The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Two-Dimensional Modeling of Lithium Deposition during Cell Charging
Open accessAbstract
Empirical observations have shown that lithium deposition occurs preferentially at electrode edges and that extending the negative electrode beyond the edge of the positive by approximately can prevent deposition from occurring. In this work, we use a simplified COMSOL Multiphysics model to explain this behavior and to investigate the conditions under which deposition occurs, paying particular attention to the magnitude of edge effects. Model results show that geometric effects generate overpotential at the edge of the electrode and create conditions which favor plating, despite unused capacity in the center of the electrode. Extending the negative electrode beyond the edge of the positive provides excess capacity where it is needed and prevents deposition from occurring before the cutoff potential is reached. Under the assumptions of this model, an extension of is sufficient to prevent the onset of lithium deposition until after the cutoff potential is reached.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Self-citationSimulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Self-citationArora, P., Doyle, M., & White, R. E. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392512 · Cited by 586
Cited by
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Materials for lithium-ion battery safety
Liu, K., Liu, Y., Lin, D., Pei, A., & Cui, Y. (2018) · Science Advances · doi:10.1126/sciadv.aas9820 · Cited by 1,625
Lithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Metadata
- Authors
- Tang, M., Albertus, P., & Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2009
- Volume
- 156
- Issue
- 5
- Pages
- A390
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2022656260
- Cited by
- 255
- References
- 3
- FWCI
- 8.13
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Two-Dimensional Modeling of Lithium Deposition during Cell Charging. https://app.cochat.ai/papers/10.1149/1.3095513
- The paper
- Tang, M., Albertus, P., & Newman, J. (2009). Two-Dimensional Modeling of Lithium Deposition during Cell Charging. Journal of The Electrochemical Society. https://doi.org/10.1149/1.3095513
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
