Proton Conduction in PEM Fuel Cell Cathodes: Effects of Electrode Thickness and Ionomer Equivalent Weight
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The dependence of electrode proton resistivity on electrode thickness, Pt loading, ionomer loading, and ionomer equivalent weight (EW) in proton exchange membrane (PEM) fuel cell cathodes was investigated using a Pt/Vulcan catalyst. For uniform electrodes, the electrode proton resistivity is independent of the electrode thickness and Pt loading but depends on the ionomer loading and ionomer EW. There is a strong dependence on the ionomer EW when the ionomer/carbon weight (I/C) ratio is lower than 0.8. The electrode proton resistivity strongly depends on relative humidity (RH) and the density of groups in the electrode. The electrode proton resistivity becomes nearly independent of ionomer EW in electrodes when high I/C ratios are used. At low I/C ratios and low RH levels, electrodes with 850 EW ionomer exhibit better performance than those with 1050 EW. On the contrary, 850 EW electrodes give lower performance under overhumidified conditions due to electrode flooding.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Water Uptake by and Transport Through Nafion® 117 Membranes
Zawodzinski, T. A., Derouin, C., Radzinski, S., Sherman, R. J., Smith, V. T., Springer, T. E., & Gottesfeld, S. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2056194 · Cited by 1,530
Characterization of polymer electrolytes for fuel cell applications
ZAWODZINSKIJR, T., SPRINGER, T., URIBE, F., & GOTTESFELD, S. (1993) · Solid State Ionics · doi:10.1016/0167-2738(93)90295-e · Cited by 378
A theoretical study of membrane constraint in polymer‐electrolyte fuel cells
Weber, A. Z., & Newman, J. (2004) · AIChE Journal · doi:10.1002/aic.10230 · Cited by 88
Cited by
Influence of Ionomer Content in IrO2/TiO2Electrodes on PEM Water Electrolyzer Performance
Bernt, M., & Gasteiger, H. A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0231611jes · Cited by 416
Self-citationSetzler, B. P., Zhuang, Z., Wittkopf, J. A., & Yan, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.265 · Cited by 384
The Key to High Performance Low Pt Loaded Electrodes
Orfanidi, A., Madkikar, P., El-Sayed, H. A., Harzer, G. S., Kratky, T., & Gasteiger, H. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1621704jes · Cited by 276
Self-citationTang, Z., Huang, Q.-A., Wang, Y.-J., Zhang, F., Li, W., Li, A., Zhang, L., & Zhang, J. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228361 · Cited by 276
Ink solvent dependence of the ionomer distribution in the catalyst layer of a PEMFC
Orfanidi, A., Rheinländer, P. J., Schulte, N., & Gasteiger, H. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1251814jes · Cited by 169
Self-citation
Metadata
- Authors
- Liu, Y., Ji, C., Gu, W., Baker, D. R., Jorne, J., & Gasteiger, H. A.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2010
- Volume
- 157
- Issue
- 8
- Pages
- B1154
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W1985409009
- Cited by
- 86
- References
- 3
- FWCI
- 2.99
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.