Relative Humidity Dependence of Pt Utilization in Polymer Electrolyte Fuel Cell Electrodes: Effects of Electrode Thickness, Ionomer-to-Carbon Ratio, Ionomer Equivalent Weight, and Carbon Support
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Pt utilization, i.e., the ratio of the electrochemically active Pt surface area of an MEA to the total Pt surface area of the catalyst, was analyzed at 20–100% RH, and 40–80°C by a newly developed technique using CO as a probe. The Pt utilization significantly decreased with the decreasing relative humidity (RH) for a Pt/C catalyst in which the Pt particles are supported not only on the outer surface, but also within the pores of the carbon particles, while it remained high even at a low RH for the samples with Pt particles supported only on the outer surface of the carbon particles. We presume that this is because the Pt particles within the pores are not in contact with the ionomer therefore, the protons cannot access them at a low RH.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gasteiger, H. A., Kocha, S. S., Sompalli, B., & Wagner, F. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.021 · Cited by 4,876
Characterization of High‐Surface‐Area Electrocatalysts Using a Rotating Disk Electrode Configuration
Schmidt, T. J., Gasteiger, H. A., Stäb, G. D., Urban, P. M., Kolb, D. M., & Behm, R. J. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838642 · Cited by 1,131
Cited by
Boosting Fuel Cell Performance with Accessible Carbon Mesopores
Yarlagadda, V., Carpenter, M. K., Moylan, T. E., Kukreja, R. S., Koestner, R., Gu, W., Thompson, L., & Kongkanand, A. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00186 · Cited by 686
Review—Electromobility: Batteries or Fuel Cells?
Gröger, O., Gasteiger, H. A., & Suchsland, J.-P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0211514jes · Cited by 529
Shinozaki, K., Zack, J. W., Richards, R. M., Pivovar, B. S., & Kocha, S. S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1071509jes · Cited by 353
Self-citationShinozaki, K., Zack, J. W., Pylypenko, S., Pivovar, B. S., & Kocha, S. S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0551512jes · Cited by 254
Self-citationChoi, J.-Y., Yang, L., Kishimoto, T., Fu, X., Ye, S., Chen, Z., & Banham, D. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03005j · Cited by 162
Metadata
- Authors
- Shinozaki, K., Yamada, H., & Morimoto, Y.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2011
- Volume
- 158
- Issue
- 5
- Pages
- B467
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W1985716001
- Cited by
- 144
- References
- 2
- FWCI
- 2.45
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.