Impact of Compressive Stress on MEA Pore Structure and Its Consequence on PEMFC Performance
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
One of the most important factors in the assembly of polymer electrolyte membrane fuel cells (PEMFCs) is to set the appropriate normal compressive stress to the cell to balance the conflicting demands of mitigating gas leaks and decreasing contact resistance without damaging the porous components so that optimal performance is obtained. Herein we systematically evaluate the influence of compressive stress (0 to 1.4 MPa) on membrane electrode assemblies (MEAs) composed of spray-coated catalyst layers (CLs) and gas diffusion media (GDM) containing both a gas diffusion layer (GDL) and a microporous layer (MPL) by changing the gasket thickness. The CL structure is unaltered at the levels of compressive stress evaluated in this study, as confirmed by postmortem scanning electron microscopy and electrochemical evaluation. However, the pore structure of the MPL of the GDM is significantly altered at compressive stresses ≥0.96 MPa, resulting in a loss of up to 95% of the cumulative pore volume in the MPL. This collapse of the MPL structure results in up to a 19% decrease in current density in the mass transport region of the polarization curve. Oxygen gain voltage analysis confirms that the mass transport limitation occurs in the GDM. We conclude that compressive stress must be optimized around the MPL and that cross-sectional SEM is an effective tool for observing changes in the overall porosity in MEA components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of compression on liquid water transport and microstructure of PEMFC gas diffusion layers
Bazylak, A., Sinton, D., Liu, Z.-S., & Djilali, N. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.045 · Cited by 323
Morgan, J. M., & Datta, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.090 · Cited by 154
Cited by
Sassin, M. B., Garsany, Y., Gould, B. D., & Swider-Lyons, K. E. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b03005 · Cited by 143
Self-citationVan Cleve, T., Wang, G., Mooney, M., Cetinbas, C. F., Kariuki, N., Park, J., Farghaly, A., Myers, D., & Neyerlin, K. C. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228889 · Cited by 66
Talukdar, K., Ripan, M. A., Jahnke, T., Gazdzicki, P., Morawietz, T., & Friedrich, K. A. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228169 · Cited by 45
Gomes Bezerra, C. A., Deiner, L. J., & Tremiliosi-Filho, G. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900703 · Cited by 43
Dual-layer catalyst layers for increased proton exchange membrane fuel cell performance
Garsany, Y., Atkinson, R. W., Gould, B. D., Martin, R., Dubau, L., Chatenet, M., & Swider-Lyons, K. E. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230574 · Cited by 43
Self-citation
Metadata
- Authors
- Sassin, M. B., Garsany, Y., Gould, B. D., & Swider-Lyons, K.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2016
- Volume
- 163
- Issue
- 8
- Pages
- F808-F815
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2402342089
- Cited by
- 60
- References
- 2
- FWCI
- 3.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.