The DOI matches its Crossref record.
Bistable Resistive Switching in Al[sub 2]O[sub 3] Memory Thin Films
Abstract
In this study, we investigate the resistive switching behavior of radio frequency (rf)-sputtered Al 2 O 3 thin films. It is observed that both high-conducting state (ON state) and low-conducting state (OFF state) are stable and reproducible during successive resistive switchings by dc voltage sweeping. The ratio of resistance of the ON and OFF state is over 10 3 . Such a reproducible resistive switching can be performed at 150 ° C , and the resistance of the ON state can be altered by various current compliances. The conduction mechanisms of the ON and OFF states are demonstrated as ohmic conduction and Frenkel-Poole emission, respectively. Both states, performed by dc voltage sweeping and applying short pulse, are stable over 10 4 s at a read voltage of 0.3 V and the electrical-pulse-induced resistance change (EPIR) phenomenon is demonstrated, which are all important properties for further resistive random access memory application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wong, H.-S. P., Lee, H.-Y., Yu, S., Chen, Y.-S., Wu, Y., Chen, P.-S., Lee, B., Chen, F. T., & Tsai, M.-J. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190369 · Cited by 2,757
Pan, F., Gao, S., Chen, C., Song, C., & Zeng, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.06.002 · Cited by 1,403
Recommended Methods to Study Resistive Switching Devices
Lanza, M., Wong, H. ‐. P., Pop, E., Ielmini, D., Strukov, D., Regan, B. C., Larcher, L., Villena, M. A., Yang, J. J., Goux, L., et al. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800143 · Cited by 674
The Future of Memristors: Materials Engineering and Neural Networks
Sun, K., Chen, J., & Yan, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202006773 · Cited by 482
Oxide-based RRAM materials for neuromorphic computing
Hong, X., Loy, D. J., Dananjaya, P. A., Tan, F., Ng, C., & Lew, W. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2134-6 · Cited by 307
Challenges in materials and devices for resistive-switching-based neuromorphic computing
del Valle, J., Ramírez, J. G., Rozenberg, M. J., & Schuller, I. K. (2018) · Journal of Applied Physics · doi:10.1063/1.5047800 · Cited by 254
Schindler, C., Valov, I., & Waser, R. (2009) · Physical Chemistry Chemical Physics · doi:10.1039/b901026b · Cited by 51
Aguirre, F. L., Pazos, S. M., Palumbo, F., Sune, J., & Miranda, E. (2020) · IEEE Access · doi:10.1109/access.2020.3035638 · Cited by 36
Aguirre, F. L., Gomez, N. M., Pazos, S. M., Palumbo, F., Suñé, J., & Miranda, E. (2021) · Journal of Low Power Electronics and Applications · doi:10.3390/jlpea11010009 · Cited by 14
Metadata
- Authors
- Lin, C.-Y., Wu, C.-Y., Wu, C.-Y., Hu, C., & Tseng, T.-Y.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2007
- Volume
- 154
- Issue
- 9
- Pages
- G189
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W1940819208
- Cited by
- 185
- References
- 0
- FWCI
- 7.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.