Ionomer distribution control in porous carbon-supported catalyst layers for high-power and low Pt-loaded proton exchange membrane fuel cells
The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Abstract
The reduction of Pt content in the cathode for proton exchange membrane fuel cells is highly desirable to lower their costs. However, lowering the Pt loading of the cathodic electrode leads to high voltage losses. These voltage losses are known to originate from the mass transport resistance of O 2 through the platinum-ionomer interface, the location of the Pt particle with respect to the carbon support and the supports' structures. In this study, we present a new Pt catalyst/support design that substantially reduces local oxygen-related mass transport resistance. The use of chemically modified carbon supports with tailored porosity enabled controlled deposition of Pt nanoparticles on the outer and inner surface of the support particles. This resulted in an unprecedented uniform coverage of the ionomer over the high surface-area carbon supports, especially under dry operating conditions. Consequently, the present catalyst design exhibits previously unachieved fuel cell power densities in addition to high stability under voltage cycling. Thanks to the Coulombic interaction between the ionomer and N groups on the carbon support, homogeneous ionomer distribution and reproducibility during ink manufacturing process is ensured.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Furthermore, the performance of our ALD Pt/NCS85 catalysts approaches that of the best specific and mass activities reported for several conventional ink-based Pt/C catalysts.35,[38][39][40]”
From Scalable nanoporous carbon films allow line-of-sight 3D atomic layer deposition of Pt: towards a new generation catalyst layer for PEM fuel cells. (2021) · cites this paper as [39]
In the citing paper
“In this regard, the Coulombic interaction between the ionomer and N groups on the carbon support helps homogeneous ionomer distribution and improves reproducibility during the ink manufacturing process [187].”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [187]
Citations
Cites
Lai, L., Potts, J. R., Zhan, D., Wang, L., Poh, C. K., Tang, C., Gong, H., Shen, Z., Lin, J., & Ruoff, R. S. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21802j · Cited by 2,277
Characterization of Porous Solids and Powders: Surface Area, Pore Size and Density
Lowell, S., Shields, J. E., Thomas, M. A., & Thommes, M. (2004) · Particle Technology Series · doi:10.1007/978-1-4020-2303-3 · Cited by 1,824
Yang, S., Zhi, L., Tang, K., Feng, X., Maier, J., & Müllen, K. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200186 · Cited by 1,277
Kongkanand, A., & Mathias, M. F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00216 · Cited by 1,202
XPS of nitrogen-containing functional groups on activated carbon
Jansen, R. J. J., & van Bekkum, H. (1995) · Carbon · doi:10.1016/0008-6223(95)00030-h · Cited by 867
Boosting Fuel Cell Performance with Accessible Carbon Mesopores
Yarlagadda, V., Carpenter, M. K., Moylan, T. E., Kukreja, R. S., Koestner, R., Gu, W., Thompson, L., & Kongkanand, A. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00186 · Cited by 686
Investigations of a complete pore structure analysis
Mikhail, R. S., Brunauer, S., & Bodor, E. E. (1968) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(68)90270-1 · Cited by 680
Zhou, Y., Neyerlin, K., Olson, T. S., Pylypenko, S., Bult, J., Dinh, H. N., Gennett, T., Shao, Z., & O'Hayre, R. (2010) · Energy & Environmental Science · doi:10.1039/c003710a · Cited by 644
Measurement of Oxygen Transport Resistance in PEM Fuel Cells by Limiting Current Methods
Baker, D. R., Caulk, D. A., Neyerlin, K. C., & Murphy, M. W. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3152226 · Cited by 510
Determination of Catalyst Unique Parameters for the Oxygen Reduction Reaction in a PEMFC
Neyerlin, K. C., Gu, W., Jorne, J., & Gasteiger, H. A. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2266294 · Cited by 426
Cited by
Designing the next generation of proton-exchange membrane fuel cells
Jiao, K., Xuan, J., Du, Q., Bao, Z., Xie, B., Wang, B., Zhao, Y., Fan, L., Wang, H., Hou, Z., et al. (2021) · Nature · doi:10.1038/s41586-021-03482-7 · Cited by 2,947
Sulfur-anchoring synthesis of platinum intermetallic nanoparticle catalysts for fuel cells
Yang, C.-L., Wang, L.-N., Yin, P., Liu, J., Chen, M.-X., Yan, Q.-Q., Wang, Z.-S., Xu, S.-L., Chu, S.-Q., Cui, C., et al. (2021) · Science · doi:10.1126/science.abj9980 · Cited by 908
Kodama, K., Nagai, T., Kuwaki, A., Jinnouchi, R., & Morimoto, Y. (2021) · Nature Nanotechnology · doi:10.1038/s41565-020-00824-w · Cited by 894
PEM Fuel cell and electrolysis cell technologies and hydrogen infrastructure development – a review
Wang, Y., Pang, Y., Xu, H., Martinez, A., & Chen, K. S. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00790h · Cited by 828
(2020) · doi:10.1038/s41929-020-00545-2 · Cited by 741
Metadata
- Authors
- Ott, S., Orfanidi, A., Schmies, H., Anke, B., Nong, H. N., Hübner, J., Gernert, U., Gliech, M., Lerch, M., & Strasser, P.
- Affiliations
- Technische Universität Berlin (DE)
- BMW (Germany) (DE)
- Max Planck Institute for Chemical Energy Conversion (DE)
- Corresponding author
- Orfanidi, Alin
- Strasser, Peter
- ORCID
- Venue
- Nature Materials
- Published
- 2019-09-30
- Volume
- 19
- Issue
- 1
- Pages
- 77-85
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2976427406
- Cited by
- 727
- References
- 33
- Citations by year
- 2026: 84 · 2025: 141 · 2024: 116 · 2023: 116 · 2022: 116 · 2021: 103 · 2020: 49 · 2019: 2
- FWCI
- 24.24
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- MPG.PuRe (Max Planck Society) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, low Pt loading, cathode catalyst layer, ionomer distribution, porous carbon support, platinum nanoparticles, fuel cell power density, electrostatic interactions
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ionomer distribution control in porous carbon-supported catalyst layers for high-power and low Pt-loaded proton exchange membrane fuel cells. https://app.cochat.ai/papers/10.1038/s41563-019-0487-0
- The paper
- Ott, S., Orfanidi, A., Schmies, H., Anke, B., Nong, H. N., Hübner, J., Gernert, U., Gliech, M., Lerch, M., & Strasser, P. (2020). Ionomer distribution control in porous carbon-supported catalyst layers for high-power and low Pt-loaded proton exchange membrane fuel cells. Nature Materials. https://doi.org/10.1038/s41563-019-0487-0
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.