Selection of Optimized Materials for CBRAM Based on HT-XRD and Electrical Test Results
Open accessThe DOI matches its Crossref record.
Abstract
Among emerging memory technologies that rely on the bistable change of a resistor, the conductive bridging random access memory (CBRAM) is of particular interest due to its excellent scaling potential into the sub-20 nm range and low power operation. This technology utilizes electrochemical redox reactions to form nanoscale metallic filaments in an isolating amorphous solid electrolyte. Ge chalcogenides are candidate materials for high performance solid electrolytes in combination with Ag as the preferred metal showing high mobility and switching speed. Due to the thermal budget for a back end of the line (BEOL) processing, the layer stack materials must withstand temperatures in the range of . Pure GeS was stable up to without crystallization. For GeSe, deleterious crystallization was observed. High temperature X-ray diffraction (HT-XRD) and electrical characterization with stepwise annealing were applied to characterize the thermal stability of Ag/GeSe and Ag/GeS material systems. The higher onset temperature for solid-state reactions found with HT-XRD in the Ag/GeS system is the key for the better electrical performance compared to the Ag/GeSe system. Even after thermal annealing with a peak temperature of , excellent and stable yield numbers of more than 90% for memory elements were achieved for the sulfide, which qualifies this material system for a low temperature BEOL process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electrochemical metallization memories—fundamentals, applications, prospects
Valov, I., Waser, R., Jameson, J. R., & Kozicki, M. N. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/25/254003 · Cited by 921
Challenges in materials and devices for resistive-switching-based neuromorphic computing
del Valle, J., Ramírez, J. G., Rozenberg, M. J., & Schuller, I. K. (2018) · Journal of Applied Physics · doi:10.1063/1.5047800 · Cited by 254
Electrochemical metallization cells—blending nanoionics into nanoelectronics?
Lu, W., Jeong, D. S., Kozicki, M., & Waser, R. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.5 · Cited by 113
Truly Electroforming‐Free and Low‐Energy Memristors with Preconditioned Conductive Tunneling Paths
Yoon, J. H., Zhang, J., Ren, X., Wang, Z., Wu, H., Li, Z., Barnell, M., Wu, Q., Lauhon, L. J., Xia, Q., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702010 · Cited by 95
Metadata
- Authors
- Bruchhaus, R., Honal, M., Symanczyk, R., & Kund, M.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2009
- Volume
- 156
- Issue
- 9
- Pages
- H729
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W1997817863
- Cited by
- 40
- References
- 0
- FWCI
- 2.90
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Selection of Optimized Materials for CBRAM Based on HT-XRD and Electrical Test Results. https://app.cochat.ai/papers/10.1149/1.3160570
- The paper
- Bruchhaus, R., Honal, M., Symanczyk, R., & Kund, M. (2009). Selection of Optimized Materials for CBRAM Based on HT-XRD and Electrical Test Results. Journal of The Electrochemical Society. https://doi.org/10.1149/1.3160570
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.