The DOI matches its Crossref record.
Methanol Electro‐oxidation on Unsupported Pt‐Ru Alloys at Different Temperatures
Abstract
A wide compositional range of unsupported platinum‐ruthenium alloy catalysts were prepared by thermal decomposition of the chlorides and chloroacids. The electrocatalysts were characterized by cyclic voltammetry, x‐ray diffraction, and energy‐dispersive x‐ray spectroscopy. The BET surface area of the electrocatalysts increases with increasing Ru content up to ∼70 atomic percent (a/o) and then reaches a plateau value. Electrodes fabricated from the electrocatalysts were also evaluated as anodes for methanol electro‐oxidation in sulfuric acid over a range of temperatures. Unlike the situation for pure Pt, Ru is inactive for methanol electro‐oxidation at 25°C but becomes active at higher temperatures. The peak current observed during an anodic potential scan gradually shifts to more cathodic potentials with increasing temperature. When a comparison is made on the basis of electrode geometric surface area, a ∼50 a/o ruthenium electrocatalyst provides the highest activity for methanol electro‐oxidation at both 25 and 60°C. The methanol electro‐oxidation rate is 0.5 orders with respect to methanol concentration (between 0.1 and 2 M ) for the Pt‐Ru (∼50:50) electrode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon-Supported Pt and PtRu Nanoparticles as Catalysts for a Direct Methanol Fuel Cell
Liu, Z., Ling, X. Y., Su, X., & Lee, J. Y. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp049422b · Cited by 688
Zhou, Y., Neyerlin, K., Olson, T. S., Pylypenko, S., Bult, J., Dinh, H. N., Gennett, T., Shao, Z., & O'Hayre, R. (2010) · Energy & Environmental Science · doi:10.1039/c003710a · Cited by 644
Formation of carbon-supported PtM alloys for low temperature fuel cells: a review
Antolini, E. (2003) · Materials Chemistry and Physics · doi:10.1016/s0254-0584(02)00389-9 · Cited by 624
Rolison, D. R., Hagans, P. L., Swider, K. E., & Long, J. W. (1999) · Langmuir · doi:10.1021/la9807863 · Cited by 519
Kabbabi, A., Faure, R., Durand, R., Beden, B., Hahn, F., Leger, J.-M., & Lamy, C. (1998) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(97)00558-5 · Cited by 416
Koenigsmann, C., & Wong, S. S. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00197j · Cited by 392
Liu, Z., Lee, J. Y., Chen, W., Han, M., & Gan, L. M. (2004) · Langmuir · doi:10.1021/la035204i · Cited by 373
How To Make Electrocatalysts More Active for Direct Methanol OxidationAvoid PtRu Bimetallic Alloys!
Long, J. W., Stroud, R. M., Swider-Lyons, K. E., & Rolison, D. R. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp001954e · Cited by 347
Ordered Porous Carbons with Tunable Pore Sizes as Catalyst Supports in Direct Methanol Fuel Cell
Chai, G. S., Yoon, S. B., Yu, J.-S., Choi, J.-H., & Sung, Y.-E. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp0370472 · Cited by 325
Formation of carbon supported PtRu alloys: an XRD analysis
Antolini, E., & Cardellini, F. (2001) · Journal of Alloys and Compounds · doi:10.1016/s0925-8388(00)01260-3 · Cited by 316
Lin, Y., Cui, X., Yen, C. H., & Wai, C. M. (2005) · Langmuir · doi:10.1021/la051272o · Cited by 312
Cohen, J. L., Volpe, D. J., & Abruña, H. D. (2007) · Phys. Chem. Chem. Phys. · doi:10.1039/b612040g · Cited by 262
Deivaraj, T. C., & Lee, J. Y. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.10.010 · Cited by 174
Hyun, M.-S., Kim, S.-K., Lee, B., Peck, D., Shul, Y., & Jung, D. (2008) · Catalysis Today · doi:10.1016/j.cattod.2007.12.034 · Cited by 76
Park, K. C., Jang, I. Y., Wongwiriyapan, W., Morimoto, S., Kim, Y. J., Jung, Y. C., Toya, T., & Endo, M. (2010) · Journal of Materials Chemistry · doi:10.1039/b923153f · Cited by 66
Álvarez, G., Alcaide, F., Miguel, O., Calvillo, L., Lázaro, M. J., Quintana, J. J., Calderón, J. C., & Pastor, E. (2010) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-009-0913-3 · Cited by 35
Metadata
- Authors
- Chu, D., & Gilman, S.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1996-05-01
- Volume
- 143
- Issue
- 5
- Pages
- 1685-1690
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2093320134
- Cited by
- 275
- References
- 0
- FWCI
- 4.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.