The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Rubbery Block Copolymer Electrolytes for Solid‐State Rechargeable Lithium Batteries
Open accessAbstract
For nearly 20 years, poly(ethylene oxide)‐based materials have been researched for use as electrolytes in solid‐state rechargeable lithium batteries. Technical obstacles to commercialization derive from the inability to satisfy simultaneously the electrical and mechanical performance requirements: high ionic conductivity along with resistance to flow. Herein, the synthesis and characterization of a series of poly(lauryl methacrylate)‐ b ‐poly[oligo(oxyethylene) methacrylate]‐based block copolymer electrolytes (BCEs) are reported. With both blocks in the rubbery state (i.e., having glass transition temperatures well below room temperature) these materials exhibit improved conductivities over those of glassy‐rubbery block copolymer systems. Dynamic rheological testing verifies that these materials are dimensionally stable, whereas cyclic voltammetry shows them to be electrochemically stable over a wide potential window, i.e., up to 5 V at 55°C. A solid‐state rechargeable lithium battery was constructed by laminating lithium metal, BCE, and a composite cathode composed of particles of (monoclinic), carbon black, and graphite in a BCE binder. Cycle testing showed the battery to have a high reversible capacity and good capacity retention. Li/BCE/Al cells have been cycled at temperatures as low as −20°C. © 1999 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solid Polymer Electrolytes: Fundamentals and Technological Applications
Gray, F. M. (1991) · Medical Entomology and Zoology · Cited by 973
Cited by
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Poly(ethylene oxide)-based electrolytes for lithium-ion batteries
Xue, Z., He, D., & Xie, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03471j · Cited by 2,302
Single-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries
Bouchet, R., Maria, S., Meziane, R., Aboulaich, A., Lienafa, L., Bonnet, J.-P., Phan, T. N. T., Bertin, D., Gigmes, D., Devaux, D., et al. (2013) · Nature Materials · doi:10.1038/nmat3602 · Cited by 1,425
All solid-state polymer electrolytes for high-performance lithium ion batteries
Yue, L., Ma, J., Zhang, J., Zhao, J., Dong, S., Liu, Z., Cui, G., & Chen, L. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.07.003 · Cited by 1,020
Lin, D., Liu, W., Liu, Y., Lee, H. R., Hsu, P.-C., Liu, K., & Cui, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04117 · Cited by 1,012
Patterning with block copolymer thin films
Segalman, R. A. (2005) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.12.003 · Cited by 954
Self-directed self-assembly of nanoparticle/copolymer mixtures
Lin, Y., Böker, A., He, J., Sill, K., Xiang, H., Abetz, C., Li, X., Wang, J., Emrick, T., Long, S., et al. (2005) · Nature · doi:10.1038/nature03310 · Cited by 931
Hallinan, D. T., & Balsara, N. P. (2013) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-071312-121705 · Cited by 853
Chen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
A review of lithium and non-lithium based solid state batteries
Kim, J. G., Son, B., Mukherjee, S., Schuppert, N., Bates, A., Kwon, O., Choi, M. J., Chung, H. Y., & Park, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.054 · Cited by 783
Multiscale modeling and simulation of polymer nanocomposites
Zeng, Q. H., Yu, A. B., & Lu, G. Q. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.09.002 · Cited by 657
Yang, H., & Wu, N. (2022) · Energy Science & Engineering · doi:10.1002/ese3.1163 · Cited by 586
Borodin, O., & Smith, G. D. (2006) · Macromolecules · doi:10.1021/ma052277v · Cited by 583
Perspectives for Polymer Electrolytes: A View from Fundamentals of Ionic Conductivity
Bocharova, V., & Sokolov, A. P. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02742 · Cited by 499
Stone, G. M., Mullin, S. A., Teran, A. A., Hallinan, D. T., Minor, A. M., Hexemer, A., & Balsara, N. P. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.030203jes · Cited by 438
Reducing the thickness of solid-state electrolyte membranes for high-energy lithium batteries
Wu, J., Yuan, L., Zhang, W., Li, Z., Xie, X., & Huang, Y. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02241a · Cited by 425
Interface layer formation in solid polymer electrolyte lithium batteries: an XPS study
Xu, C., Sun, B., Gustafsson, T., Edström, K., Brandell, D., & Hahlin, M. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00214h · Cited by 419
Block copolymer electrolytes for rechargeable lithium batteries
Young, W., Kuan, W., & Epps (2014) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23404 · Cited by 417
Mesophase Structure-Mechanical and Ionic Transport Correlations in Extended Amphiphilic Dendrons
Cho, B.-K., Jain, A., Gruner, S. M., & Wiesner, U. (2004) · Science · doi:10.1126/science.1100872 · Cited by 412
Recent Advancements in Polymer-Based Composite Electrolytes for Rechargeable Lithium Batteries
Tan, S.-J., Zeng, X.-X., Ma, Q., Wu, X.-W., & Guo, Y.-G. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0011-2 · Cited by 402
Effect of Molecular Weight and Salt Concentration on Conductivity of Block Copolymer Electrolytes
Panday, A., Mullin, S., Gomez, E. D., Wanakule, N., Chen, V. L., Hexemer, A., Pople, J., & Balsara, N. P. (2009) · Macromolecules · doi:10.1021/ma900451e · Cited by 361
Devaux, D., Bouchet, R., Glé, D., & Denoyel, R. (2012) · Solid State Ionics · doi:10.1016/j.ssi.2012.09.020 · Cited by 304
Block Copolymer-Directed Assembly of Nanoparticles: Forming Mesoscopically Ordered Hybrid Materials
Thompson, R. B., Ginzburg, V. V., Matsen, M. W., & Balazs, A. C. (2002) · Macromolecules · doi:10.1021/ma011563d · Cited by 283
Cheng, Z., Liu, T., Zhao, B., Shen, F., Jin, H., & Han, X. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.09.016 · Cited by 280
Nanoparticle–protein corona complexes govern the biological fates and functions of nanoparticles
Gunawan, C., Lim, M., Marquis, C. P., & Amal, R. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21526a · Cited by 277
Effect of Ion Distribution on Conductivity of Block Copolymer Electrolytes
Gomez, E. D., Panday, A., Feng, E. H., Chen, V., Stone, G. M., Minor, A. M., Kisielowski, C., Downing, K. H., Borodin, O., Smith, G. D., et al. (2009) · Nano Letters · doi:10.1021/nl900091n · Cited by 263
Chen, F., Yang, D., Zha, W., Zhu, B., Zhang, Y., Li, J., Gu, Y., Shen, Q., Zhang, L., & Sadoway, D. R. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.11.164 · Cited by 253
Self-citationPowering implantable and ingestible electronics
Yang, S., Sencadas, V., You, S. S., Jia, N. Z., Srinivasan, S. S., Huang, H., Ahmed, A. E., Liang, J. Y., & Traverso, G. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009289 · Cited by 183
Metadata
- Authors
- Soo, P. P., Huang, B., Jang, Y., Chiang, Y., Sadoway, D. R., & Mayes, A. M.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1999-01-01
- Volume
- 146
- Issue
- 1
- Pages
- 32-37
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2058284592
- Cited by
- 308
- References
- 1
- FWCI
- 9.34
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.