The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Design and Optimization of a Natural Graphite/Iron Phosphate Lithium-Ion Cell
Open accessAbstract
This paper uses a model for a natural graphite/lithium hexafluoro phosphate (ethylene carbonate:diethyl carbonate)/iron phosphate lithium-ion cell in order to study its performance and aid in its optimization. The model is used to generate Ragone plots for various designs, where both the average power of the cell and the peak power, defined at 80% depth-of-discharge for a 30 s pulse, are evaluated. This allows us to assess the ability of this chemistry to achieve the U.S. Department of Energy goals. The model is then used to maximize the specific energy of the cell by optimizing the design for a fixed time of discharge. The cell was optimized for the porosity and thickness of the positive electrode, while holding constant the capacity ratio of the two electrodes, the thickness and porosity of the separator, the electrolyte concentration, and the porosity of the negative electrode. The effect of the capacity ratio was qualitatively examined. The optimization was performed for discharge times ranging from 10 h to 2 min in order to map the maximum performance of this chemistry under a wide operating range. The study allows us to gauge the ability of this chemistry to be used in a particular application. The optimized designs derived in this paper are expected to be a starting point for battery manufacturers and to help decrease the time to commercialization. © 2004 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Self-citationSimulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Self-citationArora, P., Doyle, M., & White, R. E. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392512 · Cited by 586
Cited by
A review of conduction phenomena in Li-ion batteries
Park, M., Zhang, X., Chung, M., Less, G. B., & Sastry, A. M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.060 · Cited by 1,627
Discharge Model for the Lithium Iron-Phosphate Electrode
Srinivasan, V., & Newman, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1785012 · Cited by 730
Self-citationFan, L., Khodadadi, J. M., & Pesaran, A. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.050 · Cited by 534
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
A Mathematical Model of Stress Generation and Fracture in Lithium Manganese Oxide
Christensen, J., & Newman, J. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2185287 · Cited by 485
Self-citation
Metadata
- Authors
- Srinivasan, V., & Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2004
- Volume
- 151
- Issue
- 10
- Pages
- A1530
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W1964668798
- Cited by
- 227
- References
- 3
- FWCI
- 2.29
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.