DOE Fuel Cell Program: Durability Technical Targets and Testing Protocols
The DOI matches its Crossref record.
Abstract
Fuel cells, especially those for transportation applications, must operate over a wide range of operating and cycling conditions. The desired operating range encompasses temperatures from well below the freezing point to well above the boiling point of water, relative humidity from ambient to saturated, and half-cell potentials from 0 to >1.5 V. Furthermore, the anode may be exposed to both hydrogen and air during different parts of the driving and start/stop cycles. Transportation fuel cell operation is greatly exacerbated by the transient and cyclic nature of the operating conditions. The cell/stack conditions cycle, sometimes quite rapidly, between high and low voltage, temperature, humidity, and gas composition. The cycling results in physical and chemical changes to components, sometimes with catastrophic results. This document describes DOE durability targets and the status of current fuel cell technology as well as accelerated stress test (AST) protocols to assess the performance and durability of PEM fuel cell components.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“A catalyst durability test protocol (accelerated stress test; AST) based on published fuel cell cathode durability testing was applied.25,26”
From Effect of Solvent Ratio (Ethylene Glycol/Water) in the Synthesis of Pt/C Cathode Catalysts on PEM Fuel Cell Performance (2024) · cites this paper as [25]
Citations
Cites
Still being checked.
Cited by
İnci, M., Büyük, M., Demir, M. H., & İlbey, G. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110648 · Cited by 548
A review of accelerated stress tests of MEA durability in PEM fuel cells
ZHANG, S., YUAN, X., WANG, H., MERIDA, W., ZHU, H., SHEN, J., WU, S., & ZHANG, J. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.10.012 · Cited by 525
A comprehensive review of PBI-based high temperature PEM fuel cells
Araya, S. S., Zhou, F., Liso, V., Sahlin, S. L., Vang, J. R., Thomas, S., Gao, X., Jeppesen, C., & Kær, S. K. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.09.024 · Cited by 463
Magnetic field alignment of stable proton-conducting channels in an electrolyte membrane
Liu, X., Li, Y., Xue, J., Zhu, W., Zhang, J., Yin, Y., Qin, Y., Jiao, K., Du, Q., Cheng, B., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08622-2 · Cited by 465
Zhao, J., & Li, X. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112022 · Cited by 430
Metadata
- Authors
- Garland, N., Benjamin, T., & Kopasz, J.
- Affiliations
- United States Department of Energy (US)
- Argonne National Laboratory (US)
- Venue
- ECS Transactions
- Publisher
- The Electrochemical Society
- Published
- 2007-09-28
- Volume
- 11
- Issue
- 1
- Pages
- 923-931
- ISSN
- 1938-5862 (ISSN-L)
- 1938-6737
- OpenAlex
- W2313173723
- Cited by
- 153
- References
- 0
- Citations by year
- 2026: 6 · 2025: 18 · 2024: 17 · 2023: 17 · 2022: 9 · 2021: 14 · 2020: 6 · 2019: 11 · 2018: 11 · 2017: 8 · 2016: 3 · 2015: 4 · 2014: 10 · 2013: 1 · 2012: 10
- FWCI
- 1.51
- Type
- conference paper
- Language
- en
- Open access
- closed
- Licence
- iopscience.iop.org/page/copyright (vor)
- iopscience.iop.org/info/page/text-and-data-mining (tdm)
- Locations
- ECS Transactions (publishedVersion)
- Funders
- U.S. Department of Energy
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Keywords
- fuel cell durability, proton exchange membrane fuel cells, accelerated stress testing, transportation fuel cells, cycling conditions, operating temperature range, relative humidity, half-cell potential, anode degradation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: DOE Fuel Cell Program: Durability Technical Targets and Testing Protocols. https://app.cochat.ai/papers/10.1149/1.2781004
- The paper
- Garland, N., Benjamin, T., & Kopasz, J. (2007). DOE Fuel Cell Program: Durability Technical Targets and Testing Protocols. ECS Transactions. https://doi.org/10.1149/1.2781004
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.