The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
A review of polymer electrolyte membrane fuel cell durability for vehicular applications: Degradation modes and experimental techniques
Abstract
Abstract Durability is one of the most significant technical barriers to successful commercialization of polymer electrolyte membrane (PEM) fuel cells for practical vehicular applications. It is determined by the aging (degradation) and malfunction of various components during the long-term operation. Therefore, understanding the mechanisms of degradation modes in different components is crucial to the development of high-performing and long-lasting PEM fuel cells. In this review article, the critical degradation modes in major cell components, including membranes, catalyst layers, gas diffusion layers, and distribution plates, are comprehensively reviewed and analyzed, and the potential causes are described. Advanced experimental techniques to investigate the PEM fuel cell degradation modes reported in literature include steady-state durability tests and accelerated stress tests (ASTs). The steady-state durability test is straightforward but time-consuming and costly; therefore, ASTs are often applied to accelerate durability testing. For comparable results among different research studies, the experimental protocols and conditions have to be consistent, and the details of these experimental techniques are systematically reviewed in this article. The experimental results with a focus on the degradation modes, degradation rate, and test time of the PEM fuel cells have been reported. Finally, in order to understand the root causes of degradation modes and to develop the mitigation strategies, ex-situ ASTs in literature have been reviewed, including the effects of cyclic temperature, humidity, water wet-dry, freeze-thaw, clamping stress, and vibration operations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Origin of the Overpotential for Oxygen Reduction at a Fuel-Cell Cathode
Nørskov, J. K., Rossmeisl, J., Logadottir, A., Lindqvist, L., Kitchin, J. R., Bligaard, T., & Jónsson, H. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp047349j · Cited by 13,153
Effect of sub-freezing temperatures on a PEM fuel cell performance, startup and fuel cell components
Yan, Q., Toghiani, H., Lee, Y.-W., Liang, K., & Causey, H. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.02.075 · Cited by 263
DOE Fuel Cell Program: Durability Technical Targets and Testing Protocols
Garland, N., Benjamin, T., & Kopasz, J. (2007) · ECS Transactions · doi:10.1149/1.2781004 · Cited by 153
30,000 h operation of a 70 kW stationary PEM fuel cell system using hydrogen from a chlorine factory
Verhage, A. J. L., Coolegem, J. F., Mulder, M. J. J., Yildirim, M. H., & de Bruijn, F. A. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.01.152 · Cited by 107
Shahgaldi, S., Alaefour, I., Zhao, J., & Li, X. (2018) · Fuel · doi:10.1016/j.fuel.2018.04.076 · Cited by 52
Self-citation
Cited by
Ren, P., Pei, P., Li, Y., Wu, Z., Chen, D., & Huang, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100859 · Cited by 737
Pan, M., Pan, C., Li, C., & Zhao, J. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110771 · Cited by 357
Self-citationGuo, Y., Yang, D., Li, B., Yang, D., Ming, P., & Zhang, C. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c07070 · Cited by 65
Metadata
- Authors
- Zhao, J., & Li, X.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 199
- Pages
- 112022
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2973128894
- Cited by
- 430
- References
- 5
- FWCI
- 15.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review of polymer electrolyte membrane fuel cell durability for vehicular applications: Degradation modes and experimental techniques. https://app.cochat.ai/papers/10.1016/j.enconman.2019.112022
- The paper
- Zhao, J., & Li, X. (2019). A review of polymer electrolyte membrane fuel cell durability for vehicular applications: Degradation modes and experimental techniques. Energy Conversion and Management. https://doi.org/10.1016/j.enconman.2019.112022
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.