The DOI matches its Crossref record.
Resistivity‐Dopant Density Relationship for Boron‐Doped Silicon
Open accessAbstract
New data for the resistivity‐dopant density relationship for boron‐doped silicon have been obtained for boron densities between 10 14 and 10 20 cm −3 and temperatures of 296°K (23°C) and 300°K. For dopant densities less than 10 18 cm −3 , results were calculated from resistivity and junction capacitance‐voltage measurements on processed wafers. For more heavily doped material, boron densities were obtained from the nuclear track tecnnique and from Hall effect measurements on specimens cut from bulk silicon slices. The Hall factor was assumed to be 0.8 in the calculation of hole density. The results differ significantly from the commonly used Irvin curve for boron densities greater than 10 16 cm −3 with a maximum deviation of 45% at . The data are in better agreement with the Wagner curve, but for boron densities less than 10 17 cm −3 , the measured resistivities were always higher than those predicted by the Wagner expression. Least squares fits to analytical expressions were determined for the resistivity‐dopant density product as a function of resistivity and of dopant density for temperatures of 23°C and 300°K. Similar fits were obtained for the calculated hole mobility as a function of resistivity and of hole density.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Attosecond band-gap dynamics in silicon
Schultze, M., Ramasesha, K., Pemmaraju, C. D., Sato, S. A., Whitmore, D., Gandman, A., Prell, J. S., Borja, L. J., Prendergast, D., Yabana, K., et al. (2014) · Science · doi:10.1126/science.1260311 · Cited by 553
Thermal diodes, regulators, and switches: Physical mechanisms and potential applications
Wehmeyer, G., Yabuki, T., Monachon, C., Wu, J., & Dames, C. (2017) · Applied Physics Reviews · doi:10.1063/1.5001072 · Cited by 499
Critical Conductivity Exponent for Si:B
Dai, P., Zhang, Y., & Sarachik, M. P. (1991) · Physical Review Letters · doi:10.1103/physrevlett.66.1914 · Cited by 100
Metadata
- Authors
- Thurber, W. R., Mattis, R. L., Liu, Y. M., & Filliben, J. J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1980-10-01
- Volume
- 127
- Issue
- 10
- Pages
- 2291-2294
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2114066690
- Cited by
- 213
- References
- 0
- FWCI
- 3.12
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.