CoChat

Polymer Electrolyte Fuel Cells Based on Phosphoric Acid-Impregnated Poly(2,5-benzimidazole) Membranes

Asensio, Juan Antonio, Borrós, Salvador, Gómez-Romero, Pedro · 2004 · Journal of The Electrochemical Society

The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.

Abstract

Preparation and characterization of membranes of poly(2,5-benzimidazole) (ABPBI) (as thin as 20 μm) for polymer electrolyte membrane fuel cells are reported. These membranes were prepared by solution casting and then impregnated in phosphoric acid baths. Their characterization included thermogravimetric analyses, conductivity measurements, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. These membranes have high thermal stability and good proton conductivity at temperatures up to 200°C ( 6.2 × 10 − 2 S cm − 1 at 150°C and 30% relative humidity), similar to the well-known commercial polybenzimidazole (PBI). ABPBI membrane-electrode assemblies (MEAs) using commercially available E-TEK Pt/C electrodes were tested in H 2 / O 2 cells, obtaining power densities similar to those of PBI MEAs studied here as reference at temperatures of up to 180°C, humidifying the reactants at room temperature. © 2004 The Electrochemical Society. All rights reserved.

Overview

Integrity signals

Registry

Crossref · 10.1149/1.1640628

Cites

24 of 24 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 24 references

Research works printed but not linked: 14

  1. (b) Y. Wang, M.S. Thesis, Case Western Reserve University, Cleveland, OH (1998).
  2. Xing, 1999, J. New Mater. Electrochem. Syst., 2, 95
  3. N. J. Bjerrum, Q. Li, and H. A. Hjuler, World Pat. 0,118,894 (2001).
  4. F. J. Onorato, M. J. Sansone, D. W. Kim, S. M. French, and F. Maricar, U.S. Pat. 6,042,968 (2000).
  5. M. J. Sansone, F. J. Onorato, S. M. French, and F. Maricar, U.S. Pat. 6,187,231 (2001).
  6. Wang, 1996, J. Appl. Electrochem., 26, 751
  7. Savadogo, 2000, J. New Mater. Electrochem. Syst., 3, 345
  8. Savadogo, 2001, J. New Mater. Electrochem. Syst., 4, 93
  9. A. Buckley, E. D. Stuez, and G. A. Serad, inEncyclopedia of Polymer Science and Engineering, Vol. 11, H. F. Mark, Editor, pp. 572-601, Wiley, New York (1988).
  10. (b) J. A. Asensio, Ph.D. Thesis, Institut Quı́mic de Sarrià, Universitat Ramon Llull, Barcelona, Spain (2003).
  11. (a) T. E. Helminiak, C. L. Benner, F. E. Arnold, and G. Husman, U.S. Pat. 4,377,546 (1983);
  12. (b) T. E. Helminiak, C. L. Benner, F. E. Arnold, and G. Husman, U.S. Pat. 4,207,407 (1980).
  13. R. F. Savinell and M. Litt, U.S. Pat. 5,525,436 (1996).
  14. Fratini, 1986, J. Macromol. Sci., Phys., B24, 159

Cited by

Items 201–223 of 223

Metadata

Authors
Asensio, J. A., Borrós, S., & Gómez-Romero, P.
Affiliations
Consejo Superior de Investigaciones Científicas (ES)
Venue
Journal of The Electrochemical Society
Published
2004
Volume
151
Issue
2
Pages
A304
ISSN
0013-4651 (ISSN-L)
OpenAlex
W2156147067
Cited by
224
References
24
Citations by year
2026: 6 · 2025: 5 · 2024: 4 · 2023: 7 · 2022: 4 · 2021: 5 · 2020: 6 · 2019: 6 · 2018: 16 · 2017: 12 · 2016: 11 · 2015: 11 · 2014: 10 · 2013: 9 · 2012: 29
FWCI
9.11
Type
journal article
Language
en
Open access
closed
Locations
  • Journal of The Electrochemical Society (publishedVersion)
  • DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane Separation and Gas Transport
  • Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
Keywords
proton exchange membrane fuel cells, poly(2,5-benzimidazole), phosphoric acid impregnation, proton exchange membranes, membrane electrode assembly, proton conductivity, thermal stability, polybenzimidazole, hydrogen-oxygen fuel cells, high-temperature fuel cells, solvent casting

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.