources say
- Not matchedcites [12]
The reference list we hold has no entry [12].
- Supportedcites [27] matched to “Improving data quality of low-cost IoT sensors in environmental monitoring networks using data fusion and machine learning approach” (2020) source
The Introduction says the study applies models to correct sensor-output errors, and §5.6 describes using an artificial neural network to calibrate sensor data. This supports citing the paper as one study applying machine learning to data repair; the count of two is the citing authors’ own finding. (LLM, conf=0.91)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“They provide only offline repair.”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 4.2.2 RQ2.2: What Are the Data Repair Techniques?
What the sources say
- Could not verifycites [44] matched to “A Dependable Time Series Analytic Framework for Cyber-Physical Systems of IoT-based Smart Grid” (2019) sourceExperimental — accuracy not yet measured
Our copy of 10.1145/3145623 contains only the institutional-repository metadata record (title/author listing, Abstract-section blocks holding BIBTEX/RIS citation exports, Scopus links and PlumX metrics such as '352 Downloads (Pure)' and 'Citation Indexes: 43'); no body text of the article is present. Searches for 'offline repair', 'data repair / missing value recovery', 'online real-time imputation versus offline batch', and 'framework architecture anomaly detection smart grid' returned nothing but these bibliographic passages, so nothing addresses whether the authors' framework provides only offline repair. Absence here is not contrary evidence, hence unverifiable rather than disputed. (LLM, conf=0.75)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
126 more claims · 25 with their cited sources checked
Create a free account to see all 215 claims and to verify the 2 references still open.
- It may state two separate claims as one. 43
- Probably not a substantial claim. 53
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Noise , which is another topmost issue affecting sensor data [6,7].”
From Case-Based Data Quality Management for IoT Logs: A Case Study Focusing on Detection of Data Quality Issues (2025) · cites this paper as [7]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Missing Data , which are widely regarded as the most prevalent issue in sensor data-excluding outliers, which are frequent but represent intrinsically valid observations [6,7].”
From Case-Based Data Quality Management for IoT Logs: A Case Study Focusing on Detection of Data Quality Issues (2025) · cites this paper as [7]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“which is known to suffer from many Data Quality Issues (DQIs), such as missing data due to faulty sensors or noise due to difficult environmental conditions [5-7].”
From Case-Based Data Quality Management for IoT Logs: A Case Study Focusing on Detection of Data Quality Issues (2025) · cites this paper as [7]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 4.3.2 RQ3.2: What Data Storage Solutions Are Used to Manage Data Quality?
“Three papers [1,7,11] employ the blockchain to ensure data security, such as the trustworthiness of sensor observations, while the blockchain is also a storage medium.”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 4.3.2 RQ3.2: What Data Storage Solutions Are Used to Manage Data Quality?
“There is an explicit dependency between the data storage solution and the data quality support (i.e., ensuring data security) in these two works.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 1 INTRODUCTION
“Number of primary studies 14 NA 57 45 NA 60 57”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > 2.4 Data Synthesis and Extraction Method
“We included 51 primary studies in our study.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > IoT Architecture Perception Network Application L1
“Nine primary studies [4,8,10,16,23,24,31,40,49] cover edge-Cloud orchestration for data processing (not necessarily data quality management).”
§ A Systematic Review of Data Quality in CPS and IoT for Industry 4.0 > IoT Architecture Perception Network Application L1
“Villalobos et al. [42] Wang et al. [44] Hui et al. [14] Mohammed et al. [26] Ahmed et al. [1] Tham et al. [41] Kufner et al. [21] Casado-vara et al. [7] Dedeoglu et al. [11] Guo et al. [13] Buschjager et al. [5] Yu et al. [49] Liu et al. [24] Cerquitelli et al. [8] Bamgboye et al. [4] Lin et al. [23] Syafrudin et al. [40] Jeong et al. [16] Cui et al. [10] Sanyal et al. [33] Total ( ): 20”
Citations
Cites
Scikit-learn: Machine Learning in Python
Pedregosa, F., Varoquaux, G., Gramfort, A., Michel, V., Thirion, B., Grisel, O., Blondel, M., Müller, A., Nothman, J., Louppe, G., et al. (2012) · arXiv · doi:10.48550/arxiv.1201.0490 · Cited by 71,016
The WEKA data mining software: an update
Hall, M., Frank, E., Holmes, G., Pfahringer, B., Reutemann, P., & Witten, I. H. (2009) · ACM SIGKDD Explorations Newsletter · doi:10.1145/1656274.1656278 · Cited by 17,750
Learning the parts of objects by non-negative matrix factorization
Lee, D. D., & Seung, H. S. (1999) · Nature · doi:10.1038/44565 · Cited by 13,868
TensorFlow: A system for large-scale machine learning
Abadi, M., Barham, P., Chen, J., Chen, Z., Davis, A., Dean, J., Devin, M., Ghemawat, S., Irving, G., Isard, M., et al. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1605.08695 · Cited by 11,822
Abdi, H., & Williams, L. J. (2010) · WIREs Computational Statistics · doi:10.1002/wics.101 · Cited by 11,104
LOF: identifying density-based local outliers
Breunig, M. M., Kriegel, H.-P., Ng, R. T., & Sander, J. (2000) · ACM SIGMOD Record · doi:10.1145/335191.335388 · Cited by 5,207
Internet of Things in industries: A survey
Xu, L. D., He, W., & Li, S. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2300753 · Cited by 5,172 · cited 1×
“…issues [57, 61, 73, 78, 107, 123, 137], IoT applications in blockchain systems [105], applications of blockchain technologies to IoT [158], IoT big data [63], data analytics for IoT [141], IoT-based smart cities [60], IoT for agriculture [80], IoT for healthcare [101], and IoT in industries [76].”
BackgroundBeyond Accuracy: What Data Quality Means to Data Consumers
Wang, R. Y., & Strong, D. M. (1996) · Journal of Management Information Systems · doi:10.1080/07421222.1996.11518099 · Cited by 4,672
Wohlin, C. (2014) · Proceedings of the 18th International Conference on Evaluation and Assessment in Software Engineering · doi:10.1145/2601248.2601268 · Cited by 4,234
Industry 4.0: state of the art and future trends
Xu, L. D., Xu, E. L., & Li, L. (2018) · International Journal of Production Research · doi:10.1080/00207543.2018.1444806 · Cited by 3,221
Industry 4.0: A survey on technologies, applications and open research issues
Lu, Y. (2017) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2017.04.005 · Cited by 3,012 · cited 1×
“Some other studies (e.g., [109, 111, 128, 136, 155, 157]) mainly focus on the literature for Industry 4.0, where CPS and IoT are considered building blocks of Industry 4.0.”
BackgroundInfluentialIndustry 4.0 technologies: Implementation patterns in manufacturing companies
Frank, A. G., Dalenogare, L. S., & Ayala, N. F. (2019) · International Journal of Production Economics · doi:10.1016/j.ijpe.2019.01.004 · Cited by 2,958 · cited 1×
“The Internet of Things (IoT) and Cyber-Physical Systems (CPS) are among the significant driving forces behind Industry 4.0 [153], in particular smart manufacturing [82].”
BackgroundInfluentialGuidelines for conducting systematic mapping studies in software engineering: An update
Petersen, K., Vakkalanka, S., & Kuzniarz, L. (2015) · Information and Software Technology · doi:10.1016/j.infsof.2015.03.007 · Cited by 2,669
The internet of things: a survey
Li, S., Xu, L. D., & Zhao, S. (2015) · Information Systems Frontiers · doi:10.1007/s10796-014-9492-7 · Cited by 2,297
Literature review of Industry 4.0 and related technologies
Oztemel, E., & Gursev, S. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1433-8 · Cited by 2,143
The Structure of Scientific Revolutions
Shapere, D. (1984) · Boston Studies in the Philosophy of Science · doi:10.1007/978-94-010-9731-4_3 · Cited by 2,129
Past, present and future of Industry 4.0—A systematic literature review and research agenda proposal
Liao, Y., Deschamps, F., Loures, E. D. F. R., & Ramos, L. F. P. (2017) · International Journal of Production Research · doi:10.1080/00207543.2017.1308576 · Cited by 2,036 · cited 1×
“Some other studies (e.g., [109, 111, 128, 136, 155, 157]) mainly focus on the literature for Industry 4.0, where CPS and IoT are considered building blocks of Industry 4.0.”
BackgroundInfluentialA Comprehensive Survey on Internet of Things (IoT) Toward 5G Wireless Systems
Chettri, L., & Bera, R. (2020) · IEEE Internet of Things Journal · doi:10.1109/jiot.2019.2948888 · Cited by 1,737 · cited 2×
“Like the secondary studies for CPS, various studies for IoT address security and privacy (e.g., [54, 56, 59, 70, 72, 73, 93, 94, 108, 115, 117, 122, 146]).”
BackgroundDigital twin and big data towards smart manufacturing and Industry 4.0: 360 degree comparison
Qi, Q., & Tao, F. (2018) · IEEE Access · doi:10.1109/access.2018.2793265 · Cited by 1,716
An Overview of Internet of Things (IoT) and Data Analytics in Agriculture: Benefits and Challenges
Elijah, O., Rahman, T. A., Orikumhi, I., Leow, C. Y., & Hindia, M. H. D. N. (2018) · IEEE Internet of Things Journal · doi:10.1109/jiot.2018.2844296 · Cited by 1,467
A Survey on IoT Security: Application Areas, Security Threats, and Solution Architectures
Hassija, V., Chamola, V., Saxena, V., Jain, D., Goyal, P., & Sikdar, B. (2019) · IEEE Access · doi:10.1109/access.2019.2924045 · Cited by 1,396
A Survey of Machine and Deep Learning Methods for Internet of Things (IoT) Security
Al-Garadi, M. A., Mohamed, A., Al-Ali, A. K., Du, X., Ali, I., & Guizani, M. (2020) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2020.2988293 · Cited by 1,392
5G Internet of Things: A survey
Li, S., Xu, L. D., & Zhao, S. (2018) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2018.01.005 · Cited by 1,293
Cyber-Physical Systems Security—A Survey
Humayed, A., Lin, J., Li, F., & Luo, B. (2017) · IEEE Internet of Things Journal · doi:10.1109/jiot.2017.2703172 · Cited by 1,185 · cited 2×
“Some of them [84, 96, 102] survey the literature for CPS security from a more general perspective; some others focus on specialized security topics such as intrusion detection systems [119], deep learning-based anomaly detection [113], physics-based attack detection [85], differential privacy [92],…”
BackgroundA survey of feature selection and feature extraction techniques in machine learning
Khalid, S., Khalil, T., & Nasreen, S. (2014) · 2014 Science and Information Conference · doi:10.1109/sai.2014.6918213 · Cited by 1,157
Current research on Internet of Things (IoT) security: A survey
Mohamad Noor, M. B., & Hassan, W. H. (2019) · Computer Networks · doi:10.1016/j.comnet.2018.11.025 · Cited by 989 · cited 2×
“The focus of most of the surveys for CPS is on security and privacy (e.g., [84, 85, 93, 96, 102, 112, 113, 119, 124]).”
BackgroundMLlib: Machine Learning in Apache Spark
Meng, X., Bradley, J. K., Yavuz, B., Sparks, E., Venkataraman, S., Liu, D., Freeman, J., Tsai, D., Amde, M., Owen, S., et al. (2015) · arXiv (Cornell University) · doi:10.48550/arxiv.1505.06807 · Cited by 940
Carroll, J. J., Dickinson, I. K., Dollin, C., et al. (2004) · doi:10.1145/1013367.1013381 · Cited by 922
Internet of Things: A survey on the security of IoT frameworks
Ammar, M., Russello, G., & Crispo, B. (2018) · Journal of Information Security and Applications · doi:10.1016/j.jisa.2017.11.002 · Cited by 850
Neshenko, N., Bou-Harb, E., Crichigno, J., Kaddoum, G., & Ghani, N. (2019) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2019.2910750 · Cited by 827
IoT: Internet of Threats? A Survey of Practical Security Vulnerabilities in Real IoT Devices
Meneghello, F., Calore, M., Zucchetto, D., Polese, M., & Zanella, A. (2019) · IEEE Internet of Things Journal · doi:10.1109/jiot.2019.2935189 · Cited by 799
A survey of intrusion detection techniques for cyber-physical systems
Mitchell, R., & Chen, I.-R. (2014) · ACM Computing Surveys · doi:10.1145/2542049 · Cited by 768
Zheng, T., Ardolino, M., Bacchetti, A., & Perona, M. (2021) · International Journal of Production Research · doi:10.1080/00207543.2020.1824085 · Cited by 728
IoT Middleware: A Survey on Issues and Enabling technologies
Ngu, A. H. H., Gutierrez, M., Metsis, V., Nepal, S., & Sheng, M. Z. (2016) · IEEE Internet of Things Journal · doi:10.1109/jiot.2016.2615180 · Cited by 681
A Survey on Industrial Internet of Things: A Cyber-Physical Systems Perspective
Xu, H., Yu, W., Griffith, D., & Golmie, N. (2018) · IEEE Access · doi:10.1109/access.2018.2884906 · Cited by 637
Internet of Things applications: A systematic review
Asghari, P., Rahmani, A. M., & Javadi, H. H. S. (2019) · Computer Networks · doi:10.1016/j.comnet.2018.12.008 · Cited by 589
Differential Privacy Techniques for Cyber Physical Systems: A Survey
Hassan, M. U., Rehmani, M. H., & Chen, J. (2020) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2019.2944748 · Cited by 564 · cited 1×
“…such as intrusion detection systems [119], deep learning-based anomaly detection [113], physics-based attack detection [85], differential privacy [92], and model-based security engineering [124] for CPS. Gunes et al. [90] and Chen et al. [71] conduct secondary studies on the applications and…”
BackgroundA survey of physics-based attack detection in cyber-physical systems
Giraldo, J., Urbina, D., Cardenas, A., Valente, J., Faisal, M., Ruths, J., Tippenhauer, N. O., Sandberg, H., & Candell, R. (2019) · ACM Computing Surveys · doi:10.1145/3203245 · Cited by 535 · cited 2×
“…specialized security topics such as intrusion detection systems [119], deep learning-based anomaly detection [113], physics-based attack detection [85], differential privacy [92], and model-based security engineering [124] for CPS. Gunes et al. [90] and Chen et al. [71] conduct secondary studies…”
BackgroundBig data for cyber physical systems in industry 4.0: a survey
Xu, L. D., & Duan, L. (2019) · Enterprise Information Systems · doi:10.1080/17517575.2018.1442934 · Cited by 526
A systematic review of IoT in healthcare: Applications, techniques, and trends
Haghi Kashani, M., Madanipour, M., Nikravan, M., Asghari, P., & Mahdipour, E. (2021) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2021.103164 · Cited by 491
Iot-based smart cities: A survey
Arasteh, H., Hosseinnezhad, V., Loia, V., Tommasetti, A., Troisi, O., Shafie-khah, M., & Siano, P. (2016) · 2016 IEEE 16th International Conference on Environment and Electrical Engineering (EEEIC) · doi:10.1109/eeeic.2016.7555867 · Cited by 464
Algorithmic bias in data-driven innovation in the age of AI
Akter, S., McCarthy, G., Sajib, S., Michael, K., Dwivedi, Y. K., D’Ambra, J., & Shen, K. N. (2021) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2021.102387 · Cited by 440
Dizdarević, J., Carpio, F., Jukan, A., & Masip Bruin, X. (2019) · RECERCAT (Consorci de Serveis Universitaris de Catalunya) · Cited by 433
Dizdarević, J., Carpio, F., Jukan, A., & Masip-Bruin, X. (2019) · ACM Computing Surveys · doi:10.1145/3292674 · Cited by 423
Syafrudin, M., Alfian, G., Fitriyani, N. L., & Rhee, J. (2018) · Sensors · doi:10.3390/s18092946 · Cited by 401
A Survey on Concepts, Applications, and Challenges in Cyber-Physical Systems
(2014) · KSII Transactions on Internet and Information Systems · doi:10.3837/tiis.2014.12.001 · Cited by 392
Data Quality in Internet of Things: A state-of-the-art survey
Karkouch, A., Mousannif, H., Al Moatassime, H., & Noel, T. (2016) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2016.08.002 · Cited by 378 · cited 1×
“Karkouch et al. [100] surveyed 14 papers published between 2012 and 2016.”
BackgroundSensor data quality: a systematic review
Teh, H. Y., Kempa-Liehr, A. W., & Wang, K. I.-K. (2020) · Journal of Big Data · doi:10.1186/s40537-020-0285-1 · Cited by 377
A survey: Internet of Things (IOT) technologies, applications and challenges
Shah, S. H., & Yaqoob, I. (2016) · 2016 IEEE Smart Energy Grid Engineering (SEGE) · doi:10.1109/sege.2016.7589556 · Cited by 348
A Survey of IoT Applications in Blockchain Systems: Architecture, Consensus, and Traffic Modeling
Lao, L., Li, Z., Hou, S., Xiao, B., Guo, S., & Yang, Y. (2021) · ACM Computing Surveys · doi:10.1145/3372136 · Cited by 304
Security and privacy in cyber-physical systems: A survey of surveys
Giraldo, J., Sarkar, E., Cardenas, A. A., Maniatakos, M., & Kantarcioglu, M. (2017) · IEEE Design & Test · doi:10.1109/mdat.2017.2709310 · Cited by 289 · cited 2×
“Some of them [84, 96, 102] survey the literature for CPS security from a more general perspective; some others focus on specialized security topics such as intrusion detection systems [119], deep learning-based anomaly detection [113], physics-based attack detection [85], differential privacy [92],…”
BackgroundMachine learning approaches to IoT security: A systematic literature review
Ahmad, R., & Alsmadi, I. (2021) · Internet of Things · doi:10.1016/j.iot.2021.100365 · Cited by 285
Khan, M. A., & Algarni, F. (2020) · IEEE Access · doi:10.1109/access.2020.3006424 · Cited by 283
The Structure of Scientific Revolutions
Shapere, D. (1964) · The Philosophical Review · doi:10.2307/2183664 · Cited by 274
Deep Learning-based Anomaly Detection in Cyber-physical Systems: Progress and Opportunities
Luo, Y., Xiao, Y., Cheng, L., Peng, G., & Yao, D. (. (2022) · ACM Computing Surveys · doi:10.1145/3453155 · Cited by 268
Cybersecurity of industrial cyber-physical systems: A review
Kayan, H., Nunes, M., Rana, O., Burnap, P., & Perera, C. (2022) · ACM Computing Surveys · doi:10.1145/3510410 · Cited by 261
Digital Twin-enabled Collaborative Data Management for Metal Additive Manufacturing Systems
Liu, C., Le Roux, L., Körner, C., Tabaste, O., Lacan, F., & Bigot, S. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.05.010 · Cited by 252
Enhancing data analysis with noise removal
Xiong, H., Pandey, G., Steinbach, M., & Kumar, V. (2006) · IEEE Transactions on Knowledge and Data Engineering · doi:10.1109/tkde.2006.46 · Cited by 233
Medical cyber-physical systems: A survey
Dey, N., Ashour, A. S., Shi, F., Fong, S. J., & Tavares, J. M. R. S. (2018) · Journal of Medical Systems · doi:10.1007/s10916-018-0921-x · Cited by 233
A Comprehensive Survey on Interoperability for IIoT: Taxonomy, Standards, and Future Directions
Hazra, A., Adhikari, M., Amgoth, T., & Srirama, S. N. (2023) · ACM Computing Surveys · doi:10.1145/3485130 · Cited by 233
A global manufacturing big data ecosystem for fault detection in predictive maintenance
Yu, W., Dillon, T., Mostafa, F., Rahayu, W., & Liu, Y. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2915846 · Cited by 225
A Survey of Network Virtualization Techniques for Internet of Things Using SDN and NFV
Alam, I., Sharif, K., Li, F., Latif, Z., Karim, M. M., Biswas, S., Nour, B., & Wang, Y. (2021) · ACM Computing Surveys · doi:10.1145/3379444 · Cited by 220
C-SPARQL: SPARQL for continuous querying
Barbieri, D. F., Braga, D., Ceri, S., Della Valle, E., & Grossniklaus, M. (2009) · Proceedings of the 18th international conference on World wide web · doi:10.1145/1526709.1526856 · Cited by 218
State of the art of cyber-physical systems security: An automatic control perspective
Zacchia Lun, Y., D’Innocenzo, A., Smarra, F., Malavolta, I., & Di Benedetto, M. D. (2019) · Journal of Systems and Software · doi:10.1016/j.jss.2018.12.006 · Cited by 211
A big data system supporting Bosch Braga Industry 4.0 strategy
Santos, M. Y., Oliveira e Sá, J., Andrade, C., Vale Lima, F., Costa, E., Costa, C., Martinho, B., & Galvão, J. (2017) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2017.07.012 · Cited by 207
Applications of Cyber-Physical System: A Literature Review
Chen, H. (2017) · Journal of Industrial Integration and Management · doi:10.1142/s2424862217500129 · Cited by 194
Analytics for the Internet of Things: A Survey
Siow, E., Tiropanis, T., & Hall, W. (2019) · ACM Computing Surveys · doi:10.1145/3204947 · Cited by 182
Duplicate record elimination in large data files
Bitton, D., & DeWitt, D. J. (1983) · ACM Transactions on Database Systems · doi:10.1145/319983.319987 · Cited by 179
Data construction method for the applications of workshop digital twin system
Kong, T., Hu, T., Zhou, T., & Ye, Y. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.02.003 · Cited by 169
Security and Privacy in IoT Using Machine Learning and Blockchain: Threats and Countermeasures
Waheed, N., He, X., Ikram, M., Usman, M., Hashmi, S. S., & Usman, M. (2021) · ACM Computing Surveys · doi:10.1145/3417987 · Cited by 169
Industry 4.0: survey from a system integration perspective
Sanchez, M. B., Expósito, E., & Aguilar, J. (2020) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2020.1775295 · Cited by 158
Machine Learning-Enabled IoT Security: Open Issues and Challenges Under Advanced Persistent Threats
Chen, Z., Liu, J., Shen, Y., Simsek, M., Kantarci, B., Mouftah, H. T., & Djukic, P. (2023) · ACM Computing Surveys · doi:10.1145/3530812 · Cited by 156
Kumar, R. (2017) · Machine Learning and Cognition in Enterprises · doi:10.1007/978-1-4842-3069-5_4 · Cited by 155
Okafor, N. U., Alghorani, Y., & Delaney, D. T. (2020) · ICT Express · doi:10.1016/j.icte.2020.06.004 · Cited by 147
A Survey on IoT Big Data: Current Status, 13 V’s Challenges, and Future Directions
Bansal, M., Chana, I., & Clarke, S. (2020) · ACM Computing Surveys · doi:10.1145/3419634 · Cited by 146
(2011) · doi:10.1109/powertech16445.2011 · Cited by 140
Time Series Data Cleaning: A Survey
Wang, X., & Wang, C. (2020) · IEEE Access · doi:10.1109/access.2019.2962152 · Cited by 132
A security-and quality-aware system architecture for Internet of Things
Sicari, S., Cappiello, C., De Pellegrini, F., Miorandi, D., & Coen-Porisini, A. (2016) · Information Systems Frontiers · doi:10.1007/s10796-014-9538-x · Cited by 130 · cited 8×
“Sicari et al. [38, 39] propose a system architecture addressing data security and quality in IoT.”
BackgroundInfluentialA secure and quality-aware prototypical architecture for the Internet of Things
Sicari, S., Rizzardi, A., Miorandi, D., Cappiello, C., & Coen-Porisini, A. (2016) · Information Systems · doi:10.1016/j.is.2016.02.003 · Cited by 127 · cited 6×
“Sicari et al. [38, 39] propose a system architecture addressing data security and quality in IoT.”
BackgroundInfluentialA trust architecture for blockchain in IoT
Dedeoglu, V., Jurdak, R., Putra, G. D., Dorri, A., & Kanhere, S. S. (2019) · Proceedings of the 16th EAI International Conference on Mobile and Ubiquitous Systems: Computing, Networking and Services · doi:10.1145/3360774.3360822 · Cited by 124 · cited 7×
“Three papers [1, 7, 11] employ the blockchain to ensure data security, such as the trustworthiness of sensor observations, while the blockchain is also a storage medium.”
BackgroundMethodInfluentialBlockchain framework for IoT data quality via edge computing
Casado-Vara, R., de la Prieta, F., Prieto, J., & Corchado, J. M. (2018) · Proceedings of the 1st Workshop on Blockchain-enabled Networked Sensor Systems · doi:10.1145/3282278.3282282 · Cited by 121
Celik, Z. B., Fernandes, E., Pauley, E., Tan, G., & McDaniel, P. (2020) · ACM Computing Surveys · doi:10.1145/3333501 · Cited by 118
Smoothing Methods in Statistics.
Faraway, J. J., & Simonoff, J. S. (1997) · Journal of the American Statistical Association · doi:10.2307/2965589 · Cited by 113
Model-based security engineering for cyber-physical systems: A systematic mapping study
Nguyen, P. H., Ali, S., & Yue, T. (2017) · Information and Software Technology · doi:10.1016/j.infsof.2016.11.004 · Cited by 107
Self-citationApplications of Distributed Ledger Technologies to the Internet of Things: A Survey
Zhu, Q., Loke, S. W., Trujillo-Rasua, R., Jiang, F., & Xiang, Y. (2020) · ACM Computing Surveys · doi:10.1145/3359982 · Cited by 104
Seghezzi, E., Locatelli, M., Pellegrini, L., Pattini, G., Giuda, G. M. D., Tagliabue, L. C., & Boella, G. (2021) · Applied Sciences · doi:10.3390/app11073108 · Cited by 101
Deep Learning-Based Domain Adaptation Method for Fault Diagnosis in Semiconductor Manufacturing
Azamfar, M., Li, X., & Lee, J. (2020) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2020.2995548 · Cited by 93
The Process Matters: Ensuring Data Veracity in Cyber-Physical Systems
Krotofil, M., Larsen, J., & Gollmann, D. (2015) · Proceedings of the 10th ACM Symposium on Information, Computer and Communications Security · doi:10.1145/2714576.2714599 · Cited by 83
Decision tree and random forest implementations for fast filtering of sensor data
Buschjager, S., & Morik, K. (2018) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2017.2710627 · Cited by 78
Data Quality Management in the Internet of Things
Zhang, L., Jeong, D., & Lee, S. (2021) · Sensors · doi:10.3390/s21175834 · Cited by 77 · cited 3×
“] Wang and Wang [148] Teh et al. [144] Liu et al. [110] Zhang et al. [156] .”
BackgroundMaschler, B., Vietz, H., Jazdi, N., & Weyrich, M. (2020) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa46521.2020.9211903 · Cited by 74
Searching the Web of Things: State of the Art, Challenges, and Solutions
Tran, N. K., Sheng, Q. Z., Babar, M. A., & Yao, L. (2017) · ACM Computing Surveys · doi:10.1145/3092695 · Cited by 72
Data quality and the Internet of Things
Liu, C., Nitschke, P., Williams, S. P., & Zowghi, D. (2020) · Computing · doi:10.1007/s00607-019-00746-z · Cited by 71
A Survey of Cybersecurity Certification for the Internet of Things
Matheu, S. N., Hernández-Ramos, J. L., Skarmeta, A. F., & Baldini, G. (2021) · ACM Computing Surveys · doi:10.1145/3410160 · Cited by 71
Continuous Training and Deployment of Deep Learning Models
Prapas, I., Derakhshan, B., Mahdiraji, A. R., & Markl, V. (2021) · Datenbank-Spektrum · doi:10.1007/s13222-021-00386-8 · Cited by 71
Shah, D., Wang, J., & He, Q. P. (2020) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2020.106970 · Cited by 69
Data quality challenges in large-scale cyber-physical systems: A systematic review
Alwan, A. A., Ciupala, M. A., Brimicombe, A. J., Ghorashi, S. A., Baravalle, A., & Falcarin, P. (2022) · Information Systems · doi:10.1016/j.is.2021.101951 · Cited by 68
Understanding and Defining Dark Data for the Manufacturing Industry
Corallo, A., Crespino, A. M., Vecchio, V. D., Lazoi, M., & Marra, M. (2023) · IEEE Transactions on Engineering Management · doi:10.1109/tem.2021.3051981 · Cited by 62
How to Address the Data Quality Issues in Regression Models: A Guided Process for Data Cleaning
Corrales, D., Corrales, J., & Ledezma, A. (2018) · Symmetry · doi:10.3390/sym10040099 · Cited by 58 · cited 10×
“[9] M24 SameasM17butstatisticalpropertiesareusedtocomputeredundancy.”
BackgroundMethodInfluentialBig Data: Trade-off between Data Quality and Data Security
Talha, M., Kalam, A. A. E., & Elmarzouqi, N. (2019) · Procedia Computer Science · doi:10.1016/j.procs.2019.04.127 · Cited by 57
Fundamentals of data normalization
Dutka, A. F., & Hansen, H. H. (1989) · Medical Entomology and Zoology · Cited by 53
Improving quality of data: IoT data aggregation using device-to-device communications
Sanyal, S., & Zhang, P. (2018) · IEEE Access · doi:10.1109/access.2018.2878640 · Cited by 51 · cited 10×
“For instance, Sanyal and Zhang [33] compute data uncertainty (M30) as the Shannon entropy of batch data without the need for cordoning reference data.”
BackgroundInfluentialCSPOT: portable, multi-scale functions-as-a-service for IoT
Wolski, R., Krintz, C., Bakir, F., George, G., & Lin, W.-T. (2019) · ACM/IEEE Symposium on Edge Computing (SEC) · doi:10.1145/3318216.3363314 · Cited by 50
Deep Learning-Based Anomaly Detection in Cyber-Physical Systems: Progress and Opportunities
Luo, Y., Xiao, Y., Cheng, L., Peng, G., & Yao, D. D. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2003.13213 · Cited by 49
Applications of distributed ledger technologies to the internet of things: a survey
(4701358), Q. Z., (13093905), S. L., (15776948), R. T. R., et al. (2025) · Figshare · Cited by 48
A Dependable Time Series Analytic Framework for Cyber-Physical Systems of IoT-based Smart Grid
Wang, C., Zhu, Y., Shi, W., Chang, V., Vijayakumar, P., Liu, B., Mao, Y., Wang, J., & Fan, Y. (2019) · ACM Transactions on Cyber-Physical Systems · doi:10.1145/3145623 · Cited by 43 · cited 10×
“…the total actual positive TP/(TP + FN) Accuracy The ratio of correct predictions to total observations (TP + TN)/(TP + TN + FP + FN) Squared Error (MSE) [34], Root Mean Squared Error (RMSE) [27, 34, 44], coefficient of determination ( R 2 ) [27, 34], and the true sensor data estimation error [33].”
BackgroundMethodInfluentialiSTEP, an Integrated Self-Tuning Engine for Predictive Maintenance in Industry 4.0
Apiletti, D., Barberis, C., Cerquitelli, T., Macii, A., Macii, E., Poncino, M., & Ventura, F. (2018) · IEEE International Symposium on Parallel and Distributed Processing with Applications (ISPA) · doi:10.1109/bdcloud.2018.00136 · Cited by 38
A three level hierarchical architecture for an efficient storage of Industry 4.0 data
Villalobos, K., Ramírez-Durán, V. J., Diez, B., Blanco, J. M., Goñi, A., & Illarramendi, A. (2020) · Computers in Industry · doi:10.1016/j.compind.2020.103257 · Cited by 35
Shi, W., Zhu, Y., Zhang, J., Tao, X., Sheng, G., Lian, Y., Wang, G., & Chen, Y. (2015) · IEEE International Conference on High Performance Computing and Communications; IEEE International Conference on Smart City; IEEE International Conference on Data Science and Systems (HPCC/SmartCity/DSS) · doi:10.1109/hpcc-css-icess.2015.16 · Cited by 30
Beyond federated learning: On confidentiality-critical machine learning applications in industry
Zellinger, W., Wieser, V., Kumar, M., Brunner, D. J., Shepeleva, N., Gálvez, R., Langer, J., Fischer, L., & Moser, B. (2021) · Procedia Computer Science · doi:10.1016/j.procs.2021.01.296 · Cited by 29
Using Trust as a Measure to Derive Data Quality in Data Shared IoT Deployments
Byabazaire, J., O'Hare, G., & Delaney, D. (2020) · 2020 29th International Conference on Computer Communications and Networks (ICCCN) · doi:10.1109/icccn49398.2020.9209633 · Cited by 28
IoT Data Qualification for a Logistic Chain Traceability Smart Contract
Ahmed, M., Taconet, C., Ould, M., Chabridon, S., & Bouzeghoub, A. (2021) · Sensors · doi:10.3390/s21062239 · Cited by 27
Villanueva Zacarias, A. G., Reimann, P., & Mitschang, B. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.215 · Cited by 26
Proto, S., Ventura, F., Apiletti, D., Cerquitelli, T., Baralis, E., Macii, E., & Macii, A. (2019) · IEEE International Congress on Big Data (BigData Congress) · doi:10.1109/bigdatacongress.2019.00032 · Cited by 26
Vertical data continuity with lean edge analytics for Industry 4.0 production
Küfner, T., Schönig, S., Jasinski, R., & Ermer, A. (2021) · Computers in Industry · doi:10.1016/j.compind.2020.103389 · Cited by 21 · cited 5×
“Nine of these papers (i.e., [2, 15, 21, 29, 34, 40, 49–51]) propose a data analytic solution as part of a CPS or IoT system.”
BackgroundInfluentialCelik, Z. B., Fernandes, E., Pauley, E., et al. (2018) · arXiv (Cornell University) · doi:10.48550/arxiv.1809.06962 · Cited by 20
Mieth, C., Meyer, A. M., & Henke, M. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.03.216 · Cited by 20
Data-Driven Prognostics for Run-To-Failure Data Employing Machine Learning Models
Saranya, E., & Sivakumar, P. B. (2020) · International Conference on Inventive Computation Technologies (ICICT) · doi:10.1109/icict48043.2020.9112411 · Cited by 17
Enhancing Data Analysis with Noise Removal
Xiong, H., Pandey, G. S., Steinbach, M. S., & Kumar, V. (2005) · Defense Technical Information Center (DTIC) · doi:10.21236/ada439494 · Cited by 17
Enabling predictive analytics for smart manufacturing through an IIoT platform
Cerquitelli, T., Nikolakis, N., Bethaz, P., Panicucci, S., Ventura, F., Macii, E., Andolina, S., Marguglio, A., Alexopoulos, K., Petrali, P., et al. (2020) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2020.11.029 · Cited by 17
Dark Data: Are we solving the right problems?
Cafarella, M., Ilyas, I. F., Kornacker, M., Kraska, T., & Re, C. (2016) · 2016 IEEE 32nd International Conference on Data Engineering (ICDE) · doi:10.1109/icde.2016.7498366 · Cited by 16 · cited 1×
“Data quality metrics are extensively studied in the literature but are not widely used by industrial IoT systems having dark data [67].”
BackgroundA Layered Quality Framework for Machine Learning-driven Data and Information Models
Azimi, S., & Pahl, C. (2020) · International Conference on Enterprise Information Systems · doi:10.5220/0009472300002546 · Cited by 13
Data Management Issues in Cyber-Physical Systems
Gudivada, V. N., Ramaswamy, S., & Srinivasan, S. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-814295-0.00007-1 · Cited by 12
Conceptual Framework for manufacturing data preprocessing of diverse input sources
Flick, D., Gellrich, S., Filz, M.-A., Li, J., Thiede, S., & Herrmann, C. A. (2019) · IEEE International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin41052.2019.8972327 · Cited by 12
(2019) · doi:10.1109/cloudsummit47114.2019.00013 · Cited by 10 · cited 9×
“[31] ,Outliers,and”
BackgroundInfluentialResource-Efficient Sensor Data Management for Autonomous Systems Using Deep Reinforcement Learning
Jeong, S., Yoo, G., Yoo, M., Yeom, I., & Woo, H. (2019) · Sensors · doi:10.3390/s19204410 · Cited by 9
Benefit from the Internet of Things right now by accessing dark data
Gimpel, G., & Alter, A. (2021) · IT Professional · doi:10.1109/mitp.2020.3025483 · Cited by 9
Semantic Stream Management Framework for Data Consistency in Smart Spaces
Bamgboye, O., Liu, X., & Cruickshank, P. (2019) · IEEE Annual International Computer Software and Applications Conference (COMPSAC) · doi:10.1109/compsac.2019.10188 · Cited by 9
Manufacturing data-driven process adaptive design method
Wei, W., Yuan, J., & Liu, A. (2020) · Procedia CIRP · doi:10.1016/j.procir.2020.02.230 · Cited by 8 · cited 8×
“Some primary studies (e.g., [30, 45]) refer to noise as unwanted and wrong data that should be removed.”
BackgroundMethodInfluentialSaybani, M. R. (2011) · Scientific Research and Essays · doi:10.5897/sre11.333 · Cited by 7 · cited 8×
“The most mentioned reasons are heterogeneous multiple data sources [4, 12, 30, 44, 50], sensor malfunctions [15, 31, 35], network problems (connection failures, communication delays) [16, 37, 40], high sampling frequency [18], and cyber attacks for data tampering [7, 31].”
BackgroundMethodInfluentialA Framework for Measuring IoT Data Quality Based on Freshness Metrics
Mohammed, F., Kayes, A. S. M., Pardede, E., & Rahayu, W. J. (2020) · IEEE International Conference on Trust, Security and Privacy in Computing and Communications (TrustCom) · doi:10.1109/trustcom50675.2020.00167 · Cited by 5
ISO 8000 : a standard for data quality
Grantner, E. (2007) · Logistics spectrum · Cited by 4
I4TSPS: a Visual-Interactive Web System for Industrial Time-Series Pre-processing
Villalobos, K., Vadillo, J., Diez, B., Calvo, B., & Illarramendi, A. (2018) · IEEE International Conference on Big Data (BigData) · doi:10.1109/bigdata.2018.8621887 · Cited by 3
Introduction to Signal Processing
(2017) · WORLD SCIENTIFIC eBooks · doi:10.1142/9789813224032_0001 · Cited by 1
Nose-Filho, K., Lotufo, A. D. P., & Minussi, C. R. (2011) · 2011 IEEE Trondheim PowerTech · doi:10.1109/ptc.2011.6019428
Monitoring and Control of Unstructured Manufacturing Big Data
Cui, Y., Kara, S., & Chan, K. C. (2020) · 2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) · doi:10.1109/ieem45057.2020.9309975
Improving quality control by early prediction of manufacturing outcomes
Weiss, S. M., Dhurandhar, A., & Baseman, R. J. (2013) · Proceedings of the 19th ACM SIGKDD international conference on Knowledge discovery and data mining · doi:10.1145/2487575.2488192
An Agricultural Machinery Operation Monitoring System Based on IoT
Hui, L., Xiaobo, Y., Zhijun, M., Lijuan, Z., & Zhong, S. (2019) · Proceedings of the 2019 2nd International Conference on Data Science and Information Technology · doi:10.1145/3352411.3352446
Active Learning for IoT Data Prioritization in Edge Nodes Over Wireless Networks
Tham, C.-K., & Rajagopalan, R. (2020) · IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon43393.2020.9255294
Packianather, M. S., Munizaga, N. L., Zouwail, S., & Saunders, M. (2019) · 2019 14th Annual Conference System of Systems Engineering (SoSE) · doi:10.1109/sysose.2019.8753830
IAI DevOps: A Systematic Framework for Prognostic Model Lifecycle Management
Guo, Z., Bao, T., Wu, W., Jin, C., & Lee, J. (2019) · 2019 Prognostics and System Health Management Conference (PHM-Qingdao) · doi:10.1109/phm-qingdao46334.2019.8943069
BigClue Analytics: A Middleware Component for Modeling Sensor Data in IoT Systems
Huru, D., Leordeanu, C., Apostol, E., Mocanu, M., & Cristea, V. (2018) · 2018 IEEE 20th International Conference on High Performance Computing and Communications; IEEE 16th International Conference on Smart City; IEEE 4th International Conference on Data Science and Systems (HPCC/SmartCity/DSS) · doi:10.1109/hpcc/smartcity/dss.2018.00148
Research works printed but not linked: 11
- Daniel Kuemper, Thorben Iggena, Ralf Toenjes, and Elke Pulvermueller. 2018. Valid.IoT: A framework for sensor data quality analysis and interpolation. In MMSys'18. 294-303.
- Fei Li, Stefan Nastic, and Schahram Dustdar. 2012. Data quality observation in pervasive environments. In ICCSE'12. 602-609.
- Wei-Tsung Lin, Fatih Bakir, Chandra Krintz, Rich Wolski, and Markus Mock. 2019. Data repair for distributed, event- based IoT applications. In DEBS'19. 139-150.
- Leon Wu and Gail Kaiser. 2012. An autonomic reliability improvement system for cyber-physical systems. In HASE'12. 56-61.
- Wenjin Yu, Tharam Dillon, Fahed Mostafa, Wenny Rahayu, and Yuehua Liu. 2019. Implementation of industrial cyber physical system: Challenges and solutions. In ICPS'19. 173-178.
- Martin Ester, Hans-Peter Kriegel, Jörg Sander, and Xiaowei Xu. 1996. A density-based algorithm for discovering clusters in large spatial databases with noise. In KDD'96, 226-231.
- Antonio Gulli and Sujit Pal. 2017. Deep Learning with Keras. Packt Publishing Ltd.
- DNV International. 2017. Data Quality Assessment Framework: DNV Recommended Practice-RP-0497. DNV.
- Barbara Ann Kitchenham and Stuart Charters. 2007. Guidelines for Performing Systematic Literature Re- views in Software Engineering. Technical Report EBSE 2007-001. https://www.elsevier.com/__data/promis_misc/ 525444systematicreviewsguide.pdf.
- Supavit Muangjaroen and Thaweesak Yingthawornsuk. 2012. A study of noise reduction in speech signal using fir filtering. In International Conference on Advances in Electrical and Electronics Engineering.
- Bruce Jay Nelson. 1981. Remote Procedure Call. Carnegie Mellon University.
Cited by
Ncube, M. M., & Ngulube, P. (2024) · Discover Sustainability · doi:10.1007/s43621-024-00510-0 · Cited by 115
“While studies like Goknil et al. [48] underscore the significance of robust data quality in domains such as Cyber-Physical Systems (CPS) and the Internet of Things (IoT), Bendre and Thool [37] emphasise the broader challenges inherent in big data environments.”
InfluentialBena, Y. A., Ibrahim, R. B., Mahmood, J., Al-Dhaqm, A., Alshammari, A., Nasser, M., Yusuf, M. N., & Ayemowa, M. O. (2025) · IEEE Access · doi:10.1109/access.2025.3528941 · Cited by 52
“This challenge arises due to the heterogeneity of data sources [6], generated by intelligent systems, which usually resulted in data errors, incompleteness, and inconsistency [33].”
InfluentialData Quality Assessment in Smart Manufacturing: A Review
Peixoto, T., Oliveira, B., Oliveira, Ó., & Ribeiro, F. (2025) · Systems · doi:10.3390/systems13040243 · Cited by 39
Odor-Based Molecular Communications: State-of-the-Art, Vision, Challenges, and Frontier Directions
Aktas, D., Ortlek, B. E., Civas, M., Baradari, E., Kilic, A. B., Bilgen, F. E., Okcu, A. S., Whitfield, M., Cetinkaya, O., & Akan, Ö. B. (2024) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2024.3487472 · Cited by 37
“For instance, integrating Density-Based Spatial Clustering of Applications with Noise (DBSCAN) and Random Forest has been effective in monitoring sensor signals in an IoT-based automotive manufacturing system [210].”
Industrial data space application framework for semiconductor wafer manufacturing system scheduling
Chen, D., Zhang, J., Wu, L., Zhang, P., & Wang, M. (2024) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2024.09.013 · Cited by 13
Metadata
- Authors
- Goknil, A., Nguyen, P., Sen, S., Politaki, D., Niavis, H., Pedersen, K. J., Suyuthi, A., Anand, A., & Ziegenbein, A.
- Affiliations
- SINTEF, Norway
- SINTEF (NO)
- Inlecom Innovation, Greece
- DNV (Norway) (NO)
- Technische Universität Darmstadt (DE)
- ORCID
- Venue
- ACM Computing Surveys
- Published
- 2023-07-17
- Volume
- 55
- Issue
- 14s
- Pages
- 1-38
- ISSN
- 0360-0300 (ISSN-L)
- 1557-7341
- OpenAlex
- W4366407898
- Cited by
- 84
- References
- 114
- Citations by year
- 2026: 34 · 2025: 31 · 2024: 17 · 2023: 2
- FWCI
- 3.05
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Locations
- ACM Computing Surveys (publishedVersion)
- NORA - Norwegian Open Research Archives (submittedVersion, other-oa)
- Funders
- European Union’s Horizon 2020 Research and Innovation programme (958357 (InterQ), and 958363 (DAT4.Zero))
- Topics
- Physical Sciences › Computer Science › Information Systems › Data Quality and Management
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Computer Science › Information Systems › Technology and Data Analysis
- Keywords
- data quality, cyber-physical systems, Internet of Things, Industry 4.0, sensor faults, data repair, data cleaning, data quality monitoring, data quality metrics, data quality management, industrial applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-09, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-09 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.