Mechanical Properties and Morphological Characterization of PLA/Chitosan/Epoxidized Natural Rubber Composites
Open accessThe DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
Poly (lactic acid) (PLA)/chitosan (CS) natural polymer/epoxidised natural rubber (ENR) composites were successfully prepared through a solution casting method. The morphological characteristics of fabricated composites were investigated by scanning electron microscopy (SEM) and optical microscopy. The microstructure of PLA/ENR was significantly altered with the addition of CS. SEM analysis of composites fractured surfaces revealed smooth and homogeneous texture and good dispersion of CS. However for 15 wt% CS composites, the phase segregation and poor adhesion between the polymers were observed. Fourier transform infrared spectroscopy revealed some levels of attractive interaction between CS, PLA, and ENR in the composites. The mechanical properties of composites in terms of tensile strength and tensile modulus were significantly improved with the addition of CS into the matrix while the percent elongation at break decreased. The tensile strength increased up to 5 wt% CS loading for both PLA/CS and PLA/ENR/CS and thereafter decreased while Young’s modulus increased up to 10 wt%. However, when the CS content was increased to 15 wt%, the tensile strength and tensile modulus were slightly decreased. These improvements were attributed to good dispersion of CS at the optimum filler levels and attractive interaction between the composites components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrospinning of Nanofibers: Reinventing the Wheel?
Li, D., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400719 · Cited by 5,521
Chitosan Chemistry and Pharmaceutical Perspectives
Kumar, M. N. V. R., Muzzarelli, R. A. A., Muzzarelli, C., Sashiwa, H., & Domb, A. J. (2004) · Chemical Reviews · doi:10.1021/cr030441b · Cited by 2,938
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Chitins and chitosans for the repair of wounded skin, nerve, cartilage and bone
Muzzarelli, R. A. A. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.11.002 · Cited by 1,103
Novel chitin and chitosan nanofibers in biomedical applications
Jayakumar, R., Prabaharan, M., Nair, S. V., & Tamura, H. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2009.11.001 · Cited by 1,013 · cited 1×
“CS was used to create edible coatings or films to extend foodstuffs’ shelf life, such as fruits, meat, fish, and seafood [15, 16].”
MethodJonoobi, M., Harun, J., Mathew, A. P., & Oksman, K. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.07.005 · Cited by 863
Mathew, A. P., Oksman, K., & Sain, M. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21779 · Cited by 851
Manufacturing process of cellulose whiskers/polylactic acid nanocomposites
Oksman, K., Mathew, A. P., Bondeson, D., & Kvien, I. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.03.002 · Cited by 783
Structure and thermal properties of poly(lactic acid)/cellulose whiskers nanocomposite materials
Petersson, L., Kvien, I., & Oksman, K. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.12.012 · Cited by 576
Pei, A., Zhou, Q., & Berglund, L. A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.01.018 · Cited by 524
Isolation and characterization of microcrystalline cellulose from oil palm biomass residue
Mohamad Haafiz, M. K., Eichhorn, S. J., Hassan, A., & Jawaid, M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.035 · Cited by 434
Self-citationWater absorption and enzymatic degradation of poly(lactic acid)/rice starch composites
Yew, G. H., Mohd Yusof, A. M., Mohd Ishak, Z. A., & Ishiaku, U. S. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.04.006 · Cited by 374
Preparation and characterization of keratin–chitosan composite film
Tanabe, T., Okitsu, N., Tachibana, A., & Yamauchi, K. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00187-9 · Cited by 316
Properties of melt processed chitosan and aliphatic polyester blends
Correlo, V. M., Boesel, L. F., Bhattacharya, M., Mano, J. F., Neves, N. M., & Reis, R. L. (2005) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.04.055 · Cited by 261
Cheng, Q., Wang, S., & Rials, T. G. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.11.009 · Cited by 254
Nanocomposites of poly(lactic acid) reinforced with cellulose nanofibrils
Qu, P., Gao, Y., Wu, G.-F., & Zhang, L.-P. (2010) · BioResources · doi:10.15376/biores.5.3.1811-1823 · Cited by 221
A perspective on 30 years research on chitin and chitosan
Domard, A. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.04.083 · Cited by 197 · cited 1×
“These polymers are being widely used in the biomedical area, including wound dressing, drug delivery system, and tissue engineering scaffolds [3, 4].”
BackgroundBiomedical applications of chitin hydrogel membranes and scaffolds
Tamura, H., Furuike, T., Nair, S. V., & Jayakumar, R. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.06.001 · Cited by 164
Jeevitha, D., & Amarnath, K. (2012) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2012.06.019 · Cited by 121
Preparation and characterization of biodegradable poly(l-lactide)/chitosan blends
Chen, C., Dong, L., & Cheung, M. K. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2004.12.002 · Cited by 104
Preparation and characterization of hexanoyl chitosan/polylactide blend films
Peesan, M., Supaphol, P., & Rujiravanit, R. (2005) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.01.008 · Cited by 104
Zakaria, Z., Izzah, Z., Jawaid, M., & Hassan, A. (2012) · BioResources · doi:10.15376/biores.7.4.5568-5580 · Cited by 97
Self-citationGrande, R., & Carvalho, A. J. F. (2011) · Biomacromolecules · doi:10.1021/bm101227q · Cited by 96
Hydroxyapatite Reinforced Chitosan and Polyester Blends for Biomedical Applications
Correlo, V. M., Boesel, L. F., Bhattacharya, M., Mano, J. F., Neves, N. M., & Reis, R. L. (2005) · Macromolecular Materials and Engineering · doi:10.1002/mame.200500163 · Cited by 74
Preparation, Properties and Applications of Chitosan-Based Biocomposites/Blend Materials: A Review
Julkapli, N. M., Akil, H. M., & Ahmad, Z. (2011) · Composite Interfaces · doi:10.1163/156855411x610232 · Cited by 71
Compatibilization method applied to the chitosan‐acid poly( L ‐lactide) solution
Suyatma, N. E., Copinet, A., Coma, V., & Fricoteaux, F. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32115 · Cited by 28
Epoxidized natural rubber toughened polyamide 6/organically modified montmorillonite nanocomposites
Balakrishnan, H., Navid, N., Wahit, M. U., Hassan, A., & Imran, M. (2012) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705712461517 · Cited by 14
Self-citationDrumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e
Research works printed but not linked: 3
- 2012, Bioresources, 7, 5568
- 2012, Journal of Thermoplastic Composite Materials, 26, 1
- 10.1002/adma.200400719 · DOI · Paper page
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Ilyas, R., Aisyah, H., Nordin, A., Ngadi, N., Zuhri, M., Asyraf, M., Sapuan, S., Zainudin, E., Sharma, S., Abral, H., et al. (2022) · Polymers · doi:10.3390/polym14050874 · Cited by 258
Habiba, U., Siddique, T. A., Joo, T. C., Salleh, A., Ang, B. C., & Afifi, A. M. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.11.037 · Cited by 243
Materials for food packaging applications based on bio-based polymer nanocomposites: A review
Attaran, S. A., Hassan, A., & Wahit, M. U. (2017) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705715588801 · Cited by 170
Self-citation
Metadata
- Authors
- Zakaria, Z., Islam, M. S., Hassan, A., Mohamad Haafiz, M. K., Arjmandi, R., Inuwa, I. M., & Hasan, M.
- Affiliations
- University of Technology Malaysia (MY)
- Universiti Putra Malaysia (MY)
- Department of Polymer Engineering, Faculty of Chemical Engineering, Universiti Teknologi Malaysia, 81310 Skudai, Johor, Malaysia
- Corresponding author
- Zakaria, Zainoha
- Venue
- Advances in Materials Science and Engineering
- Publisher
- Wiley
- Published
- 2013
- Volume
- 2013
- Pages
- 1-7
- ISSN
- 1687-8434 (ISSN-L)
- 1687-8442
- OpenAlex
- W2032977557
- Cited by
- 89
- References
- 28
- Citations by year
- 2025: 9 · 2024: 8 · 2023: 5 · 2022: 4 · 2021: 14 · 2020: 9 · 2019: 15 · 2018: 5 · 2017: 3 · 2016: 10 · 2015: 6 · 2014: 1
- FWCI
- 4.09
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Advances in Materials Science and Engineering (publishedVersion, cc-by)
- Aston Publications Explorer (Aston University) (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Greater South Information System
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Keywords
- polylactic acid, chitosan, epoxidized natural rubber, polymer blends, natural polymer composites, tensile strength, Young's modulus, elongation at break, phase segregation, interfacial adhesion, filler dispersion, polymer-polymer interactions
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.