Delta Differential Capacity Analysis
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Even the best lithium-ion cells degrade slightly from one charge-discharge cycle to the next. This degradation, and its origin, can be studied using “delta differential capacity analysis”. Constant-current chronopoteniometry is used to collect voltage (V) versus charge (Q), data as cells are charged and discharged during cycles n, n + 1, n + 2, etc. as V(Q, n) This data is then differentiated, using finite differences, to create differential capacity, dQ/dV(V, n), versus V for the nth measured cycle. “Delta dQ/dV” is calculated as the difference between the differential capacities of the nth and mth cycles, i.e. ΔdQ/dV(V, n, m) = dQ/dV(V, n) – dQ/dV(V, m). Three different battery testers were used to measure ΔdQ/dV(V, n, m) for LiCoO2/graphite commercial Li-ion cells where n and m differed only by a few cycles (2 < n – m < 20). When precision test equipment was used, noise-free ΔdQ/dV(V, n, m) was measured, even when adjacent cycles were used for the calculation (i.e. n − m = 1) and even when very stable cell chemistries were studied. Unfortunately, typical battery test equipment, availably commercially, cannot make such measurements, even when n – m > 20. The best Li-ion cell, that does not degrade from cycle to cycle should have ΔdQ/dV(V, n, mo) = 0 for all V and n, where mo is the number of formation cycles required for a particular cell chemistry. Thus, monitoring ΔdQ/dV(V, n, mo) over just a few cycles can be used as a quality assurance tool for Li-ion cells destined for long lifetime applications, such as in electric vehicles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Identify capacity fading mechanism in a commercial LiFePO4 cell
Dubarry, M., & Liaw, B. Y. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.05.036 · Cited by 675
Dubarry, M., Svoboda, V., Hwu, R., & Yann Liaw, B. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2221767 · Cited by 427
Identifying battery aging mechanisms in large format Li ion cells
Dubarry, M., Liaw, B. Y., Chen, M.-S., Chyan, S.-S., Han, K.-C., Sie, W.-T., & Wu, S.-H. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.029 · Cited by 417
Cited by
Weng, C., Sun, J., & Peng, H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.026 · Cited by 375
Weng, C., Feng, X., Sun, J., & Peng, H. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.126 · Cited by 324
A comparison of methodologies for the non-invasive characterisation of commercial Li-ion cells
Barai, A., Uddin, K., Dubarry, M., Somerville, L., McGordon, A., Jennings, P., & Bloom, I. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.01.001 · Cited by 319
Performance comparison of four lithium–ion battery technologies under calendar aging
Eddahech, A., Briat, O., & Vinassa, J.-M. (2015) · Energy · doi:10.1016/j.energy.2015.03.019 · Cited by 171
Differential thermal voltammetry for tracking of degradation in lithium-ion batteries
Wu, B., Yufit, V., Merla, Y., Martinez-Botas, R. F., Brandon, N. P., & Offer, G. J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.127 · Cited by 151
Abuse tolerance behavior of layered oxide-based Li-ion battery during overcharge and over-discharge
Qian, K., Li, Y., He, Y.-B., Liu, D., Zheng, Y., Luo, D., Li, B., & Kang, F. (2016) · RSC Advances · doi:10.1039/c6ra11288a · Cited by 106
Bilfinger, P., Rosner, P., Schreiber, M., Kröger, T., Gamra, K. A., Ank, M., Wassiliadis, N., Dietermann, B., & Lienkamp, M. (2024) · eTransportation · doi:10.1016/j.etran.2024.100356 · Cited by 49
Metadata
- Authors
- Smith, A. J., & Dahn, J. R.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2012
- Volume
- 159
- Issue
- 3
- Pages
- A290-A293
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2112778554
- Cited by
- 89
- References
- 3
- FWCI
- 4.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.