The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Two-Phase Transport in Polymer Electrolyte Fuel Cells with Bilayer Cathode Gas Diffusion Media
Open accessAbstract
A two-phase, full cell model based on the multiphase mixture framework is developed to analyze the two-phase transport in polymer electrolyte fuel cells with bilayer cathode gas diffusion media (GDM), consisting of a coarse gas diffusion layer (GDL) with an average pore size around and a microporous layer (MPL) with an average pore size ranging from 0.1 to . Effects of the relevant properties of the MPL on liquid water transport are examined, including average pore size, wettability, thickness, and porosity. It is quantitatively shown that the MPL increases the rate of water back-flow across the membrane toward the anode by increasing the hydraulic pressure differential across the membrane, consequently reducing the net amount of water to be removed from the cathode. Furthermore, it is seen that different microporous and wetting characteristics of the MPL cause a discontinuity in the liquid saturation profile at the MPL-GDL interface, which in turn reduces the amount of liquid water in the catalyst layer-MPL interface. Our analyses show that the back-flow of liquid water increases with increasing hydrophobicity and thickness, and decreasing pore size and porosity of the MPL.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer Electrolyte Fuel Cell Model
Springer, T. E., Zawodzinski, T. A., & Gottesfeld, S. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085971 · Cited by 3,528
Modeling Transport in Polymer-Electrolyte Fuel Cells
Weber, A. Z., & Newman, J. (2004) · Chemical Reviews · doi:10.1021/cr020729l · Cited by 738
The water content dependence of electro-osmotic drag in proton-conducting polymer electrolytes
Zawodzinski, T. A., Davey, J., Valerio, J., & Gottesfeld, S. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(94)00277-8 · Cited by 586
Diffusion of Water in Nafion 115 Membranes
Motupally, S., Becker, A. J., & Weidner, J. W. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393879 · Cited by 478
Cited by
Wang, Y., Chen, K. S., Mishler, J., Cho, S. C., & Adroher, X. C. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.09.030 · Cited by 3,329
Self-citationA review of water flooding issues in the proton exchange membrane fuel cell
Li, H., Tang, Y., Wang, Z., Shi, Z., Wu, S., Song, D., Zhang, J., Fatih, K., Zhang, J., Wang, H., et al. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.12.068 · Cited by 1,026
Review: Durability and Degradation Issues of PEM Fuel Cell Components
de Bruijn, F. A., Dam, V. A. T., & Janssen, G. J. M. (2008) · Fuel Cells · doi:10.1002/fuce.200700053 · Cited by 1,001
Pei, P., & Chen, H. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.03.048 · Cited by 616
A review of gas diffusion layer in PEM fuel cells: Materials and designs
Park, S., Lee, J.-W., & Popov, B. N. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.12.148 · Cited by 560
Metadata
- Authors
- Pasaogullari, U., Wang, C.-Y., & Chen, K. S.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2005
- Volume
- 152
- Issue
- 8
- Pages
- A1574
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2164474299
- Cited by
- 240
- References
- 4
- FWCI
- 16.84
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.