Electrochemical and Thermal Studies of Carbon-Coated LiFePO[sub 4] Cathode
The DOI matches its Crossref record.
Abstract
The carbon-coated LiFePO 4 Li-ion cathode material was studied for its electrochemical and thermal performance. This electrode exhibited a reversible capacity corresponding to more than 90% of the theoretical capacity when cycled between 2.5 and 4.0 V. The material also showed good capacity retention at high powers, implying that the carbon coating improves the electronic conductivity and hence the cycling of this material. The diffusion coefficient of this material was calculated from its electrochemical impedance spectroscopy. The heat generation during charge and discharge was studied using an isothermal microcalorimeter. Thermal studies were also investigated by using a differential scanning calorimeter and an accelerating rate calorimeter, which showed that LiFePO 4 is safer than the commonly used lithium metal oxide cathodes with layered structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
A review of lithium ion battery failure mechanisms and fire prevention strategies
Wang, Q., Mao, B., Stoliarov, S. I., & Sun, J. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.03.002 · Cited by 1,755
Recent developments in cathode materials for lithium ion batteries
Fergus, J. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.089 · Cited by 1,561
Electric vehicles batteries thermal management systems employing phase change materials
Ianniciello, L., Biwolé, P. H., & Achard, P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.071 · Cited by 426
High temperature electrical energy storage: advances, challenges, and frontiers
Lin, X., Salari, M., Arava, L. M. R., Ajayan, P. M., & Grinstaff, M. W. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00012f · Cited by 401
Abuse by External Heating, Overcharge and Short Circuiting of Commercial Lithium-Ion Battery Cells
Larsson, F., & Mellander, B.-E. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0311410jes · Cited by 319
Characteristics of lithium-ion batteries during fire tests
Larsson, F., Andersson, P., Blomqvist, P., Lorén, A., & Mellander, B.-E. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.027 · Cited by 313
Sarasketa-Zabala, E., Gandiaga, I., Rodriguez-Martinez, L. M., & Villarreal, I. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.051 · Cited by 293
Evaluating the performance of nanostructured materials as lithium-ion battery electrodes
Armstrong, M. J., O’Dwyer, C., Macklin, W. J., & Holmes, J. D. (2014) · Nano Research · doi:10.1007/s12274-013-0375-x · Cited by 285
Facile synthesis of hierarchically porous Li4Ti5O12 microspheres for high rate lithium ion batteries
Shen, L., Yuan, C., Luo, H., Zhang, X., Xu, K., & Xia, Y. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00348d · Cited by 274
Sarasketa-Zabala, E., Gandiaga, I., Martinez-Laserna, E., Rodriguez-Martinez, L. M., & Villarreal, I. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.153 · Cited by 210
Thermal Behavior Modeling of Lithium-Ion Batteries: A Comprehensive Review
Madani, S. S., Ziebert, C., & Marzband, M. (2023) · Symmetry · doi:10.3390/sym15081597 · Cited by 65
Metadata
- Authors
- Joachin, H., Kaun, T. D., Zaghib, K., & Prakash, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2009
- Volume
- 156
- Issue
- 6
- Pages
- A401
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2121659906
- Cited by
- 129
- References
- 0
- FWCI
- 7.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.