Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 220

The DOI matches its Crossref record.

Lithium–Air Batteries Using SWNT/CNF Buckypapers as Air Electrodes

Zhang, G. Q., Zheng, J. P., Liang, R., Zhang, C., Wang, B., Hendrickson, M., Plichta, E. J.·2010·Journal of The Electrochemical Society

Abstract

Li–air cells based on Li foil as an anode electrode, freestanding carbon nanotube/nanofiber mixed buckypaper as an air (cathode) electrode, and organic electrolyte were assembled. The air electrode was made with single-wall carbon nanotube (SWNT) and carbon nanofiber (CNF) without any binder. The discharge capacity was strongly dependent on both the discharge current density and the thickness of the air electrode. A discharge capacity as high as 2500 mAh/g was obtained for an air electrode at a thickness of 20 μ m with a discharge current density of 0.1 mA / cm 2 ; however, it was reduced to 400 mAh/g when the thickness of the air electrode was increased to 220 μ m . For a 66 μ m thick air electrode, the discharge capacity decreased from 1600 to 340 mAh/g when the discharge current density increased from 0.1 to 0.5 mA / cm 2 . The scanning electron microscope images on surfaces of the air electrode from a fully discharged cell showed that the voids at the air side were almost fully filled by the solid deposition; however, the voids at the membrane side were still wide open.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1149/1.3446852

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 220

Metadata

Authors
Zhang, G. Q., Zheng, J. P., Liang, R., Zhang, C., Wang, B., Hendrickson, M., & Plichta, E. J.
Venue
Journal of The Electrochemical Society
Published
2010
Volume
157
Issue
8
Pages
A953
ISSN
0013-4651 (ISSN-L)
OpenAlex
W1970125014
Cited by
220
References
0
FWCI
17.94
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Lithium–Air Batteries Using SWNT/CNF Buckypapers as Air Electrodes. https://app.cochat.ai/papers/10.1149/1.3446852
The paper
Zhang, G. Q., Zheng, J. P., Liang, R., Zhang, C., Wang, B., Hendrickson, M., & Plichta, E. J. (2010). Lithium–Air Batteries Using SWNT/CNF Buckypapers as Air Electrodes. Journal of The Electrochemical Society. https://doi.org/10.1149/1.3446852

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.