The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Needleless Melt‐Electrospinning of Polypropylene Nanofibres
Open accessAbstract
Polypropylene (PP) nanofibres have been electrospun from molten PP using a needleless melt‐electrospinning setup containing a rotary metal disc spinneret. The influence of the disc spinneret (e.g., disc material and diameter), operating parameters (e.g., applied voltage, spinning distance), and a cationic surfactant on the fibre formation and average fibre diameter were examined. It was shown that the metal material used for making the disc spinneret had a significant effect on the fibre formation. Although the applied voltage had little effect on the fibre diameter, the spinning distance affected the fibre diameter considerably, with shorter spinning distance resulting in finer fibres. When a small amount of cationic surfactant (dodecyl trimethyl ammonium bromide) was added to the PP melt for melt‐electrospinning, the fibre diameter was reduced considerably. The finest fibres produced from this system were 400 ± 290 nm. This novel melt‐electrospinning setup may provide a continuous and efficient method to produce PP nanofibres.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
Electrospinning process and applications of electrospun fibers
Doshi, J., & Reneker, D. H. (1995) · Journal of Electrostatics · doi:10.1016/0304-3886(95)00041-8 · Cited by 3,209
Direct Fabrication of Composite and Ceramic Hollow Nanofibers by Electrospinning
Li, D., & Xia, Y. (2004) · Nano Letters · doi:10.1021/nl049590f · Cited by 1,300
Surfactant Science and Technology
Myers, D. (2020) · Wiley eBooks · doi:10.1002/9781119465829 · Cited by 1,074
Surfactant Science and Technology
Myers, D. (2005) · Wiley eBooks · doi:10.1002/047174607x · Cited by 891
Larrondo, L., & St. John Manley, R. (1981) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1981.180190601 · Cited by 490
Melt-electrospinning part I: processing parameters and geometric properties
Lyons, J., Li, C., & Ko, F. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.071 · Cited by 401
The thermal effects on electrospinning of polylactic acid melts
Zhou, H., Green, T. B., & Joo, Y. L. (2006) · Polymer · doi:10.1016/j.polymer.2006.08.042 · Cited by 399
Electrospinning of polymer melts: Phenomenological observations
Dalton, P. D., Grafahrend, D., Klinkhammer, K., Klee, D., & Möller, M. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.037 · Cited by 357
Lin, T., Wang, H., Wang, H., & Wang, X. (2004) · Nanotechnology · doi:10.1088/0957-4484/15/9/044 · Cited by 329
Self-citation
Cited by
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
Current state of fabrication technologies and materials for bone tissue engineering
Wubneh, A., Tsekoura, E. K., Ayranci, C., & Uludağ, H. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.031 · Cited by 584
Melt electrospinning today: An opportune time for an emerging polymer process
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.01.001 · Cited by 542
The Next Frontier in Melt Electrospinning: Taming the Jet
Robinson, T. M., Hutmacher, D. W., & Dalton, P. D. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904664 · Cited by 267
da Silva, D. J., & Wiebeck, H. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02396-3 · Cited by 58
Metadata
- Authors
- Fang, J., Zhang, L., Sutton, D., Wang, X., & Lin, T.
- Venue
- Journal of Nanomaterials
- Publisher
- Wiley
- Published
- 2012-01
- Volume
- 2012
- Issue
- 1
- ISSN
- 1687-4110 (ISSN-L)
- 1687-4129
- OpenAlex
- W1995091683
- Cited by
- 334
- References
- 33
- FWCI
- 1.92
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Needleless Melt‐Electrospinning of Polypropylene Nanofibres. https://app.cochat.ai/papers/10.1155/2012/382639
- The paper
- Fang, J., Zhang, L., Sutton, D., Wang, X., & Lin, T. (2012). Needleless Melt‐Electrospinning of Polypropylene Nanofibres. Journal of Nanomaterials. https://doi.org/10.1155/2012/382639
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.