Kinetic Monte Carlo Simulation of Surface Heterogeneity in Graphite Anodes for Lithium-Ion Batteries: Passive Layer Formation
Open accessThe DOI matches its Crossref record.
Abstract
The properties and chemical composition of the solid-electrolyte-interface (SEI) layer have been a subject of intense research due to their importance in the safety, capacity fade, and cycle life of Li-ion secondary batteries. In this paper, Kinetic Monte Carlo (KMC) simulation is applied to explore the formation of the passive SEI layer in the tangential direction of the lithium-ion intercalation in a graphite anode. The simulations are consistent with experimental observations that the active surface coverage decreases with time slowly in the initial stages of the battery operation, and then decreases rapidly. The effects of operating parameters such as the exchange current density, charging voltage, and temperature on the formation of the passive SEI layer are investigated. The active surface coverage at the end of each charging cycle remained constant for more cycles at higher temperature, but was lower at later cycles. The temperature that optimizes the active surface in a lithium-ion battery at cycle 1 can result in much lower active surface for most of the battery life. The potential for coupling the KMC model with porous electrode theory-continuum models is discussed to arrive at a multiscale model for understanding, analyzing, and minimizing capacity fade.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on lithium-ion battery ageing mechanisms and estimations for automotive applications
Barré, A., Deguilhem, B., Grolleau, S., Gérard, M., Suard, F., & Riu, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.040 · Cited by 1,758
Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries
Wang, A., Kadam, S., Li, H., Shi, S., & Qi, Y. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0064-0 · Cited by 1,639
Hu, X., Xu, L., Lin, X., & Pecht, M. (2020) · Joule · doi:10.1016/j.joule.2019.11.018 · Cited by 1,320
Asenbauer, J., Eisenmann, T., Kuenzel, M., Kazzazi, A., Chen, Z., & Bresser, D. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00175a · Cited by 1,295
Hausbrand, R., Cherkashinin, G., Ehrenberg, H., Gröting, M., Albe, K., Hess, C., & Jaegermann, W. (2015) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2014.11.014 · Cited by 478
Lv, C., Zhou, X., Zhong, L., Yan, C., Srinivasan, M., Seh, Z. W., Liu, C., Pan, H., Li, S., Wen, Y., et al. (2022) · Advanced Materials · doi:10.1002/adma.202101474 · Cited by 412
Boosting Rechargeable Batteries R&D by Multiscale Modeling: Myth or Reality?
Franco, A. A., Rucci, A., Brandell, D., Frayret, C., Gaberscek, M., Jankowski, P., & Johansson, P. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00239 · Cited by 308
Rechargeable Alkali-Ion Battery Materials: Theory and Computation
Van der Ven, A., Deng, Z., Banerjee, S., & Ong, S. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00601 · Cited by 264
Franco, A. A. (2013) · RSC Advances · doi:10.1039/c3ra23502e · Cited by 262
Review—Dynamic Models of Li-Ion Batteries for Diagnosis and Operation: A Review and Perspective
Krewer, U., Röder, F., Harinath, E., Braatz, R. D., Bedürftig, B., & Findeisen, R. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1061814jes · Cited by 242
Self-citationSchomburg, F., Heidrich, B., Wennemar, S., Drees, R., Roth, T., Kurrat, M., Heimes, H., Jossen, A., Winter, M., Cheong, J. Y., et al. (2024) · Energy & Environmental Science · doi:10.1039/d3ee03559j · Cited by 193
Lithium Ion Battery Models and Parameter Identification Techniques
Barcellona, S., & Piegari, L. (2017) · Energies · doi:10.3390/en10122007 · Cited by 149
Metadata
- Authors
- Methekar, R. N., Northrop, P. W. C., Chen, K., Braatz, R. D., & Subramanian, V. R.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2011
- Volume
- 158
- Issue
- 4
- Pages
- A363
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2017221396
- Cited by
- 121
- References
- 0
- FWCI
- 4.46
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.