The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Effect of Surface Carbon Structure on the Electrochemical Performance of LiFePO[sub 4]
Open accessAbstract
The electrochemical performance of samples synthesized by sol-gel or solid-state routes varies considerably, although their physical characteristics are similar. Raman microprobe spectroscopic analysis indicated that the structure of the residual carbon present on the surfaces of the powders differs significantly and accounts for the performance variation. Higher utilization is associated with a larger ratio of -coordinated carbon, which exhibits better electronic properties than disordered or -coordinated carbonaceous materials. Incorporation of naphthalenetetracarboxylic dianhydride during synthesis results in a more graphitic carbon coating and improves utilization of in lithium cells, although the total carbon content is not necessarily higher than that of samples prepared without the additive. This result suggests that practical energy density need not be sacrificed for power density, provided that carbon coatings are optimized by carefully choosing additives. © 2003 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tuinstra, F., & Koenig, J. L. (1970) · The Journal of Chemical Physics · doi:10.1063/1.1674108 · Cited by 10,717
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
Optimized LiFePO[sub 4] for Lithium Battery Cathodes
Yamada, A., Chung, S. C., & Hinokuma, K. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1348257 · Cited by 1,867
Approaching Theoretical Capacity of LiFePO[sub 4] at Room Temperature at High Rates
Huang, H., Yin, S.-C., & Nazar, L. F. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1396695 · Cited by 1,407
Chen, Z., & Dahn, J. R. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1498255 · Cited by 773
Lithium extraction/insertion in LiFePO4: an X-ray diffraction and Mössbauer spectroscopy study
Andersson, A. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00311-8 · Cited by 691
A Novel Concept for the Synthesis of an Improved LiFePO[sub 4] Lithium Battery Cathode
Croce, F., D’ Epifanio, A., Hassoun, J., Deptula, A., Olczac, T., & Scrosati, B. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1449302 · Cited by 571
Characterization of LiFePO4 as the cathode material for rechargeable lithium batteries
Takahashi, M., Tobishima, S., Takei, K., & Sakurai, Y. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00728-5 · Cited by 227
Cited by
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Lin, F., Markus, I. M., Nordlund, D., Weng, T.-C., Asta, M. D., Xin, H. L., & Doeff, M. M. (2014) · Nature Communications · doi:10.1038/ncomms4529 · Cited by 1,481
Self-citationDevelopment and challenges of LiFePO4cathode material for lithium-ion batteries
Yuan, L.-X., Wang, Z.-H., Zhang, W.-X., Hu, X.-L., Chen, J.-T., Huang, Y.-H., & Goodenough, J. B. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00029a · Cited by 1,301
Masquelier, C., & Croguennec, L. (2013) · Chemical Reviews · doi:10.1021/cr3001862 · Cited by 1,210
Metadata
- Authors
- Doeff, M. M., Hu, Y., McLarnon, F., & Kostecki, R.
- Venue
- Electrochemical and Solid-State Letters
- Publisher
- The Electrochemical Society
- Published
- 2003
- Volume
- 6
- Issue
- 10
- Pages
- A207
- ISSN
- 1099-0062 (ISSN-L)
- OpenAlex
- W1967712272
- Cited by
- 491
- References
- 8
- FWCI
- 16.42
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.