The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
LIONSIMBA: A Matlab Framework Based on a Finite Volume Model Suitable for Li-Ion Battery Design, Simulation, and Control
Open accessAbstract
Consumer electronics, wearable and personal health devices, power networks, microgrids, and hybrid electric vehicles (HEVs) are some of the many applications of lithium-ion batteries. Their optimal design and management are important for safe and profitable operations. The use of accurate mathematical models can help in achieving the best performance. This article provides a detailed description of a finite volume method (FVM) for a pseudo-two-dimensional (P2D) Li-ion battery model suitable for the development of model-based advanced battery management systems. The objectives of this work are to provide: ( i ) a detailed description of the model formulation, ( ii ) a parametrizable Matlab framework for battery design, simulation, and control of Li-ion cells or battery packs, ( iii ) a validation of the proposed numerical implementation with respect to the COMSOL MultiPhysics commercial software and the Newman's DUALFOIL code, and ( iv ) some demonstrative simulations involving thermal dynamics, a hybrid charge-discharge cycle emulating the throttle of an HEV, a model predictive control of state of charge, and a battery pack simulation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Numerical Heat Transfer and Fluid Flow
Patankar, S. V. (2018) · CRC Press eBooks · doi:10.1201/9781482234213 · Cited by 23,360
Finite Volume Methods for Hyperbolic Problems
LeVeque, R. J. (2002) · Cambridge University Press eBooks · doi:10.1017/cbo9780511791253 · Cited by 6,313
Introduction to Numerical Analysis.
Froberg, C.-E., Stoer, J., & Bulirsch, R. (1981) · Mathematics of Computation · doi:10.2307/2007454 · Cited by 5,463
SUNDIALS: Suite of nonlinear and differential/algebraic equation solvers
Hindmarsh, A. C., Brown, P. N., Grant, K. E., Lee, S. L., Serban, R., Shumaker, D. E., & Woodward, C. S. (2005) · ACM Transactions on Mathematical Software · doi:10.1145/1089014.1089020 · Cited by 2,556
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
A comparative study of equivalent circuit models for Li-ion batteries
Hu, X., Li, S., & Peng, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.013 · Cited by 2,179
A review of the electrochemical performance of alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.020 · Cited by 2,140
He, H., Xiong, R., & Fan, J. (2011) · Energies · doi:10.3390/en4040582 · Cited by 1,180
Transport Properties of LiPF[sub 6]-Based Li-Ion Battery Electrolytes
Valo̸en, L. O., & Reimers, J. N. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1872737 · Cited by 935
Review of models for predicting the cycling performance of lithium ion batteries
Santhanagopalan, S., Guo, Q., Ramadass, P., & White, R. E. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.05.070 · Cited by 806
Modeling and Simulation of Lithium-Ion Batteries from a Systems Engineering Perspective
Northrop, P. W. C., De, S., Braatz, R. D., Ramadesigan, V., Northrop, P. W. C., Santhanagopalan, S., & Subramaniana, V. R. (2011) · Cited by 748
Self-citationFinite volume method for radiation heat transfer
Chai, J. C., Lee, H. S., & Patankar, S. V. (1994) · Journal of Thermophysics and Heat Transfer · doi:10.2514/3.559 · Cited by 587
Chiang, Y.-H., Sean, W.-Y., & Ke, J.-C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.005 · Cited by 393
Remmlinger, J., Buchholz, M., Meiler, M., Bernreuter, P., & Dietmayer, K. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.08.035 · Cited by 392
A Review of Cell Equalization Methods for Lithium Ion and Lithium Polymer Battery Systems
Moore, S. W., & Schneider, P. J. (2001) · SAE Technical Paper Series · doi:10.4271/2001-01-0959 · Cited by 392
Thermal Model for a Li-Ion Cell
Kumaresan, K., Sikha, G., & White, R. E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2817888 · Cited by 382
Efficient Macro-Micro Scale Coupled Modeling of Batteries
Subramanian, V. R., Diwakar, V. D., & Tapriyal, D. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.2032427 · Cited by 381
Cai, L., & White, R. E. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.017 · Cited by 377
Smith, K., & Wang, C.-Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.050 · Cited by 373
Micro‐Macroscopic Coupled Modeling of Batteries and Fuel Cells: I. Model Development
Wang, C. Y., Gu, W. B., & Liaw, B. Y. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838820 · Cited by 363
Heat‐Generation Rate and General Energy Balance for Insertion Battery Systems
Rao, L., & Newman, J. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837884 · Cited by 333
Modeling of lithium ion cells?A simple equivalent-circuit model approach
YANNLIAW, B. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.09.049 · Cited by 319
SUBAT: An assessment of sustainable battery technology
Van den Bossche, P., Vergels, F., Van Mierlo, J., Matheys, J., & Van Autenboer, W. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.07.039 · Cited by 285
Handbook of batteries and fuel cells
Linden, D. (1984) · Medical Entomology and Zoology · Cited by 260
Northrop, P. W. C., Ramadesigan, V., De, S., & Subramanian, V. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.058112jes · Cited by 197
State of health estimation for lithium ion batteries based on charging curves
Guo, Z., Qiu, X., Hou, G., Liaw, B. Y., & Zhang, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.114 · Cited by 182
Temperature-Dependent Battery Models for High-Power Lithium-Ion Batteries
Johnson, V. H., Pesaran, A., & Sack, T. (2001) · University of North Texas Digital Library (University of North Texas) · Cited by 150
Efficient Reformulation of Solid-Phase Diffusion in Physics-Based Lithium-Ion Battery Models
Ramadesigan, V., Boovaragavan, V., Pirkle, J. C., & Subramanian, V. R. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3425622 · Cited by 149
Analysis of pulse and relaxation behavior in lithium-ion batteries
Bernardi, D. M., & Go, J. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.107 · Cited by 130
Cell balancing considerations for lithium-ion battery systems
Bentley, W. F. (2002) · doi:10.1109/bcaa.1997.574107 · Cited by 118
Comparison of single particle and equivalent circuit analog models for a lithium-ion cell
Rahimian, S. K., Rayman, S. C., & White, R. E. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.007 · Cited by 106
Nickel/metal hydride technology for consumer and electric vehicle batteries—a review and up-date
Dhar, S. K., Ovshinsky, S. R., Gifford, P. R., CORRIGAN, D. A., Fetcenko, M. A., & Venkatesan, S. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02599-2 · Cited by 91
Real-time model predictive control for the optimal charging of a lithium-ion battery
Torchio, M., Wolff, N., Raimondo, D. M., Magni, L., Krewer, U., Gopaluni, R. B., Paulson, J. A., & Braatz, R. D. (2015) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2015.7172043 · Cited by 80
Self-citationThe Finite Volume-Complete Flux Scheme for Advection-Diffusion-Reaction Equations
Boonkkamp, J. H. M. T. T., & Anthonissen, M. (2010) · Journal of Scientific Computing · doi:10.1007/s10915-010-9388-8 · Cited by 77
Zhang, Q., & White, R. E. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.12.056 · Cited by 67
An analytical solution to Li/Li+ insertion into a porous electrode
LIU, S. (2005) · Solid State Ionics · doi:10.1016/j.ssi.2005.09.053 · Cited by 57
State of Charge Estimation in Li-ion Batteries Using an Isothermal Pseudo Two-Dimensional Model
Gopaluni, R. B., & Braatz, R. D. (2013) · IFAC Proceedings Volumes · doi:10.3182/20131218-3-in-2045.00163 · Cited by 15
Self-citation
Cited by
Origin of fast charging in hard carbon anodes
Li, Y., Vasileiadis, A., Zhou, Q., Lu, Y., Meng, Q., Li, Y., Ombrini, P., Zhao, J., Chen, Z., Niu, Y., et al. (2024) · Nature Energy · doi:10.1038/s41560-023-01414-5 · Cited by 490
Python battery mathematical modelling (PyBaMM)
Sulzer, V., Marquis, S. G., Timms, R., Robinson, M., & Chapman, S. J. (2021) · Journal of Open Research Software · doi:10.5334/jors.309 · Cited by 477
Wu, B., Widanage, W. D., Yang, S., & Liu, X. (2020) · Energy and AI · doi:10.1016/j.egyai.2020.100016 · Cited by 396
Perspective—Combining Physics and Machine Learning to Predict Battery Lifetime
Aykol, M., Gopal, C. B., Anapolsky, A., Herring, P. K., van Vlijmen, B., Berliner, M. D., Bazant, M. Z., Braatz, R. D., Chueh, W. C., & Storey, B. D. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abec55 · Cited by 264
Self-citationBattery Safety: Machine Learning-Based Prognostics
Zhao, J., Feng, X., Pang, Q., Fowler, M., Lian, Y., Ouyang, M., & Burke, A. F. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101142 · Cited by 216
Metadata
- Authors
- Torchio, M., Magni, L., Gopaluni, R. B., Braatz, R. D., & Raimondo, D. M.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2016
- Volume
- 163
- Issue
- 7
- Pages
- A1192-A1205
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2337221380
- Cited by
- 300
- References
- 38
- FWCI
- 11.11
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.