The DOI matches its Crossref record.
A Polymer Electrolyte for Operation at Temperatures up to 200°C
Abstract
In developing advanced fuel cells and other electrochemical reactors, it is desirable to combine the advantages of solid polymer electrolytes with the enhanced catalytic activity associated with temperatures above 100 C. This will require polymer electrolytes which retain high ionic conductivity at temperatures above the boiling point of water. One possibility is to equilibrate standard perfluorosulfonic acid polymer electrolytes such as Nafion, with a high boiling point Bronsted base such as phosphoric acid. The Nafion/H[sub 3]PO[sub 4] electrolyte has been evaluated with respect to water content, ionic conductivity and transport of oxygen, and methanol vapor. The results show that at elevated temperatures reasonably high conductivity (>0.05 [Omega][sup [minus]1] cm[sup [minus]1]) can be obtained. Methanol permeability is shown to be proportional to the methanol vapor activity and thus decreases with increasing temperature for a given partial pressure. Comparisons and distinctions between this electrolyte and pure phosphoric acid are also considered.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
Kreuer, K.-D., Paddison, S. J., Spohr, E., & Schuster, M. (2004) · Chemical Reviews · doi:10.1021/cr020715f · Cited by 2,187
Li, Q., He, R., Jensen, J. O., & Bjerrum, N. J. (2003) · Chemistry of Materials · doi:10.1021/cm0310519 · Cited by 1,689
Bose, S., Kuila, T., Nguyen, T. X. H., Kim, N. H., Lau, K.-T., & Lee, J. H. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.01.003 · Cited by 934
Asensio, J. A., Sánchez, E. M., & Gómez-Romero, P. (2010) · Chemical Society Reviews · doi:10.1039/b922650h · Cited by 746
Conductivity of PBI Membranes for High-Temperature Polymer Electrolyte Fuel Cells
Ma, Y.-L., Wainright, J. S., Litt, M. H., & Savinell, R. F. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1630037 · Cited by 716
Self-citationLi, Q., He, R., Jensen, J. O., & Bjerrum, N. J. (2004) · Fuel Cells · doi:10.1002/fuce.200400020 · Cited by 637
Yang, C., Costamagna, P., Srinivasan, S., Benziger, J., & Bocarsly, A. B. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00812-6 · Cited by 604
Organic–inorganic nanocomposite polymer electrolyte membranes for fuel cell applications
Tripathi, B. P., & Shahi, V. K. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.12.005 · Cited by 576
Polymer Electrolyte Fuel Cells
Gottesfeld, S., & Zawodzinski, T. A. (1997) · Advances in Electrochemical Sciences and Engineering · doi:10.1002/9783527616794.ch4 · Cited by 477
Proton Exchange Membrane Fuel Cells (PEMFCs): Advances and Challenges
Tellez-Cruz, M. M., Escorihuela, J., Solorza-Feria, O., & Compañ, V. (2021) · Polymers · doi:10.3390/polym13183064 · Cited by 414
Membrane electrolysis—History, current status and perspective
Paidar, M., Fateev, V., & Bouzek, K. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.05.209 · Cited by 357
Xiao, L., Zhang, H., Jana, T., Scanlon, E., Chen, R., Choe, E. ‐., Ramanathan, L. S., Yu, S., & Benicewicz, B. C. (2005) · Fuel Cells · doi:10.1002/fuce.200400067 · Cited by 332
Shao, Z.-G., Joghee, P., & Hsing, I.-M. (2004) · Journal of Membrane Science · doi:10.1016/j.memsci.2003.09.014 · Cited by 323
Anhydrous Proton-Conducting Polymers
Schuster, M. F. H., & Meyer, W. H. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022702.155349 · Cited by 313
Properties of high-temperature PEFC Celtec®-P 1000 MEAs in start/stop operation mode
Schmidt, T. J., & Baurmeister, J. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.08.055 · Cited by 291
Hasiotis, C., Qingfeng, L., Deimede, V., Kallitsis, J. K., Kontoyannis, C. G., & Bjerrum, N. J. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1366621 · Cited by 154
Metadata
- Authors
- Savinell, R., Yeager, E., Tryk, D., Landau, U., Wainright, J., Weng, D., Lux, K., Litt, M., & Rogers, C.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1994-04-01
- Volume
- 141
- Issue
- 4
- Pages
- L46-L48
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2109644360
- Cited by
- 287
- References
- 0
- FWCI
- 2.93
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- iopscience.iop.org/page/copyright (vor, 9381 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 9381 d)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.