The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: I. Determination of Parameters
Open accessAbstract
The parameterization of a physico-chemical model constitutes a critical part in model development. Conclusions about the internal state of a battery can only be drawn if a correct set of material parameters is provided for the material combination under consideration. In this work, parameters to fully parameterize a physico-chemical model for a 7.5 Ah cell produced by Kokam are determined and are compared with existing literature values. The paper presents parameter values and procedures to determine the parameters. Cells were opened under argon atmosphere and the geometrical data were measured. Hg-porosimetry was conducted to determine porosity, particle radius as well as tortuosity of the electrodes and the separator. Conductivity and diffusion constants of the electrolyte as well as the electronic conductivity of the active material were measured detecting the voltage response to a dc current. Finally, electrochemical measurements were conducted on laboratory-made coin cells in order to determine open circuit voltage curves, diffusion coefficients and charge transfer kinetics of the electrodes as well as their balancing. In part II of this paper, a physico-chemical model is introduced and a validation of the measured parameter set is given by comparing model results with experiments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Impedance Spectroscopy: Theory, Experiment, and Applications
(2005) · Wiley eBooks · doi:10.1002/0471716243 · Cited by 5,322
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Simulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Weppner, W., & Huggins, R. A. (1977) · Journal of The Electrochemical Society · doi:10.1149/1.2133112 · Cited by 1,980
A review of conduction phenomena in Li-ion batteries
Park, M., Zhang, X., Chung, M., Less, G. B., & Sastry, A. M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.060 · Cited by 1,627
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Doyle, M., Newman, J., Gozdz, A. S., Schmutz, C. N., & Tarascon, J. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836921 · Cited by 1,569
Porous‐electrode theory with battery applications
Newman, J., & Tiedemann, W. (1975) · AIChE Journal · doi:10.1002/aic.690210103 · Cited by 1,255
Advances in Lithium-Ion Batteries
(2002) · Springer eBooks · doi:10.1007/b113788 · Cited by 1,041
Transport Properties of LiPF[sub 6]-Based Li-Ion Battery Electrolytes
Valo̸en, L. O., & Reimers, J. N. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1872737 · Cited by 935
Levi, M. D., Salitra, G., Markovsky, B., Teller, H., Aurbach, D., Heider, U., & Heider, L. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391759 · Cited by 644
Cited by
Revealing the Intercalation Mechanisms of Lithium, Sodium, and Potassium in Hard Carbon
Alvin, S., Cahyadi, H. S., Hwang, J., Chang, W., Kwak, S. K., & Kim, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000283 · Cited by 452
Wu, B., Widanage, W. D., Yang, S., & Liu, X. (2020) · Energy and AI · doi:10.1016/j.egyai.2020.100016 · Cited by 396
Nickol, A., Schied, T., Heubner, C., Schneider, M., Michaelis, A., Bobeth, M., & Cuniberti, G. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9404 · Cited by 281
Metadata
- Authors
- Ecker, M., Tran, T. K. D., Dechent, P., Käbitz, S., Warnecke, A., & Sauer, D. U.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2015
- Volume
- 162
- Issue
- 9
- Pages
- A1836-A1848
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W1819956133
- Cited by
- 298
- References
- 30
- FWCI
- 7.85
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: I. Determination of Parameters. https://app.cochat.ai/papers/10.1149/2.0551509jes
- The paper
- Ecker, M., Tran, T. K. D., Dechent, P., Käbitz, S., Warnecke, A., & Sauer, D. U. (2015). Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: I. Determination of Parameters. Journal of The Electrochemical Society. https://doi.org/10.1149/2.0551509jes
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
