The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Experiments on and Modeling of Positive Electrodes with Multiple Active Materials for Lithium-Ion Batteries
Open accessAbstract
We adapt a previously developed lithium-ion mathematical model to treat multiple types of active materials in a single electrode; our model treats both direct (galvanostatic) and alternating (impedance) currents. We compare our simulations to experimental data from coin cells built with two positive-electrode materials (compositions based on and ) mixed in five different molar ratios and develop a model parameter set that qualitatively matches both the galvanostatic and impedance data. We found that to match the behavior of the high rate discharge curves and the impedance data (which showed a similar width of the positive-electrode kinetic arc for any composition containing ), multiple types of electronic connections between the active material and the conductive matrix were required. Our experiments showed that at high powers the specific energy from an electrode with pure exceeded that from an electrode with pure , while at low specific powers the electrode had a higher specific energy. Mixing these active materials combined power and energy characteristics. We discuss other applications in which a mixed active-material electrode may be beneficial. For example, combining a sloped-potential system with a flat-potential system may assist in electrode state-of-charge determination.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Self-citationSimulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Self-citation
Cited by
Recent developments in cathode materials for lithium ion batteries
Fergus, J. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.089 · Cited by 1,561
Multi-Domain Modeling of Lithium-Ion Batteries Encompassing Multi-Physics in Varied Length Scales
Kim, G.-H., Smith, K., Lee, K.-J., Santhanagopalan, S., & Pesaran, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3597614 · Cited by 431
Identifying Capacity Limitations in the Li/Oxygen Battery Using Experiments and Modeling
Albertus, P., Girishkumar, G., McCloskey, B., Sánchez-Carrera, R. S., Kozinsky, B., Christensen, J., & Luntz, A. C. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3527055 · Cited by 301
Self-citationElectrochemical Model Based Observer Design for a Lithium-Ion Battery
Klein, R., Chaturvedi, N. A., Christensen, J., Ahmed, J., Findeisen, R., & Kojic, A. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2011.2178604 · Cited by 291
Self-citationRahman, M. A., Anwar, S., & Izadian, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.083 · Cited by 289
Metadata
- Authors
- Albertus, P., Christensen, J., & Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2009
- Volume
- 156
- Issue
- 7
- Pages
- A606
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2054343374
- Cited by
- 189
- References
- 2
- FWCI
- 5.54
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Experiments on and Modeling of Positive Electrodes with Multiple Active Materials for Lithium-Ion Batteries. https://app.cochat.ai/papers/10.1149/1.3129656
- The paper
- Albertus, P., Christensen, J., & Newman, J. (2009). Experiments on and Modeling of Positive Electrodes with Multiple Active Materials for Lithium-Ion Batteries. Journal of The Electrochemical Society. https://doi.org/10.1149/1.3129656
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.