Impact of Microporous Layer Pore Properties on Liquid Water Transport in PEM Fuel Cells: Carbon Black Type and Perforation
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
The oxygen and water transport through various microporous layers (MPLs) is investigated by fuel cell tests in a 5 cm 2 active area cell under differential-flow conditions, analyzing polarization curves, the associated high-frequency resistance, and the oxygen transport resistance extracted from limiting current density measurements. In this study, MPLs with two different carbon blacks are prepared and compared to a commercial material, all coated on the same GDL-substrate (Freudenberg); furthermore, perforated MPLs with large pores produced by a thermally decomposable polymeric pore former with a particle diameter of ≈30 μm are examined. The materials are characterized by mercury porosimetry, nitrogen adsorption and scanning electron microscopy. While at dry conditions ( T cell = 80°C, RH = 70%, p abs = 170 kPa) the performance of all materials is similar, at conditions of high water saturation ( T cell = 50°C, RH = 120%, p abs = 300 kPa), MPLs with larger pores or perforations exhibit a performance improvement due to a ≈30% reduction in oxygen transport resistance. The results indicate that liquid water is transported exclusively through these large pores, while the oxygen transport occurs in the small pores defined by the carbon black structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bruggeman, D. A. G. (1935) · Annalen der Physik · doi:10.1002/andp.19354160705 · Cited by 8,645
Kongkanand, A., & Mathias, M. F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00216 · Cited by 1,202
Water Transport Mechanisms in PEMFC Gas Diffusion Layers
Owejan, J. P., Owejan, J. E., Gu, W., Trabold, T. A., Tighe, T. W., & Mathias, M. F. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3468615 · Cited by 204
Morgan, J. M., & Datta, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.090 · Cited by 154
Lee, J., Yip, R., Antonacci, P., Ge, N., Kotaka, T., Tabuchi, Y., & Bazylak, A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0221507jes · Cited by 112
Alink, R., Haußmann, J., Markötter, H., Schwager, M., Manke, I., & Gerteisen, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.085 · Cited by 99
Cited by
Fundamentals, materials, and machine learning of polymer electrolyte membrane fuel cell technology
Wang, Y., Seo, B., Wang, B., Zamel, N., Jiao, K., & Adroher, X. C. (2020) · Energy and AI · doi:10.1016/j.egyai.2020.100014 · Cited by 484
Investigating Electrode Flooding in a Flowing Electrolyte, Gas‐Fed Carbon Dioxide Electrolyzer
Leonard, M. E., Clarke, L. E., Forner‐Cuenca, A., Brown, S. M., & Brushett, F. R. (2020) · ChemSusChem · doi:10.1002/cssc.201902547 · Cited by 375
Alkaline membrane fuel cells: anion exchange membranes and fuels
Hren, M., Božič, M., Fakin, D., Kleinschek, K. S., & Gorgieva, S. (2021) · Sustainable Energy & Fuels · doi:10.1039/d0se01373k · Cited by 315
A review of proton exchange membrane fuel cell water management: Membrane electrode assembly
Liu, Q., Lan, F., Chen, J., Zeng, C., & Wang, J. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230723 · Cited by 200
Nguyen, H., Klose, C., Metzler, L., Vierrath, S., & Breitwieser, M. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103559 · Cited by 133
Metadata
- Authors
- Simon, C., Kartouzian, D., Müller, D., Wilhelm, F., & Gasteiger, H. A.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2017
- Volume
- 164
- Issue
- 14
- Pages
- F1697-F1711
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2777718909
- Cited by
- 124
- References
- 6
- FWCI
- 3.02
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.