The DOI matches its Crossref record.
Reaction Mechanism Studies on Atomic Layer Deposition of Ruthenium and Platinum
Abstract
Reaction mechanisms in atomic layer deposition (ALD) of ruthenium from bis(cyclopentadienyl)ruthenium (RuCp 2 ) and oxygen were studied in situ with a quadruple mass spectrometer (QMS) and a quartz crystal microbalance (QCM). In addition, QMS was used to study ALD of platinum from (methylcyclopentadienyl)trimethylplatinum (MeCpPtMe 3 ) and oxygen. The QMS studies showed that the reaction by-products H 2 O and CO 2 were released during both the oxygen and the metal precursor pulses. Adsorbed oxygen layer on the metal surface thus oxidizes part of the ligands during the metal precursor pulse. The remaining ligand species become oxidized and a new layer of adsorbed oxygen forms on the surface during the following oxygen pulse. The QCM analysis of the ruthenium process showed a mass decrease during the RuCp 2 pulse and a mass increase during the oxygen pulse, which further supports the proposed mechanism.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814
Surface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process
Puurunen, R. L. (2005) · Journal of Applied Physics · doi:10.1063/1.1940727 · Cited by 2,609
Crystallinity of inorganic films grown by atomic layer deposition: Overview and general trends
Miikkulainen, V., Leskelä, M., Ritala, M., & Puurunen, R. L. (2013) · Journal of Applied Physics · doi:10.1063/1.4757907 · Cited by 1,413
Self-citationSingle-atom Catalysis Using Pt/Graphene Achieved through Atomic Layer Deposition
Sun, S., Zhang, G., Gauquelin, N., Chen, N., Zhou, J., Yang, S., Chen, W., Meng, X., Geng, D., Banis, M. N., et al. (2013) · Scientific Reports · doi:10.1038/srep01775 · Cited by 914
Bottom-up precise synthesis of stable platinum dimers on graphene
Yan, H., Lin, Y., Wu, H., Zhang, W., Sun, Z., Cheng, H., Liu, W., Wang, C., Li, J., Huang, X., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-01259-z · Cited by 633
Ritala, M., & Leskelä, M. (2002) · Handbook of Thin Films · doi:10.1016/b978-012512908-4/50005-9 · Cited by 451
Self-citationThe use of atomic layer deposition in advanced nanopatterning
Mackus, A. J. M., Bol, A. A., & Kessels, W. M. M. (2014) · Nanoscale · doi:10.1039/c4nr01954g · Cited by 380
Atomic Layer Deposition of Noble Metals and Their Oxides
Hämäläinen, J., Ritala, M., & Leskelä, M. (2014) · Chemistry of Materials · doi:10.1021/cm402221y · Cited by 361
Self-citationArea-Selective Deposition: Fundamentals, Applications, and Future Outlook
Parsons, G. N., & Clark, R. D. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c00722 · Cited by 360
Lu, J., Elam, J. W., & Stair, P. C. (2016) · Surface Science Reports · doi:10.1016/j.surfrep.2016.03.003 · Cited by 322
Understanding chemical and physical mechanisms in atomic layer deposition
Richey, N. E., de Paula, C., & Bent, S. F. (2020) · The Journal of Chemical Physics · doi:10.1063/1.5133390 · Cited by 283
Dasgupta, N. P., Liu, C., Andrews, S., Prinz, F. B., & Yang, P. (2013) · Journal of the American Chemical Society · doi:10.1021/ja405680p · Cited by 278
Lu, J., Low, K.-B., Lei, Y., Libera, J. A., Nicholls, A., Stair, P. C., & Elam, J. W. (2014) · Nature Communications · doi:10.1038/ncomms4264 · Cited by 233
Metadata
- Authors
- Aaltonen, T., Rahtu, A., Ritala, M., & Leskelä, M.
- Venue
- Electrochemical and Solid-State Letters
- Publisher
- The Electrochemical Society
- Published
- 2003
- Volume
- 6
- Issue
- 9
- Pages
- C130
- ISSN
- 1099-0062 (ISSN-L)
- OpenAlex
- W2026067267
- Cited by
- 243
- References
- 0
- FWCI
- 5.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.