The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Open accessAbstract
Natural fibers are getting attention from researchers and academician to utilize in polymer composites due to their ecofriendly nature and sustainability. The aim of this review article is to provide a comprehensive review of the foremost appropriate as well as widely used natural fiber reinforced polymer composites (NFPCs) and their applications. In addition, it presents summary of various surface treatments applied to natural fibers and their effect on NFPCs properties. The properties of NFPCs vary with fiber type and fiber source as well as fiber structure. The effects of various chemical treatments on the mechanical and thermal properties of natural fibers reinforcements thermosetting and thermoplastics composites were studied. A number of drawbacks of NFPCs like higher water absorption, inferior fire resistance, and lower mechanical properties limited its applications. Impacts of chemical treatment on the water absorption, tribology, viscoelastic behavior, relaxation behavior, energy absorption flames retardancy, and biodegradability properties of NFPCs were also highlighted. The applications of NFPCs in automobile and construction industry and other applications are demonstrated. It concluded that chemical treatment of the natural fiber improved adhesion between the fiber surface and the polymer matrix which ultimately enhanced physicomechanical and thermochemical properties of the NFPCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Silane coupling agents used for natural fiber/polymer composites: A review
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,244
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Abdul Khalil, H. P. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,567
Self-citationNatural-fiber-reinforced polymer composites in automotive applications
Holbery, J., & Houston, D. (2006) · JOM · doi:10.1007/s11837-006-0234-2 · Cited by 1,565
A review on the degradability of polymeric composites based on natural fibres
Azwa, Z. N., Yousif, B. F., Manalo, A. C., & Karunasena, W. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.11.025 · Cited by 1,530
Rong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047
Processing and characterization of natural cellulose fibers/thermoset polymer composites
Thakur, V. K., & Thakur, M. K. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.039 · Cited by 990
AL-Oqla, F. M., & Sapuan, S. M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.050 · Cited by 782
Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete
Banthia, N., & Gupta, R. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.01.010 · Cited by 700
Influence of various chemical treatments on the composition and structure of hemp fibres
Troëdec, M. L., Sedan, D., Peyratout, C. S., Bonnet, J. P., Smith, A., Guinebretière, R., Gloaguen, V., & Krausz, P. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.12.001 · Cited by 700
Gassan, J., & Bledzki, A. K. (1999) · Composites Science and Technology · doi:10.1016/s0266-3538(98)00169-9 · Cited by 697
Ecodesign of automotive components making use of natural jute fiber composites
Alves, C., Ferrão, P. M. C., Silva, A. J., Reis, L. G., Freitas, M., Rodrigues, L. B., & Alves, D. E. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.10.022 · Cited by 644
Cellulose Fibers: Bio- and Nano-Polymer Composites: Green Chemistry and Technology
(2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7 · Cited by 626
Graupner, N., Herrmann, A. S., & Müssig, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.003 · Cited by 608
Shalwan, A., & Yousif, B. F. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.07.014 · Cited by 607
Influence of processing and chemical treatment of flax fibres on their composites
de Weyenberg, I. V., Ivens, J., Coster, A. D., Kino, B., Baetens, E., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00093-9 · Cited by 586
Oil palm fiber (OPF) and its composites: A review
Shinoj, S., Visvanathan, R., Panigrahi, S., & Kochubabu, M. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.09.009 · Cited by 523
Sain, M. M., Sung Heum, P. A. R. K., Suhara, F., & Law, S. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00280-5 · Cited by 522
Oil palm biomass as a sustainable energy source: A Malaysian case study
Shuit, S. H., Tan, K. T., Lee, K. T., & Kamaruddin, A. H. (2009) · Energy · doi:10.1016/j.energy.2009.05.008 · Cited by 503
Properties and performance of natural-fibre composites
Pickering, K. L. (2008) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845694593 · Cited by 484
Natural fiber composites with plant oil-based resin
O'Donnell, A., Dweib, M. A., & Wool, R. P. (2004) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.09.024 · Cited by 443
Fiore, V., Scalici, T., & Valenza, A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.016 · Cited by 417
Effect of fibre surface modification on water-sorption characteristics of oil palm fibres
Sreekala, M. S., & Thomas, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00270-1 · Cited by 381
Tribological behavior of natural fiber reinforced PLA composites
Bajpai, P. K., Singh, I., & Madaan, J. (2012) · Wear · doi:10.1016/j.wear.2012.10.019 · Cited by 366
Thermogravimetric behavior of natural fibers reinforced polymer composites—An overview
Monteiro, S. N., Calado, V. M. D. A., Rodríguez, R. J. S., & Margem, F. M. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.05.109 · Cited by 347
Effect of Chemical treatment on Flexure Properties of Natural Fiber-reinforced Polyester Composite
Rokbi, M., Osmani, H., Imad, A., & Benseddiq, N. (2011) · Procedia Engineering · doi:10.1016/j.proeng.2011.04.346 · Cited by 340
A REVIEW ON SISAL FIBER REINFORCED POLYMER COMPOSITES
Joseph, K., Tolêdo Filho, R. D., James, B., Thomas, S., & Carvalho, L. H. D. (1999) · Revista Brasileira de Engenharia Agrícola e Ambiental · doi:10.1590/1807-1929/agriambi.v3n3p367-379 · Cited by 330
Arrakhiz, F. Z., El Achaby, M., Malha, M., Bensalah, M. O., Fassi-Fehri, O., Bouhfid, R., Benmoussa, K., & Qaiss, A. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.06.056 · Cited by 315
Acoustical and fire-retardant properties of jute composite materials
Fatima, S., & Mohanty, A. R. (2011) · Applied Acoustics · doi:10.1016/j.apacoust.2010.10.005 · Cited by 297
Hapuarachchi, T. D., & Peijs, T. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.004 · Cited by 290
Processing and mechanical property evaluation of banana fiber reinforced polymer composites
Ramesh, M., Atreya, T. S. A., Aswin, U. S., Eashwar, H., & Deepa, C. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.12.284 · Cited by 289
Potential of kenaf fibres as reinforcement for tribological applications
Chin, C. W., & Yousif, B. F. (2009) · Wear · doi:10.1016/j.wear.2009.06.002 · Cited by 288
Evaluation of mechanical and thermal properties of banana–flax based natural fibre composite
Srinivasan, V., Boopathy, S. R., N, S. D., & Ramnath, B. V. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.03.014 · Cited by 280
Study of the interfacial properties of natural fibre reinforced polyethylene
Torres, F. G., & Cubillas, M. L. (2005) · Polymer Testing · doi:10.1016/j.polymertesting.2005.05.004 · Cited by 275
Norul Izani, M. A., Paridah, M. T., Anwar, U. M. K., Mohd Nor, M. Y., & H’ng, P. S. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.07.027 · Cited by 273
Venkateshwaran, N., Elaya Perumal, A., & Arunsundaranayagam, D. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.12.001 · Cited by 250
Sassoni, E., Manzi, S., Motori, A., Montecchi, M., & Canti, M. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.03.033 · Cited by 235
Zhan, J., Song, L., Nie, S., & Hu, Y. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.12.015 · Cited by 227
Effects of diammonium phosphate on the flammability and mechanical properties of bio-composites
Suardana, N. P. G., Ku, M. S., & Lim, J. K. (2011) · Materials & Design · doi:10.1016/j.matdes.2010.11.069 · Cited by 204
The response of natural fibre composites to ballistic impact by fragment simulating projectiles
Wambua, P., Vangrimde, B., Lomov, S., & Verpoest, I. (2007) · Composite Structures · doi:10.1016/j.compstruct.2005.07.006 · Cited by 200
Dai, D., & Fan, M. (2014) · Elsevier eBooks · doi:10.1533/9780857099228.1.3 · Cited by 191
Surface and thermal characterization of natural fibres treated with enzymes
George, M., Mussone, P. G., & Bressler, D. C. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.12.037 · Cited by 177
Concept selection of car bumper beam with developed hybrid bio-composite material
Davoodi, M. M., Sapuan, S. M., Ahmad, D., Aidy, A., Abdan, K., & Jonoobi, M. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.06.011 · Cited by 177
Effects of natural fibres reinforcement in lime plasters (kenaf and sisal vs. Polypropylene)
Bella, G. D., Fiore, V., Galtieri, G., Borsellino, C., & Valenza, A. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.02.026 · Cited by 176
Tran, T. P. T., Bénézet, J.-C., & Bergeret, A. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.04.012 · Cited by 175
Comparative Study of Dielectric Properties of Hybrid Natural Fiber Composites
Jayamani, E., Hamdan, S., Rahman, M. R., & Bakri, M. K. B. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.12.280 · Cited by 160
Kakroodi, A. R., Kazemi, Y., & Rodrigue, D. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.03.032 · Cited by 151
Kakroodi, A. R., Cheng, S., Sain, M. M., & Asiri, A. M. (2014) · Journal of Nanomaterials · doi:10.1155/2014/903498 · Cited by 142
Tawakkal, I. S. M. A., Cran, M. J., & Bigger, S. W. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.06.032 · Cited by 140
Alhuthali, A. M. S., Low, I. M., & Dong, C. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.04.038 · Cited by 138
Mechanical and physical properties of expanded starch, reinforced by natural fibres
Bénézet, J., Davidovic, A. S., Bergeret, A., Ferry, L., & Crespy, A. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.07.001 · Cited by 135
Nirmal, U., Yousif, B. F., Rilling, D., & Brevern, P. V. (2010) · Wear · doi:10.1016/j.wear.2010.02.004 · Cited by 135
Flax fibre reinforced PLA/TPS biocomposites flame retarded with multifunctional additive system
Bocz, K., Szolnoki, B., Marosi, A., Tábi, T., Władyka‐Przybylak, M., & Marosi, G. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.10.025 · Cited by 116
Gallo, E., Schartel, B., Acierno, D., Cimino, F., & Russo, P. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.07.005 · Cited by 108
Mechanical processing of bast fibres: The occurrence of damage and its effect on fibre structure
Hänninen, T., Thygesen, A., Mehmood, S., Madsen, B., & Hughes, M. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.01.025 · Cited by 104
Shinoj, S., Visvanathan, R., & Panigrahi, S. (2010) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2010.04.008 · Cited by 85
Hidayat, A., & Tachibana, S. (2012) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2012.02.007 · Cited by 85
Cordeiro, N., Ornelas, M., Ashori, A., Sheshmani, S., & Norouzi, H. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.11.001 · Cited by 78
Eng, C. C., Ibrahim, N. A., Zainuddin, N., Ariffin, H., & Yunus, W. M. Z. W. (2014) · The Scientific World JOURNAL · doi:10.1155/2014/213180 · Cited by 71
George, M., Mussone, P. G., Abboud, Z., & Bressler, D. C. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.06.080 · Cited by 63
Ghani, M. H. A., & Ahmad, S. (2011) · Advances in Materials Science and Engineering · doi:10.1155/2011/406284 · Cited by 54
Stress relaxation behaviour in oil palm fibres
Sreekala, M. S., Kumaran, M. G., & Thomas, S. (2001) · Materials Letters · doi:10.1016/s0167-577x(01)00237-3 · Cited by 49
Ren, B., Mizue, T., Koichi, G. O. D. A., et al. (2012) · Composite Structures · doi:10.1016/j.compstruct.2012.06.002 · Cited by 45
Nasir, M., Gupta, A. K., Beg, M. D. H., Chua, G. K., & Kumar, A. (2013) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2013.02.013 · Cited by 44
Cited by
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Recent advances in biodegradable polymers for sustainable applications
Samir, A., Ashour, F. H., Hakim, A. A. A., & Bassyouni, M. (2022) · npj Materials Degradation · doi:10.1038/s41529-022-00277-7 · Cited by 1,209
Advanced lightweight materials for Automobiles: A review
Zhang, W., & Xu, J. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110994 · Cited by 1,147
Gholampour, A., & Ozbakkaloglu, T. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-03990-y · Cited by 1,058
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Metadata
- Authors
- Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S.
- Venue
- International Journal of Polymer Science
- Publisher
- Hindawi Limited
- Published
- 2015
- Volume
- 2015
- Pages
- 1-15
- ISSN
- 1687-9422 (ISSN-L)
- 1687-9430
- OpenAlex
- W1932552562
- Cited by
- 1,657
- References
- 68
- FWCI
- 29.61
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.