Heat and Water Transport in Hydrophobic Diffusion Media of PEM Fuel Cells
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Limiting current measurements in small-scale proton exchange membrane (PEM) fuel cells operating at high stoichiometries are used to determine oxygen transport resistance over a wide range of operating conditions, some of which cause water vapor to condense inside the cathode diffusion medium. When water does condense, the cell undergoes a rapid rise in oxygen transport resistance as the current density increases. Graphs of such behavior are useful for comparing the performance of different diffusion medium materials. A one-dimensional analysis of heat and water vapor transport produces a simple condition that determines when, depending on the ratio of thermal conductivity to effective dry diffusion coefficient, the diffusion medium should stay dry with increasing current density and when it should eventually get wet. Limiting current experiments on four different materials over a fairly broad range of temperatures and pressures correlate well with the results of this analysis. The wet/dry criterion derived in this study is also applicable to the related question of whether or not the microporous layer stays dry even when the adjoining diffusion medium is wet.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Khandelwal, M., & Mench, M. M. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.092 · Cited by 359
Cited by
Ott, S., Orfanidi, A., Schmies, H., Anke, B., Nong, H. N., Hübner, J., Gernert, U., Gliech, M., Lerch, M., & Strasser, P. (2020) · Nature Materials · doi:10.1038/s41563-019-0487-0 · Cited by 727
A Critical Review of Modeling Transport Phenomena in Polymer-Electrolyte Fuel Cells
Weber, A. Z., Borup, R. L., Darling, R. M., Das, P. K., Dursch, T. J., Gu, W., Harvey, D., Kusoglu, A., Litster, S., Mench, M. M., et al. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0751412jes · Cited by 598
Review—Electromobility: Batteries or Fuel Cells?
Gröger, O., Gasteiger, H. A., & Suchsland, J.-P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0211514jes · Cited by 529
Yakovlev, Y. V., Lobko, Y. V., Vorokhta, M., Nováková, J., Mazur, M., Matolínová, I., & Matolín, V. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229531 · Cited by 135
Islam, M. N., Shrivastava, U., Atwa, M., Li, X., Birss, V., & Karan, K. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c10755 · Cited by 52
Metadata
- Authors
- Caulk, D. A., & Baker, D. R.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2010
- Volume
- 157
- Issue
- 8
- Pages
- B1237
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2069047200
- Cited by
- 87
- References
- 1
- FWCI
- 1.99
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.