The DOI matches its Crossref record.
Lithium–Air Batteries Using SWNT/CNF Buckypapers as Air Electrodes
Abstract
Li–air cells based on Li foil as an anode electrode, freestanding carbon nanotube/nanofiber mixed buckypaper as an air (cathode) electrode, and organic electrolyte were assembled. The air electrode was made with single-wall carbon nanotube (SWNT) and carbon nanofiber (CNF) without any binder. The discharge capacity was strongly dependent on both the discharge current density and the thickness of the air electrode. A discharge capacity as high as 2500 mAh/g was obtained for an air electrode at a thickness of 20 μ m with a discharge current density of 0.1 mA / cm 2 ; however, it was reduced to 400 mAh/g when the thickness of the air electrode was increased to 220 μ m . For a 66 μ m thick air electrode, the discharge capacity decreased from 1600 to 340 mAh/g when the discharge current density increased from 0.1 to 0.5 mA / cm 2 . The scanning electron microscope images on surfaces of the air electrode from a fully discharged cell showed that the voids at the air side were almost fully filled by the solid deposition; however, the voids at the membrane side were still wide open.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
“A variety of carbon substrates has been investigated by several author”
BackgroundMetal–Air Batteries with High Energy Density: Li–Air versus Zn–Air
Lee, J., Tai Kim, S., Cao, R., Choi, N., Liu, M., Lee, K. T., & Cho, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000010 · Cited by 2,286
Aprotic and Aqueous Li–O2 Batteries
Lu, J., Li, L., Park, J.-B., Sun, Y.-K., Wu, F., & Amine, K. (2014) · Chemical Reviews · doi:10.1021/cr400573b · Cited by 1,102
The Lithium–Oxygen Battery with Ether‐Based Electrolytes
Freunberger, S. A., Chen, Y., Drewett, N. E., Hardwick, L. J., Bardé, F., & Bruce, P. G. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201102357 · Cited by 1,099
Chen, D., Chen, C., Baiyee, Z. M., Shao, Z., & Ciucci, F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00073 · Cited by 936
Recent Progress in Non‐Precious Catalysts for Metal‐Air Batteries
Cao, R., Lee, J., Liu, M., & Cho, J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200013 · Cited by 763
Zhang, B., Kang, F., Tarascon, J.-M., & Kim, J.-K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.08.002 · Cited by 720
The Lithium/Air Battery: Still an Emerging System or a Practical Reality?
Grande, L., Paillard, E., Hassoun, J., Park, J., Lee, Y., Sun, Y., Passerini, S., & Scrosati, B. (2015) · Advanced Materials · doi:10.1002/adma.201403064 · Cited by 618
Prospective materials and applications for Li secondary batteries
Jeong, G., Kim, Y.-U., Kim, H., Kim, Y.-J., & Sohn, H.-J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00831a · Cited by 616
Oxygen Reactions in a Non‐Aqueous Li+ Electrolyte
Peng, Z., Freunberger, S. A., Hardwick, L. J., Chen, Y., Giordani, V., Bardé, F., Novák, P., Graham, D., Tarascon, J., & Bruce, P. G. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100879 · Cited by 595
Flexible Zn– and Li–air batteries: recent advances, challenges, and future perspectives
Tan, P., Chen, B., Xu, H., Zhang, H., Cai, W., Ni, M., Liu, M., & Shao, Z. (2017) · Energy Environ. Sci. · doi:10.1039/c7ee01913k · Cited by 583
All-carbon-nanofiber electrodes for high-energy rechargeable Li–O2 batteries
Mitchell, R. R., Gallant, B. M., Thompson, C. V., & Shao-Horn, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01496j · Cited by 553
Making Li‐Air Batteries Rechargeable: Material Challenges
Shao, Y., Ding, F., Xiao, J., Zhang, J., Xu, W., Park, S., Zhang, J., Wang, Y., & Liu, J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200688 · Cited by 541
Song, M.-K., Park, S., Alamgir, F. M., Cho, J., & Liu, M. (2011) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2011.06.001 · Cited by 540
A review of cathode materials and structures for rechargeable lithium–air batteries
Ma, Z., Yuan, X., Li, L., Ma, Z.-F., Wilkinson, D. P., Zhang, L., & Zhang, J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00838g · Cited by 485
Electrocatalysts for Nonaqueous Lithium–Air Batteries: Status, Challenges, and Perspective
Shao, Y., Park, S., Xiao, J., Zhang, J.-G., Wang, Y., & Liu, J. (2012) · ACS Catalysis · doi:10.1021/cs300036v · Cited by 457
Wang, Z., Xu, D., Xu, J., Zhang, L., & Zhang, X. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200403 · Cited by 427
The discharge rate capability of rechargeable Li–O2 batteries
Lu, Y.-C., Kwabi, D. G., Yao, K. P. C., Harding, J. R., Zhou, J., Zuin, L., & Shao-Horn, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01500a · Cited by 415
Li–O2 Battery with a Dimethylformamide Electrolyte
Chen, Y., Freunberger, S. A., Peng, Z., Bardé, F., & Bruce, P. G. (2012) · Journal of the American Chemical Society · doi:10.1021/ja302178w · Cited by 387
Wang, J., Li, Y., & Sun, X. (2013) · Nano Energy · doi:10.1016/j.nanoen.2012.11.014 · Cited by 350
Enhanced Power and Rechargeability of a Li−O2 Battery Based on a Hierarchical‐Fibril CNT Electrode
Lim, H., Park, K., Song, H., Jang, E. Y., Gwon, H., Kim, J., Kim, Y. H., Lima, M. D., Robles, R. O., Lepró, X., et al. (2013) · Advanced Materials · doi:10.1002/adma.201204018 · Cited by 332
Lithium-air and lithium-sulfur batteries
Bruce, P. G., Hardwick, L. J., & Abraham, K. M. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.157 · Cited by 300
Shui, J.-L., Karan, N. K., Balasubramanian, M., Li, S.-Y., & Liu, D.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3042993 · Cited by 284
Nitrogen-doped carbon nanotubes as cathode for lithium–air batteries
Li, Y., Wang, J., Li, X., Liu, J., Geng, D., Yang, J., Li, R., & Sun, X. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.04.004 · Cited by 278
Advances and challenges in lithium-air batteries
Tan, P., Jiang, H. R., Zhu, X. B., An, L., Jung, C. Y., Wu, M. C., Shi, L., Shyy, W., & Zhao, T. S. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.07.054 · Cited by 266
A Review of the Iron–Air Secondary Battery for Energy Storage
McKerracher, R. D., Ponce de Leon, C., Wills, R. G. A., Shah, A. A., & Walsh, F. C. (2015) · ChemPlusChem · doi:10.1002/cplu.201402238 · Cited by 263
Yang, Y., Shi, M., Zhou, Q.-F., Li, Y.-S., & Fu, Z.-W. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.03.040 · Cited by 75
Metadata
- Authors
- Zhang, G. Q., Zheng, J. P., Liang, R., Zhang, C., Wang, B., Hendrickson, M., & Plichta, E. J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2010
- Volume
- 157
- Issue
- 8
- Pages
- A953
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W1970125014
- Cited by
- 220
- References
- 0
- FWCI
- 17.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.