The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermal Modeling of the Lithium/Polymer Battery: I . Discharge Behavior of a Single Cell
Open accessAbstract
Two models are presented to predict the thermal behavior of the lithium/polymer battery. Part I presents the one‐cell model, a one‐dimensional model for predicting the thermal behavior of the lithium negative electrode/solid polymer separator/insertion positive electrode cell. Part II presents the cell‐stack model, a one‐dimensional model that uses variable heat‐generation rates calculated by the one‐cell model to predict temperature profiles in cell stacks. The one‐cell model, presented in Part I , is based on the model of Doyle et al 1 . with the addition of an energy balance in the form given by Bernardi et al 2 . Physical properties are allowed to vary with temperature. The model is general and can be used to simulate a wide range of polymeric separator materials, lithium salts, and composite insertion electrodes. Simulation results for the system are presented for isothermal operation at several temperatures and adiabatic operation at several discharge rates. Heat transfer to the surroundings is considered by defining a position‐dependent heat‐transfer coefficient for various cells in a cell stack.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Billmeyer, F. W. (1971) · Cited by 1,361
Cited by
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Thermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Electrochemically Active Polymers for Rechargeable Batteries
Novák, P., Müller, K., Santhanam, K. S. V., & Haas, O. (1997) · Chemical Reviews · doi:10.1021/cr941181o · Cited by 1,618
Jaguemont, J., Boulon, L., & Dubé, Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.034 · Cited by 1,188
Metadata
- Authors
- Pals, C. R., & Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1995-10-01
- Volume
- 142
- Issue
- 10
- Pages
- 3274-3281
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W1601811911
- Cited by
- 315
- References
- 1
- FWCI
- 9.69
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.