Cited by 1,119Structural Health Monitoring TechniquesFatigue and fracture mechanicsDigital Transformation in Industry

The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.

Reengineering Aircraft Structural Life Prediction Using a Digital Twin

Open access

Tuegel, Eric J., Ingraffea, Anthony R., Eason, Thomas G., Spottswood, S. Michael·2011·International Journal of Aerospace Engineering

DOI 10.1155/2011/154798

Open this paper in CoChat — free account Open PDF

Abstract

Reengineering of the aircraft structural life prediction process to fully exploit advances in very high performance digital computing is proposed. The proposed process utilizes an ultrahigh fidelity model of individual aircraft by tail number, a Digital Twin, to integrate computation of structural deflections and temperatures in response to flight conditions, with resulting local damage and material state evolution. A conceptual model of how the Digital Twin can be used for predicting the life of aircraft structure and assuring its structural integrity is presented. The technical challenges to developing and deploying a Digital Twin are discussed in detail.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.1155/2011/154798

Cites

45 of 45 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

The stochastic finite element method: Past, present and future
Stefanou, G. (2008) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2008.11.007 · Cited by 1,006
Partitioned analysis of coupled mechanical systems
Felippa, C. A., Park, K. C., & Farhat, C. (2001) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(00)00391-1 · Cited by 822
Generalized finite element methods for three-dimensional structural mechanics problems
Duarte, C. A., Babuska, I. M., & Oden, J. T. (2000) · Computers & Structures · doi:10.1016/s0045-7949(99)00211-4 · Cited by 652
Studies on Fluid-Thermal-Structural Coupling for Aerothermoelasticity in Hypersonic Flow
Culler, A. J., & McNamara, J. J. (2010) · AIAA Journal · doi:10.2514/1.j050193 · Cited by 250
Analysis and applications of a generalized finite element method with global–local enrichment functions
Duarte, C. A., & Kim, D. J. (2007) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2007.08.017 · Cited by 215
Nonlinear modal models for sonic fatigue response prediction: a comparison of methods
Hollkamp, J. J., Gordon, R. W., & Spottswood, S. M. (2004) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2004.08.036 · Cited by 190
A general theory of finite elements. II. Applications
Oden, J. T. (1969) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620010304 · Cited by 189
SUGGAR: A General Capability for Moving Body Overset Grid Assembly
Noack, R. W. (2005) · AIAA Computational Fluid Dynamics Conference · doi:10.2514/6.2005-5117 · Cited by 167
Some challenges of realistic flow simulations by unstructured grid CFD
Nakahashi, K., Ito, Y., & Togashi, F. (2003) · International Journal for Numerical Methods in Fluids · doi:10.1002/fld.559 · Cited by 154
Research directions in computational mechanics
Oden, J. T., Belytschko, T., Babuska, I. M., & Hughes, T. J. R. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(02)00616-3 · Cited by 153

Show all 45 references

Sorted by citations

Items 201–300 of 999

Development of an edge computing-based cyber-physical machine tool
Zhang, J., Deng, C., Zheng, P., Xu, X. W., & Ma, Z. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.102042 · Cited by 71
Closed-loop digital twin system for air cargo load planning operations
Wong, E. Y. C., Mo, D. Y. W., & So, S. C. K. (2020) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2020.1775299 · Cited by 71
Digital Twin for rolling bearings: A review of current simulation and PHM techniques
Peng, F., Li, Z., Peng, Y., Fang, C., & Meng, X. (2022) · Measurement · doi:10.1016/j.measurement.2022.111728 · Cited by 72
Development of a Framework to Support Whole-Life-Cycle Net-Zero-Carbon Buildings through Integration of Building Information Modelling and Digital Twins
Shen, K., Ding, L., & Wang, C. (2022) · Buildings · doi:10.3390/buildings12101747 · Cited by 69
The Relationship Between Artificial Intelligence (AI) and Building Information Modeling (BIM) Technologies for Sustainable Building in the Context of Smart Cities
Li, J., Liu, Z., Han, G., Demian, P., & Osmani, M. (2024) · Sustainability · doi:10.3390/su162410848 · Cited by 91
Integrating Fiber Optic Strain Sensors into Metal Using Ultrasonic Additive Manufacturing
Hehr, A., Norfolk, M., Wenning, J., Sheridan, J. T., Leser, P., Leser, P. E., & Newman, J. A. (2017) · JOM · doi:10.1007/s11837-017-2709-8 · Cited by 69
A Digital Twin-Driven Life Prediction Method of Lithium-Ion Batteries Based on Adaptive Model Evolution
Yang, D., Cui, Y., Xia, Q., Jiang, F., Ren, Y., Sun, B., Feng, Q., Wang, Z., & Yang, C. Q. (2022) · Materials · doi:10.3390/ma15093331 · Cited by 68
Digital Twin Technology
Wang, Z.-Y. (2020) · Industry 4.0 · doi:10.5772/intechopen.80974 · Cited by 100
Real-Time Prediction of Probabilistic Crack Growth with a Helicopter Component Digital Twin
Zhou, X., He, S., Dong, L., & Atluri, S. N. (2022) · AIAA Journal · doi:10.2514/1.j060890 · Cited by 67
Building a Trustworthy Product-Level Shape-Performance Integrated Digital Twin With Multifidelity Surrogate Model
Wang, S., Lai, X., He, X., Qiu, Y., & Song, X. (2021) · Journal of Mechanical Design · doi:10.1115/1.4052390 · Cited by 65
Digital Twin Models: Functions, Challenges, and Industry Applications
Rayhana, R., Bai, L., Xiao, G. G., Liao, M., & Liu, Z. (2024) · IEEE Journal of Radio Frequency Identification · doi:10.1109/jrfid.2024.3387996 · Cited by 68
Synchronizing physical and digital factory: benefits and technical challenges
Modoni, G. E., Caldarola, E. G., Sacco, M., & Terkaj, W. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.02.125 · Cited by 62
Digital Twins From a Networking Perspective
Vaezi, M., Noroozi, K., Todd, T. D., Zhao, D., Karakostas, G., Wu, H., & Shen, X. (2022) · IEEE Internet of Things Journal · doi:10.1109/jiot.2022.3200327 · Cited by 65
The resurrection of digital triplet: A cognitive pillar of human-machine integration at the dawn of industry 5.0
Alimam, H., Mazzuto, G., Tozzi, N., Ciarapica, F. E., & Bevilacqua, M. (2023) · Journal of King Saud University: Computer and Information Sciences · doi:10.1016/j.jksuci.2023.101846 · Cited by 60
The Modeling and Using Strategy for the Digital Twin in Process Planning
Zhao, P., Liu, J., Jing, X., Tang, M., Sheng, S., Zhou, H., & Liu, X. (2020) · IEEE Access · doi:10.1109/access.2020.2974241 · Cited by 64
Conceiving a Digital Twin for a Flexible Manufacturing System
Magalhães, L., Magalhães, L., Ramos, J. B., Moura, L. R., de Moraes, R. E. N., Gonçalves, J. B., Hisatugu, W. H., Souza, M. T., de Lacalle, L. D., & Ferreira, J. C. (2022) · Applied Sciences · doi:10.3390/app12199864 · Cited by 51
Digital Twin of Space Environment: Development, Challenges, Applications, and Future Outlook
Liu, W., Wu, M., Wan, G., & Xu, M. (2024) · Remote Sensing · doi:10.3390/rs16163023 · Cited by 71
Drilling Digital Twin Success Stories the Last 10 Years
Mayani, M. G., Svendsen, M., & Oedegaard, S. I. (2018) · SPE Bergen One Day Seminar · doi:10.2118/191336-ms · Cited by 64
Quantifying the unknown impact of segmentation uncertainty on image-based simulations
Krygier, M., LaBonte, T., Martinez, C., Norris, C., Sharma, K., Collins, L. N., Mukherjee, P. P., & Roberts, S. A. (2021) · Nature Communications · doi:10.1038/s41467-021-25493-8 · Cited by 71
A Framework of Dynamic Data Driven Digital Twin for Complex Engineering Products: the Example of Aircraft Engine Health Management
Wu, Z., & Li, J. (2021) · Procedia Manufacturing · doi:10.1016/j.promfg.2021.10.020 · Cited by 63
Digital Twins for Clinical and Operational Decision-Making: Scoping Review
Riahi, V., Diouf, I., Khanna, S., Boyle, J., & Hassanzadeh, H. (2024) · Journal of Medical Internet Research · doi:10.2196/55015 · Cited by 63
Corrosion informatics: an integrated approach to modelling corrosion
Taylor, C. D. (2015) · Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control · doi:10.1179/1743278215y.0000000012 · Cited by 63
Digital twin-enabled smart industrial systems: a bibliometric review
Ciano, M. P., Pozzi, R., Rossi, T., & Strozzi, F. (2020) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2020.1852600 · Cited by 63
Review of Digital twin for intelligent transportation system
Bao, L., Wang, Q., & Jiang, Y. C. (2021) · International Conference on Information Control, Electrical Engineering and Rail Transit (ICEERT) · doi:10.1109/iceert53919.2021.00064 · Cited by 62
Three-dimensional multi-field digital twin technology for proton exchange membrane fuel cells
Bai, F., Quan, H.-B., Yin, R.-J., Zhang, Z., Jin, S.-Q., He, P., Mu, Y., Gong, X.-M., & Tao, W.-Q. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119763 · Cited by 64
Maintenance optimization for a multi-unit system with digital twin simulation
Savolainen, J., & Urbani, M. (2021) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-021-01740-z · Cited by 56
The Potential of Augmented Reality for Digital Twins: A Literature Review
Künz, A., Rosmann, S., Loria, E., & Pirker, J. (2022) · IEEE Conference on Virtual Reality and 3D User Interfaces · doi:10.1109/vr51125.2022.00058 · Cited by 49
Digital Twin Framework for Enabling Serial Construction
Kosse, S., Vogt, O., Wolf, M., König, M., & Gerhard, D. (2022) · Frontiers in Built Environment · doi:10.3389/fbuil.2022.864722 · Cited by 53
Digital twin and machine learning for decision support in thermal power plant with combustion engines
Deon, B., Cotta, K. P., Silva, R. F. V., Batista, C. B., Justino, G. T., Freitas, G. C., Cordeiro, A. M., Barbosa, A. S., Loução, F. L., Simioni, T., et al. (2022) · Knowledge-Based Systems · doi:10.1016/j.knosys.2022.109578 · Cited by 66
Digital Twin Implementation in Additive Manufacturing: A Comprehensive Review
Amor, S. B., Elloumi, N., Eltaief, A., Louhichi, B., Alrasheedi, N., & Seibi, A. (2024) · Processes · doi:10.3390/pr12061062 · Cited by 62
A Conceptual Framework for Digital Twin in Healthcare: Evidence from a Systematic Meta-Review
Pellegrino, G., Gervasi, M., Angelelli, M., & Corallo, A. (2024) · Information Systems Frontiers · doi:10.1007/s10796-024-10536-4 · Cited by 85
Geometrical Variations Management 4.0: towards next Generation Geometry Assurance
Schleich, B., Wärmefjord, K., Söderberg, R., & Wartzack, S. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.04.078 · Cited by 63
A systematic review on the current research of digital twin in automotive application
Deng, S., Ling, L., Zhang, C., Li, C., Zeng, T., Zhang, K., & Guo, G. (2023) · Internet of Things and Cyber-Physical Systems · doi:10.1016/j.iotcps.2023.04.004 · Cited by 61
Virtual monitoring method for hydraulic supports based on digital twin theory
Xie, J., Wang, X., Yang, Z., & Hao, S. (2019) · Mining Technology · doi:10.1080/25726668.2019.1569367 · Cited by 69
Cloud-Edge Hosted Digital Twins for Coordinated Control of Distributed Energy Resources
Han, J., Hong, Q., Syed, M. H., Khan, A., Yang, G., Burt, G., & Booth, C. D. (2022) · IEEE Transactions on Cloud Computing · doi:10.1109/tcc.2022.3191837 · Cited by 59
Application Status and Prospect of Digital Twin for On-Orbit Spacecraft
Yang, W., Zheng, Y., & Li, S. (2021) · IEEE Access · doi:10.1109/access.2021.3100683 · Cited by 58
Knowledge map and forecast of digital twin in the construction industry: State-of-the-art review using scientometric analysis
Xie, H. S., Xin, M., Lu, C., & Xu, J. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.135231 · Cited by 60
Digital twins in human understanding: a deep learning-based method to recognize personality traits
Sun, J., Tian, Z., Fu, Y., Geng, J., & Liu, C. (2020) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2020.1757155 · Cited by 59
Digital Twins as the Next Phase of Cyber-Physical Systems in Construction
Kan, C., & Anumba, C. (2019) · Computing in Civil Engineering · doi:10.1061/9780784482438.033 · Cited by 54
Digital Twin Application for Production Optimization
Jeon, S., & Schuesslbauer, S. (2020) · IEEE International Conference on Industrial Engineering and Engineering Management · doi:10.1109/ieem45057.2020.9309874 · Cited by 41
Digital Twin Technologies for Turbomachinery in a Life Cycle Perspective: A Review
Xie, R., Chen, M., Liu, W., Jian, H., & Shi, Y. (2021) · Sustainability · doi:10.3390/su13052495 · Cited by 59
Digital Twin and web services for robotic deburring in intelligent manufacturing
Stan, L., Nicolescu, A. F., Pupăză, C., & Jiga, G. G. (2022) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-01928-x · Cited by 58
The potential of the Medical Digital Twin in diabetes management: a review
Chu, Y., Li, S., Tang, J., & Wu, H. (2023) · Frontiers in Medicine · doi:10.3389/fmed.2023.1178912 · Cited by 57
Lean Transformation Integrated with Industry 4.0 Implementation Methodology
Satoğlu, Ş. I., Üstündağ, A., Çevikcan, E., & Durmuşoğlu, M. B. (2017) · Lecture notes in management and industrial engineering · doi:10.1007/978-3-319-71225-3_9 · Cited by 57
Background and Concept of Digital Twin
Tao, F., Zhang, M., & Nee, A. Y. C. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-817630-6.00001-1 · Cited by 57
A flexible manufacturing assembly system with deep reinforcement learning
Li, J., Pang, D., Zheng, Y., Guan, X., & Le, X. (2021) · Control Engineering Practice · doi:10.1016/j.conengprac.2021.104957 · Cited by 55
Building a Lightweight Digital Twin of a Crane Boom for Structural Safety Monitoring Based on a Multifidelity Surrogate Model
Lai, X., He, X., Wang, S., Wang, X., Sun, W. F., & Song, X. (2022) · Journal of Mechanical Design · doi:10.1115/1.4053606 · Cited by 56
A multidisciplinary approach to the development of digital twin models of critical care delivery in intensive care units
Zhong, X., Sarijaloo, F. B., Prakash, A., Park, J., Huang, C., Barwise, A., Herasevich, V., Gajic, O., Pickering, B., & Dong, Y. (2022) · International Journal of Production Research · doi:10.1080/00207543.2021.2022235 · Cited by 42
The realm of metaverse: A survey
Prakash, J., V, Vijay, S. A. A., & Peatchimuthu, J. (2023) · Computer Animation and Virtual Worlds · doi:10.1002/cav.2150 · Cited by 59
Developing and leveraging digital twins in engineering design
Anwer, N., Stark, R., Tao, F., & Erkoyuncu, J. A. (2025) · CIRP Annals · doi:10.1016/j.cirp.2025.05.002 · Cited by 58
Airframe digital twin technology adaptability assessment and technology demonstration
Liao, M., Renaud, G., & Bombardier, Y. (2019) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2019.106793 · Cited by 55
Equipment Design Optimization Based on Digital Twin Under the Framework of Zero-Defect Manufacturing
Mourtzis, D., Angelopoulos, J., & Panopoulos, N. (2021) · Procedia Computer Science · doi:10.1016/j.procs.2021.01.271 · Cited by 55
The digital twin of the quality monitoring and control in the series solar cell production line
Pei, F., Tong, Y., Yuan, M., Ding, K., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.02.001 · Cited by 55
B5GEMINI: AI-Driven Network Digital Twin
Mozo, A., Karamchandani, A., Gómez-Canaval, S., Sanz, M., Moreno, J. I., & Pastor, A. (2022) · Italian National Conference on Sensors · doi:10.3390/s22114106 · Cited by 51
A review of digital twin technology for electromechanical products: Evolution focus throughout key lifecycle phases
Cui, Z., Yang, X., Yue, J., Liu, X., Tao, W., Xia, Q., & Wu, C. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.07.016 · Cited by 54
Exploring digital twin systems in mining operations: A review
Nobahar, P., Xu, C., Dowd, P. A., & Faradonbeh, R. S. (2024) · Green and Smart Mining Engineering · doi:10.1016/j.gsme.2024.09.003 · Cited by 75
Physics-driven cross domain digital twin framework for bearing fault diagnosis in non-stationary conditions
Peng, D., Yazdanianasr, M., Mauricio, A., Verwimp, T., Desmet, W., & Gryllias, K. (2025) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2024.112266 · Cited by 54
Applying digital twins for the management of information in turnaround event operations in commercial airports
Conde, J., Muñoz-Arcentales, A., Romero, M., Rojo, J., Salvachúa, J., Huecas, G., & Alonso, Á. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101723 · Cited by 56
Requirements for the application of the Digital Twin Paradigm to offshore wind turbine structures for uncertain fatigue analysis
Jorgensen, J., Hodkiewicz, M., Cripps, E., & Hassan, G. M. (2023) · Computers in industry (Print) · doi:10.1016/j.compind.2022.103806 · Cited by 44
A Future with Machine Learning: Review of Condition Assessment of Structures and Mechanical Systems in Nuclear Facilities
Sandhu, H. K., Bodda, S. S., & Gupta, A. (2023) · Energies · doi:10.3390/en16062628 · Cited by 60
Revamping structural health monitoring of advanced rail transit systems: A paradigmatic shift from digital shadows to digital twins
Adeagbo, M. O., Wang, S.-M., & Ni, Y. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102450 · Cited by 55
The Development and use of a Digital Twin Model for Tire Touchdown Health Monitoring
Zakrajsek, A. J., & Mall, S. (2017) · AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (SDM) · doi:10.2514/6.2017-0863 · Cited by 53
On Digital Twins, Mirrors, and Virtualizations: Frameworks for Model Verification and Validation
Keith Worden, B., Cross, E. J., Barthorpe, R. J., Wagg, D., & Gardner, P. A. (2020) · ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B Mechanical Engineering · doi:10.1115/1.4046740 · Cited by 53
Modeling of Digital Twin Workshop Based on Perception Data
Zhang, Q., Zhang, X., Xu, W., Liu, A.-M., Zhou, Z.-D., & Pham, D. (2017) · International Conference on Intelligent Robotics and Applications · doi:10.1007/978-3-319-65298-6_1 · Cited by 47
A Case Study for a Digital Twin of Body-in-White Production Systems General Concept for Automated Updating of Planning Projects in the Digital Factory
Biesinger, F., Meike, D., Krass, B., & Weyrich, M. (2018) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2018.8502467 · Cited by 52
A digital twin-based machining motion simulation and visualization monitoring system for milling robot
Zhu, Z.-J., Lin, Z.-M., Huang, J., Zheng, L., & He, B. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11827-x · Cited by 44
Working mode in aircraft manufacturing based on digital coordination model
Guo, F., Zou, F., Liu, J., & Wang, Z. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2048-0 · Cited by 51
A survey of feature modeling methods: Historical evolution and new development
Li, L., Zheng, Y., Yang, M., Leng, J., Cheng, Z., Xie, Y., Jiang, P., & Ma, Y. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101851 · Cited by 54
Toward a Digital Twin: Time Series Prediction Based on a Hybrid Ensemble Empirical Mode Decomposition and BO-LSTM Neural Networks
Hu, W., He, Y., Liu, Z., Tan, J., Yang, M. Y., & Chen, J.-C. (2020) · Journal of Mechanical Design · doi:10.1115/1.4048414 · Cited by 52
Digital Twin-Based Risk Control during Prefabricated Building Hoisting Operations
Liu, Z., Li, A., Sun, Z., Shi, G., & Meng, X. (2022) · Sensors · doi:10.3390/s22072522 · Cited by 50
A dynamic data driven reliability prognosis method for structural digital twin and experimental validation
Ye, Y., Yang, Q., Zhang, J., Meng, S., & Wang, J. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109543 · Cited by 50
Building blocks for digital twin of reconfigurable machine tools from design perspective
Huang, S., Wang, G., & Yan, Y. (2020) · International Journal of Production Research · doi:10.1080/00207543.2020.1847340 · Cited by 50
Low- and high-fidelity modeling of sandwich-structured composite response to bird strike, as tools for a digital-twin-assisted damage diagnosis
Giannaros, E., Κοτζακόλιος, Α., Kostopoulos, V., Sotiriadis, G., Vignjević, R., Djordjevic, N., Boccaccio, M., & Meo, M. (2021) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2021.104058 · Cited by 50
A review study on digital twins with artificial intelligence and internet of things: concepts, opportunities, challenges, tools and future scope
Zayed, S. M., Attiya, G., El‐Sayed, A., & Hemdan, E. E. (2023) · Multimedia Tools and Applications · doi:10.1007/s11042-023-15611-7 · Cited by 51
A digital twin feasibility study (Part I): Non-deterministic predictions of fatigue life in aluminum alloy 7075-T651 using a microstructure-based multi-scale model
Yeratapally, S. R., Leser, P. E., Hochhalter, J. D., Leser, W. P., & Ruggles, T. (2020) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2020.106888 · Cited by 49
Digital Twin Approach for Tool Wear Monitoring of Micro-Milling
Christiand, C., & Kiswanto, G. (2020) · Procedia CIRP · doi:10.1016/j.procir.2020.03.140 · Cited by 49
Coupling Damage-Sensing Particles to the Digitial Twin Concept
Hochhalter, J. D., Leser, W. P., Newman, J. A., Glaessgen, E. H., Gupta, V. K., & Yamakov, V. I. (2014) · Cited by 48
A dynamic Bayesian network approach for digital twin
Li, C., Mahadevan, S., Ling, Y., Wang, L., & Choze, S. (2017) · AIAA Non-Deterministic Approaches Conference · doi:10.2514/6.2017-1566 · Cited by 48
Study on the Reference Architecture and Assessment Framework of Industrial Internet Platform
Li, J., Qiu, J., Zhou, Y. Q., Wen, S., Dou, K., & Li, Q. (2020) · IEEE Access · doi:10.1109/access.2020.3021719 · Cited by 49
Probabilistic machine learning based predictive and interpretable digital twin for dynamical systems
Tripura, T., Desai, A. S., Adhikari, S., & Chakraborty, S. (2023) · Computers & Structures · doi:10.1016/j.compstruc.2023.107008 · Cited by 47
Real-time Modeling and Simulation Method of Digital Twin Production Line
Gao, Y., Lv, H., Hou, Y., Liu, J., & Xu, W. (2019) · 2019 IEEE 8th Joint International Information Technology and Artificial Intelligence Conference (ITAIC) · doi:10.1109/itaic.2019.8785703 · Cited by 63
A graphics-based digital twin framework for computer vision-based post-earthquake structural inspection and evaluation using unmanned aerial vehicles
Wang, S., Rodgers, C. J., Zhai, G., Matiki, T. N., Welsh, B., Najafi, A., Wang, J., Narazaki, Y., Hoskere, V., & Spencer, B. F. (2022) · Journal of Infrastructure Intelligence and Resilience · doi:10.1016/j.iintel.2022.100003 · Cited by 47
Constrained Optimization of Sensor Placement for Nuclear Digital Twins
Karnik, N., Abdo, M. G., Estrada-Pérez, C. E., Yoo, J., Cogliati, J. J., Skifton, R., Calderoni, P., Brunton, S. L., & Manohar, K. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2024.3368875 · Cited by 48
Reducing uncertainty in fatigue life limits of turbine engine alloys
Larsen, J. M., Jha, S. K., Szczepanski, C. J., Caton, M. J., John, R., Rosenberger, A. H., Buchanan, D., Golden, P. J., & Jira, J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2013.01.012 · Cited by 47
Digital Twin Concepts in Manufacturing Industries - A Literature Review and Avenues for Further Research
Holler, M., Uebernickel, F., & Brenner, W. (2016) · Alexandria (UniSG) (University of St.Gallen) · Cited by 47
What makes Data Science different? A discussion involving Statistics2.0 and Computational Sciences
Ley, C., & Bordas, S. (2018) · International Journal of Data Science and Analytics · doi:10.1007/s41060-017-0090-x · Cited by 46
Revolution on digital twin technology—a patent research approach
Wang, K., Lee, T., & Hsu, Y. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05314-w · Cited by 48
Quantifying the unknown impact of segmentation uncertainty on image-based simulations
Krygier, M., LaBonte, T., Martinez, C., Norris, C., Sharma, K., Collins, L. N., Mukherjee, P. P., & Roberts, S. A. (2021) · RePEc: Research Papers in Economics · Cited by 47
DTQFL: A Digital Twin-Assisted Quantum Federated Learning Algorithm for Intelligent Diagnosis in 5G Mobile Network
Qu, Z., Li, Y., Liu, B., Gupta, D., & Tiwari, P. (2023) · IEEE Journal of Biomedical and Health Informatics · doi:10.1109/jbhi.2023.3303401 · Cited by 47
A critical review of challenges and opportunities for the design and operation of offshore structures supporting renewable hydrogen production, storage, and transport
Rodríguez, C. A., Yeter, B., Li, S., Brennan, F., & Collu, M. (2024) · Wind energy science · doi:10.5194/wes-9-533-2024 · Cited by 46
Introduction of a comprehensive Structure Model for the Digital Twin in Manufacturing
Lechler, T., Fuchs, J., Sjarov, M., Brossog, M., Selmaier, A., Faltus, F., Donhauser, T., & Franke, J. E. (2020) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa46521.2020.9212030 · Cited by 47
Implementation strategy of physical entity for manufacturing system digital twin
Wei, Y., Hu, T., Wang, Y., Wei, S., & Luo, W. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2021.102259 · Cited by 45
New digital triad (DT-II) concept for lifecycle information integration of sustainable manufacturing systems
Bi, Z., Zhang, W., Wu, C., & Li, L. (2021) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2021.100316 · Cited by 47
Digital twins and blockchain technology in the industrial Internet of Things (IIoT) using an extended decision support system model: Industry 4.0 barriers perspective
Li, Y., Su, D. A., & Mardani, A. (2023) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2023.122794 · Cited by 47
A novel digital-twin approach based on transformer for photovoltaic power prediction
Zhao, X. (2024) · Scientific Reports · doi:10.1038/s41598-024-76711-4 · Cited by 45
Current Status and Prospects of Digital Twin Approaches in Structural Health Monitoring
Wang, Q., Huang, B., Gao, Y., & Jiao, C. (2025) · Buildings · doi:10.3390/buildings15071021 · Cited by 48
Developing a selective assembly technique for sheet metal assemblies
Aderiani, A. R., Wärmefjord, K., Söderberg, R. C., & Lindkvist, L. (2019) · International Journal of Production Research · doi:10.1080/00207543.2019.1581387 · Cited by 45
A Product Quality Monitor Model With the Digital Twin Model and the Stacked Auto Encoder
Zhang, S.-Z., Kang, C.-F., Liu, Z., Wu, J., & Ma, C.-M. (2020) · IEEE Access · doi:10.1109/access.2020.3003723 · Cited by 35
A digital twin dosing system for iron reverse flotation
Zhang, D., & Gao, X. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.03.006 · Cited by 46
The FMS Training Center - a versatile learning environment for engineering education
Toivonen, V., Lanz, M., Nylund, H., & Nieminen, H. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.04.006 · Cited by 45

Authors: Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M.
Affiliations: United States Air Force Research Laboratory (US)
Cornell University (US)
Corresponding author: Tuegel, Eric J.
ORCID: Tuegel, Eric J.
Ingraffea, Anthony R.
Spottswood, S. Michael
Venue: International Journal of Aerospace Engineering
Publisher: Wiley
Published: 2011
Volume: 2011
Pages: 1-14
ISSN: 1687-5966 (ISSN-L)
1687-5974
DOI: 10.1155/2011/154798
OpenAlex: W2108366027
Cited by: 1,119
References: 45
Citations by year: 2026: 75 · 2025: 119 · 2024: 173 · 2023: 158 · 2022: 179 · 2021: 129 · 2020: 110 · 2019: 77 · 2018: 50 · 2017: 20 · 2016: 12 · 2015: 6 · 2014: 4 · 2013: 3 · 2012: 4
FWCI: 10.15
Type: journal article
Language: en
Open access: gold
doi.org
Licence: cc-by
creativecommons.org/licenses/by/3.0/ (unspecified)
Locations: International Journal of Aerospace Engineering (publishedVersion, cc-by)
DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics: Physical Sciences › Engineering › Civil and Structural Engineering › Structural Health Monitoring Techniques
Physical Sciences › Engineering › Mechanics of Materials › Fatigue and fracture mechanics
Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
Keywords: digital twin, structural integrity, structural deflection, temperature prediction, local damage, flight conditions, aircraft structural health monitoring

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Reengineering Aircraft Structural Life Prediction Using a Digital Twin

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Self-check

Citations

Cites

Cited by

Related

Metadata

Record

About these checks