The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Towards a Fundamental Understanding of the Improved Electrochemical Performance of Silicon–Carbon Composites
Abstract
Silicon–carbon composites consisting of Si particles embedded in a dense and non‐porous carbon matrix are prepared by the pyrolysis of intimate mixtures of poly(vinyl chloride) (PVC) and Si powder at 900 °C under a flow of N 2. In contrast to bare micrometer‐sized (1–10 μm) and nanometer‐sized (10–100 nm) Si powders, which show poor cycling behavior with almost no capacity remaining after 15 cycles, the texture of the composite is seen to greatly enhance the reversibility of the alloying reaction of Si with Li. For instance, a capacity of ca. 1000 mA h g–1 is achieved for 20 cycles (0–2.0 V vs. Li+/Li) for a silicon–carbon composite containing nanometer‐sized Si particles. We also demonstrate that a mild manual grinding treatment degrades the cycling performance of the composites to levels as low as the parent Si, even though free Si is not released. The electrochemical measurements in conjunction with Raman spectroscopy data indicate that a huge stress is exerted on the Si domains by the in situ formed carbon. This carbon‐induced stress is found to disappear during the milling of the composites, indicating that the carbon‐induced pressure, along with the accompanying improvement in electrical connectivity, are the key parameters for the improved cycling behavior of Si versus Li.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
Tin-Based Amorphous Oxide: A High-Capacity Lithium-Ion-Storage Material
Idota, Y., Kubota, T., Matsufuji, A., Maekawa, Y., & Miyasaka, T. (1997) · Science · doi:10.1126/science.276.5317.1395 · Cited by 2,578
Structural Changes in Silicon Anodes during Lithium Insertion/Extraction
Obrovac, M. N., & Christensen, L. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1652421 · Cited by 1,995
Electrochemical lithiation of tin and tin-based intermetallics and composites
Winter, M., & Besenhard, J. O. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00191-7 · Cited by 1,676
Colossal Reversible Volume Changes in Lithium Alloys
Beaulieu, L. Y., Eberman, K. W., Turner, R. L., Krause, L. J., & Dahn, J. R. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1388178 · Cited by 1,241
All‐Solid Lithium Electrodes with Mixed‐Conductor Matrix
Boukamp, B. A., Lesh, G. C., & Huggins, R. A. (1981) · Journal of The Electrochemical Society · doi:10.1149/1.2127495 · Cited by 1,160
Will advanced lithium-alloy anodes have a chance in lithium-ion batteries?
Besenhard, J. O., Yang, J., & Winter, M. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02547-5 · Cited by 943
Highly Reversible Lithium Storage in Nanostructured Silicon
Graetz, J., Ahn, C. C., Yazami, R., & Fultz, B. (2003) · Electrochemical and Solid-State Letters · doi:10.1149/1.1596917 · Cited by 701
Cited by
Advanced Materials for Energy Storage
Liu, C., Li, F., Ma, L., & Cheng, H. (2010) · Advanced Materials · doi:10.1002/adma.200903328 · Cited by 4,765
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
Lithium Batteries and the Solid Electrolyte Interphase (SEI)—Progress and Outlook
Adenusi, H., Chass, G. A., Passerini, S., Tian, K. V., & Chen, G. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202203307 · Cited by 830
Scalable synthesis of silicon-nanolayer-embedded graphite for high-energy lithium-ion batteries
Ko, M., Chae, S., Ma, J., Kim, N., Lee, H.-W., Cui, Y., & Cho, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.113 · Cited by 771
Prospective materials and applications for Li secondary batteries
Jeong, G., Kim, Y.-U., Kim, H., Kim, Y.-J., & Sohn, H.-J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00831a · Cited by 616
Metadata
- Authors
- Saint, J., Morcrette, M., Larcher, D., Laffont, L., Beattie, S., Pérès, J. ‐., Talaga, D., Couzi, M., & Tarascon, J. ‐.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2007-06-20
- Volume
- 17
- Issue
- 11
- Pages
- 1765-1774
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2069463486
- Cited by
- 296
- References
- 21
- FWCI
- 11.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Towards a Fundamental Understanding of the Improved Electrochemical Performance of Silicon–Carbon Composites. https://app.cochat.ai/papers/10.1002/adfm.200600937
- The paper
- Saint, J., Morcrette, M., Larcher, D., Laffont, L., Beattie, S., Pérès, J. ‐., Talaga, D., Couzi, M., & Tarascon, J. ‐. (2007). Towards a Fundamental Understanding of the Improved Electrochemical Performance of Silicon–Carbon Composites. Advanced Functional Materials. https://doi.org/10.1002/adfm.200600937
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.