Hydrogen Production with a Simple and Scalable Membraneless Electrolyzer
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Ion-conducting membranes are essential components in many electrochemical devices, but they often add substantial cost, limit performance, and are susceptible to degradation. This work investigates membraneless electrochemical flow cells for hydrogen production from water electrolysis that are based on angled mesh flow-through electrodes. These devices can be fabricated with as few as three parts (anode, cathode, and cell body), reflecting their simplicity and potential for low-cost manufacture. 3D printing was used to fabricate prototype electrolyzers that were demonstrated to be electrolyte agnostic, modular, and capable of operating with minimal product crossover. Prototype electrolyzers operating in acidic and alkaline solutions achieved electrolysis efficiencies of 61.9% and 72.5%, respectively, (based on the higher heating value of H 2 ) when operated at 100 mA cm −2 . Product crossover was investigated using in situ electrochemical sensors, in situ imaging, and by gas chromatography (GC). GC analysis found that 2.8% of the H 2 crossed over from the cathode to the anode stream under electrolysis at 100 mA cm −2 and fluid velocity of 26.5 cm s −1 . Additionally, modularity was demonstrated with a three-cell stack, and high-speed video measurements tracking bubble evolution from electrode surfaces provide valuable insight for the further optimization of electrolyzer design and performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
McCrory, C. C. L., Jung, S., Ferrer, I. M., Chatman, S. M., Peters, J. C., & Jaramillo, T. F. (2015) · Journal of the American Chemical Society · doi:10.1021/ja510442p · Cited by 4,145
Hosseini, S. E., & Wahid, M. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.112 · Cited by 2,567
Hydrogen evolution by a metal-free electrocatalyst
Zheng, Y., Jiao, Y., Zhu, Y., Li, L. H., Han, Y., Chen, Y., Du, A., Jaroniec, M., & Qiao, S. Z. (2014) · Nature Communications · doi:10.1038/ncomms4783 · Cited by 2,236
A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies
Wu, J., Yuan, X. Z., Martin, J. J., Wang, H., Zhang, J., Shen, J., Wu, S., & Merida, W. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.06.006 · Cited by 1,587
Hydrogen or batteries for grid storage? A net energy analysis
Pellow, M. A., Emmott, C. J. M., Barnhart, C. J., & Benson, S. M. (2015) · Energy & Environmental Science · doi:10.1039/c4ee04041d · Cited by 450
Cited by
Chatenet, M., Pollet, B. G., Dekel, D. R., Dionigi, F., Deseure, J., Millet, P., Braatz, R. D., Bazant, M. Z., Eikerling, M., Staffell, I., et al. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01079k · Cited by 2,025
Influence of Bubbles on the Energy Conversion Efficiency of Electrochemical Reactors
Angulo, A., van der Linde, P., Gardeniers, H., Modestino, M., & Fernández Rivas, D. (2020) · Joule · doi:10.1016/j.joule.2020.01.005 · Cited by 958
Water electrolysers with closed and open electrochemical systems
Lagadec, M. F., & Grimaud, A. (2020) · Nature Materials · doi:10.1038/s41563-020-0788-3 · Cited by 749
Precious Metal Free Hydrogen Evolution Catalyst Design and Application
Feidenhans’l, A. A., Regmi, Y. N., Wei, C., Xia, D., Kibsgaard, J., & King, L. A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00712 · Cited by 499
Water Electrolysis toward Elevated Temperature: Advances, Challenges and Frontiers
Zhang, W., Liu, M., Gu, X., Shi, Y., Deng, Z., & Cai, N. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00573 · Cited by 441
Metadata
- Authors
- O'Neil, G. D., Christian, C. D., Brown, D. E., & Esposito, D. V.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2016
- Volume
- 163
- Issue
- 11
- Pages
- F3012-F3019
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2336649281
- Cited by
- 112
- References
- 5
- FWCI
- 3.20
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.