The DOI matches its Crossref record.
Lithium Insertion in Carbon‐Silicon Composite Materials Produced by Mechanical Milling
Open accessAbstract
Carbons containing nanosize silicon particles were prepared by mechanical milling of graphite and silicon mixtures with different atomic ratios. The microstructure, morphology, and electrochemical performance of ballmilled ( x = 0, 0.1, 0.2, 0.25) were analyzed by X‐ray diffraction, Raman, high‐resolution and transmission electron microscopy, and electrochemical methods. After ballmilling, the crystal size of graphite increased but the size of silicon decreased with increasing content of silicon. Ballmilled materials reacted reversibly with lithium, and the reversible specific capacity increased from 437 mAh/g in the ballmilled pure graphite to 1039 mAh/g in ballmilled materials. The excess capacity due to the Li extraction from silicon appeared at a potential about 0.4 V vs. Li metal. After 20 charge/discharge cycles the reversible capacity of was 794 mAh/g. This behavior is a result of nanosize silicon particles decreasing the crumbling rate during Li insertion and extraction. These materials appear to be promising candidates for negative electrodes in lithium‐ion rechargeable batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells
Kasavajjula, U., Wang, C., & Appleby, A. J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.084 · Cited by 2,491
Self-citationAlloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
A review of the electrochemical performance of alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.020 · Cited by 2,140
High-performance lithium-ion anodes using a hierarchical bottom-up approach
Magasinski, A., Dixon, P., Hertzberg, B., Kvit, A., Ayala, J., & Yushin, G. (2010) · Nature Materials · doi:10.1038/nmat2725 · Cited by 2,044
Li-alloy based anode materials for Li secondary batteries
Park, C.-M., Kim, J.-H., Kim, H., & Sohn, H.-J. (2010) · Chemical Society Reviews · doi:10.1039/b919877f · Cited by 1,703
Silicon Nanotube Battery Anodes
Park, M.-H., Kim, M. G., Joo, J., Kim, K., Kim, J., Ahn, S., Cui, Y., & Cho, J. (2009) · Nano Letters · doi:10.1021/nl902058c · Cited by 1,493
Silicon based lithium-ion battery anodes: A chronicle perspective review
Zuo, X., Zhu, J., Müller-Buschbaum, P., & Cheng, Y.-J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.11.013 · Cited by 1,478
Nanostructured silicon for high capacity lithium battery anodes
Szczech, J. R., & Jin, S. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00281j · Cited by 1,395
Pinson, M. B., & Bazant, M. Z. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.044302jes · Cited by 946
Chae, S., Choi, S., Kim, N., Sung, J., & Cho, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902085 · Cited by 856
Three‐Dimensional Porous Silicon Particles for Use in High‐Performance Lithium Secondary Batteries
Kim, H., Han, B., Choo, J., & Cho, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200804355 · Cited by 851
A review of lithium and non-lithium based solid state batteries
Kim, J. G., Son, B., Mukherjee, S., Schuppert, N., Bates, A., Kwon, O., Choi, M. J., Chung, H. Y., & Park, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.054 · Cited by 783
Ng, S., Wang, J., Wexler, D., Konstantinov, K., Guo, Z., & Liu, H. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200601676 · Cited by 701
Issue and challenges facing rechargeable thin film lithium batteries
Patil, A., Patil, V., Wook Shin, D., Choi, J.-W., Paik, D.-S., & Yoon, S.-J. (2008) · Materials Research Bulletin · doi:10.1016/j.materresbull.2007.08.031 · Cited by 601
Graphene-based electrode materials for rechargeable lithium batteries
Liang, M., & Zhi, L. (2009) · Journal of Materials Chemistry · doi:10.1039/b901551e · Cited by 598
Reversible Storage of Lithium in Silver‐Coated Three‐Dimensional Macroporous Silicon
Yu, Y., Gu, L., Zhu, C., Tsukimoto, S., van Aken, P. A., & Maier, J. (2010) · Advanced Materials · doi:10.1002/adma.200903755 · Cited by 592
Zuo, W., Luo, M., Liu, X., Wu, J., Liu, H., Li, J., Winter, M., Fu, R., Yang, W., & Yang, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01694b · Cited by 429
High-Energy Batteries: Beyond Lithium-Ion and Their Long Road to Commercialisation
Gao, Y., Pan, Z., Sun, J., Liu, Z., & Wang, J. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00844-2 · Cited by 378
Lithium insertion/extraction mechanism in alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.08.114 · Cited by 366
Recent Progress in Advanced Materials for Lithium Ion Batteries
Chen, J. (2013) · Materials · doi:10.3390/ma6010156 · Cited by 359
Saint, J., Morcrette, M., Larcher, D., Laffont, L., Beattie, S., Pérès, J. ‐., Talaga, D., Couzi, M., & Tarascon, J. ‐. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600937 · Cited by 296
Yu, Z., Song, J., Gordin, M. L., Yi, R., Tang, D., & Wang, D. (2015) · Advanced Science · doi:10.1002/advs.201400020 · Cited by 254
Metadata
- Authors
- Wang, C. S., Wu, G. T., Zhang, X. B., Qi, Z. F., & Li, W. Z.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1998-08-01
- Volume
- 145
- Issue
- 8
- Pages
- 2751-2758
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2012383996
- Cited by
- 190
- References
- 0
- FWCI
- 3.89
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.