The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Pore Scale Simulation of Transport and Electrochemical Reactions in Reconstructed PEMFC Catalyst Layers
Abstract
A mesoscale simulation is developed to simulate transport and electrochemistry in a small section of a proton exchange membrane fuel cell (PEMFC) cathode catalyst layer. Oxygen, proton, and electron transport are considered in the model. Many simulations are run with a wide variety of different parameters on stochastically reconstructed microstructures with a resolution of 2 nm. Knudsen diffusion plays an important role in limiting the transport of oxygen through the catalyst layer. Using larger carbon spheres in the catalyst layer increases the effective diffusivity of oxygen through the catalyst layer. The effective proton conductivity increases when larger spheres are used, a normal distribution of spheres is used, or a higher overlap tolerance is used. Increasing the overlap tolerance or overlap probability results in an increase in the effective electron conductivity. When electrochemical reactions are considered in a part of the catalyst layer that is close to the gas diffusion layer, the critical parameter that determines oxygen consumption is the carbon sphere radius. Oxygen consumption at a given carbon volume fraction is larger in microstructures containing spheres with smaller radii, because there is more surface area available for electrochemical reactions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bruggeman, D. A. G. (1935) · Annalen der Physik · doi:10.1002/andp.19354160705 · Cited by 8,645
Polymer Electrolyte Fuel Cell Model
Springer, T. E., Zawodzinski, T. A., & Gottesfeld, S. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085971 · Cited by 3,528
On gaseous self-diffusion in long capillary tubes
Pollard, W. G., & Present, R. D. (1948) · Physical Review · doi:10.1103/physrev.73.762 · Cited by 542
Cited by
One-step electrosynthesis of ethylene and ethanol from CO2 in an alkaline electrolyzer
Ma, S., Sadakiyo, M., Luo, R., Heima, M., Yamauchi, M., & Kenis, P. J. A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.124 · Cited by 488
Pore-scale modeling of complex transport phenomena in porous media
Chen, L., He, A., Zhao, J., Kang, Q., Li, Z.-Y., Carmeliet, J., Shikazono, N., & Tao, W.-Q. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100968 · Cited by 399
Wang, Y., Wang, S., Liu, S., Li, H., & Zhu, K. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.06.120 · Cited by 62
Hasanpour, S., Rashidi, A., Walsh, T., Pagan, E., Milani, A. S., Akbari, M., & Djilali, N. (2021) · ACS Omega · doi:10.1021/acsomega.0c06309 · Cited by 17
Self-citation
Metadata
- Authors
- Lange, K. J., Sui, P.-C., & Djilali, N.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2010
- Volume
- 157
- Issue
- 10
- Pages
- B1434
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2088847339
- Cited by
- 214
- References
- 3
- FWCI
- 4.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.