Systematic Study on the Impact of Pt Particle Size and Operating Conditions on PEMFC Cathode Catalyst Durability
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Electrocatalyst decay protocols were used to accelerate cathode performance loss for Pt catalysts. Four electrodes with average platinum particle sizes of 1.9, 3.2, 7.1 and 12.7 nm were evaluated to elucidate the impact of particle size on initial performance and subsequent decay, when subjected to identical potential cycles. The decay rates of Pt electrochemical surface area (ECA) and mass activity ( i m ) were significantly greater for 1.9 and 3.2 nm Pt-on-carbon catalysts (Pt-C) compared to 7.1 nm Pt-C, which was stable for 10,000 potential cycles. As expected, the performance decay rate of the electrodes with the smallest Pt particle size was the highest and that of the largest Pt particle size was lowest. However, the initial performance of the largest Pt particle size electrode was significantly lower. Thus, a Pt particle size was identified that balanced performance and durability. The relative impact of operational conditions, such as relative humidity, cell temperature and upper potential limit on 3.2 nm Pt electrodes was also evaluated. Highest decay rates were found when the cathode was subjected to a higher upper potential limit. The decay was attributed to a combination of Pt dissolution, particle growth and carbon support corrosion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shao, M., Peles, A., & Shoemaker, K. (2011) · Nano Letters · doi:10.1021/nl2017459 · Cited by 878
Degradation of Polymer-Electrolyte Membranes in Fuel Cells
Gummalla, M., Atrazhev, V. V., Condit, D., Cipollini, N., Madden, T., Kuzminyh, N. Y., Weiss, D., & Burlatsky, S. F. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3481450 · Cited by 59
Self-citationThe Dynamics of Platinum Precipitation in an Ion Exchange Membrane
Burlatsky, S. F., Gummalla, M., Atrazhev, V. V., Dmitriev, D. V., Kuzminyh, N. Y., & Erikhman, N. S. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3532956 · Cited by 53
Self-citation
Cited by
New roads and challenges for fuel cells in heavy-duty transportation
Cullen, D. A., Neyerlin, K. C., Ahluwalia, R. K., Mukundan, R., More, K. L., Borup, R. L., Weber, A. Z., Myers, D. J., & Kusoglu, A. (2021) · Nature Energy · doi:10.1038/s41560-021-00775-z · Cited by 1,277
Understanding the electrocatalysis of oxygen reduction on platinum and its alloys
Stephens, I. E. L., Bondarenko, A. S., Grønbjerg, U., Rossmeisl, J., & Chorkendorff, I. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03590a · Cited by 1,176
Jadhav, H. S., Bandal, H. A., Ramakrishna, S., & Kim, H. (2022) · Advanced Materials · doi:10.1002/adma.202107072 · Cited by 447
A Comparative Study on Gold and Platinum Dissolution in Acidic and Alkaline Media
Cherevko, S., Zeradjanin, A. R., Keeley, G. P., & Mayrhofer, K. J. J. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0881412jes · Cited by 301
Highly Durable and Active Pt‐Based Nanoscale Design for Fuel‐Cell Oxygen‐Reduction Electrocatalysts
Chung, D. Y., Yoo, J. M., & Sung, Y. (2018) · Advanced Materials · doi:10.1002/adma.201704123 · Cited by 297
Li, D., Wang, C., Strmcnik, D. S., Tripkovic, D. V., Sun, X., Kang, Y., Chi, M., Snyder, J. D., van der Vliet, D., Tsai, Y., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01564a · Cited by 238
Surface engineering for stable electrocatalysis
Do, V.-H., & Lee, J.-M. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00292f · Cited by 167
Particle-size effect of Pt cathode catalysts on durability in fuel cells
Yano, H., Watanabe, M., Iiyama, A., & Uchida, H. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.016 · Cited by 135
Sandbeck, D. J. S., Secher, N. M., Speck, F. D., Sørensen, J. E., Kibsgaard, J., Chorkendorff, I., & Cherevko, S. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c00779 · Cited by 121
Choi, R., Choi, S., Choi, C. H., Nam, K. M., Woo, S. I., Park, J. T., & Han, S. W. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201203834 · Cited by 98
Interstitial B-Doping in Pt Lattice to Upgrade Oxygen Electroreduction Performance
Mao, Z., Ding, C., Liu, X., Zhang, Q., Qin, X., Li, H., Yang, F., Li, Q., Zhang, X.-G., Zhang, J., et al. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c01052 · Cited by 62
Metadata
- Authors
- Yang, Z., Ball, S., Condit, D., & Gummalla, M.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2011
- Volume
- 158
- Issue
- 11
- Pages
- B1439
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2054871472
- Cited by
- 113
- References
- 3
- FWCI
- 4.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.