The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
A fuel cell using acid doped polybenzimidazole as polymer electrolyte
Abstract
Phosphoric acid doped polybenzimidazole (PBI-poly[2,2′-(m-phenylene)-5,5′-bibenzimidazole]) has been investigated for use in a H2O2 fuel cell. The prototype fuel cell test results show that the PBI fuel cell worked quite well at 150 °C with atmospheric pressure hydrogen and oxygen which were humidified at room temperature. No membrane dehydration was observed over 200 h operating. The maximum power density of this prototype fuel cell was 0.25 W cm−2 at current density of 700 mA cm2. Further improvement of the cell performance is to be anticipated by properly impregnating the electrode structure with the polymer electrolyte. The advantage of the H2O2 fuel cell using PBI as polymer electrolyte is that the cell design and the routine maintenance can be significantly simplified because of the low electro-osmotic drag number and good proton conductivity of the PBI membrane at elevated temperature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This performance is achieved with unoptimized electrodes and is comparable to that of pure PBI.8,14”
From Development and Characterization of Acid-Doped Polybenzimidazole/Sulfonated Polysulfone Blend Polymer Electrolytes for Fuel Cells (2001) · cites this paper as [14]
Citations
Cites
Polymer Electrolyte Fuel Cell Model
Springer, T. E., Zawodzinski, T. A., & Gottesfeld, S. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085971 · Cited by 3,528
A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell
Bernardi, D. M., & Verbrugge, M. W. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221251 · Cited by 1,368
Acid‐Doped Polybenzimidazoles: A New Polymer Electrolyte
Wainright, J. S., Wang, J. ‐., Weng, D., Savinell, R. F., & Litt, M. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044337 · Cited by 1,251
Self-citationA Water and Heat Management Model for Proton‐Exchange‐Membrane Fuel Cells
Nguyen, T. V., & White, R. E. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220792 · Cited by 1,134
Thin-film catalyst layers for polymer electrolyte fuel cell electrodes
Wilson, M. S., & Gottesfeld, S. (1992) · Journal of Applied Electrochemistry · doi:10.1007/bf01093004 · Cited by 871
Water and Thermal Management in Solid‐Polymer‐Electrolyte Fuel Cells
Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220960 · Cited by 669
A Comparative Study of Water Uptake By and Transport Through Ionomeric Fuel Cell Membranes
Zawodzinski, T. A., Springer, T. E., Davey, J., Jestel, R., Lopez, C., Valerio, J., & Gottesfeld, S. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220749 · Cited by 661
High Performance Catalyzed Membranes of Ultra‐low Pt Loadings for Polymer Electrolyte Fuel Cells
Wilson, M. S., & Gottesfeld, S. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069277 · Cited by 510
Experimental Determination of the Transport Number of Water in Nafion 117 Membrane
Fuller, T. F., & Newman, J. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069407 · Cited by 278
Taylor, E. J., Anderson, E. B., & Vilambi, N. R. K. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069439 · Cited by 212
Cited by
Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation
Borup, R., Meyers, J., Pivovar, B., Kim, Y. S., Mukundan, R., Garland, N., Myers, D., Wilson, M., Garzon, F., Wood, D., et al. (2007) · Chemical Reviews · doi:10.1021/cr050182l · Cited by 3,402
Review of the proton exchange membranes for fuel cell applications
Peighambardoust, S. J., Rowshanzamir, S., & Amjadi, M. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.05.017 · Cited by 2,186
Li, Q., He, R., Jensen, J. O., & Bjerrum, N. J. (2003) · Chemistry of Materials · doi:10.1021/cm0310519 · Cited by 1,689
High temperature proton exchange membranes based on polybenzimidazoles for fuel cells
Li, Q., Jensen, J. O., Savinell, R. F., & Bjerrum, N. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.003 · Cited by 1,323
Self-citationSolid polymer electrolyte membranes for fuel cell applications—a review
Smitha, B., Sridhar, S., & Khan, A. A. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.01.035 · Cited by 1,216
Metadata
- Authors
- Wang, J.-T., Savinell, R. F., Wainright, J., Litt, M., & Yu, H.
- Affiliations
- Case Western Reserve University (US)
- Corresponding author
- Savinell, R.F.
- Venue
- Electrochimica Acta
- Publisher
- Elsevier BV
- Published
- 1996-02
- Volume
- 41
- Issue
- 2
- Pages
- 193-197
- ISSN
- 0013-4686 (ISSN-L)
- OpenAlex
- W2055026313
- Cited by
- 474
- References
- 14
- Citations by year
- 2026: 2 · 2025: 4 · 2024: 2 · 2023: 5 · 2022: 5 · 2021: 13 · 2020: 9 · 2019: 7 · 2018: 7 · 2017: 14 · 2016: 17 · 2015: 22 · 2014: 21 · 2013: 27 · 2012: 29
- FWCI
- 3.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Electrochimica Acta (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane Separation and Gas Transport
- Keywords
- fuel cells, polybenzimidazole, phosphoric acid doping, polymer electrolytes, hydrogen peroxide fuel cells, proton conductivity, electro-osmotic drag, membrane dehydration, power density, electrode impregnation, high-temperature operation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A fuel cell using acid doped polybenzimidazole as polymer electrolyte. https://app.cochat.ai/papers/10.1016/0013-4686(95)00313-4
- The paper
- Wang, J.-T., Savinell, R. F., Wainright, J., Litt, M., & Yu, H. (1996). A fuel cell using acid doped polybenzimidazole as polymer electrolyte. Electrochimica Acta. https://doi.org/10.1016/0013-4686(95)00313-4
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.