Modelling and Interpretation of Adsorption Isotherms
Open accessThe DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Abstract
The need to design low-cost adsorbents for the detoxification of industrial effluents has been a growing concern for most environmental researchers. So modelling of experimental data from adsorption processes is a very important means of predicting the mechanisms of various adsorption systems. Therefore, this paper presents an overall review of the applications of adsorption isotherms, the use of linear regression analysis, nonlinear regression analysis, and error functions for optimum adsorption data analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The Langmuir isotherm is used when the adsorption process is monolayered with a fixed number of sites [16].”
From Adsorption of toxic metals from greywater using coconut husk biochar and spent green tea (2024) · cites this paper as [16]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728 · cited 1×
“The average relative error was developed byMarquardt [86] with the aim ofminimizing the fractional error distribution across the entire concentration range.”
MethodInsights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479 · cited 2×
“Harkin-Jura isotherm model assumes the possibility of multilayer adsorption on the surface of absorbents having heterogeneous pore distribution [32].”
BackgroundMethodOn the Structure of a Catalyst Surface
Sips, R. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746922 · Cited by 3,650 · cited 1×
“This isotherm model has a linear dependence on concentration in the numerator and an exponential function in the denomination which altogether represent adsorption equilibrium over a wide range of concentration of adsorbate which is applicable in either homogenous or heterogeneous systems because of its versatility [4…”
BackgroundRedlich, O., & Peterson, D. L. (1959) · The Journal of Physical Chemistry · doi:10.1021/j150576a611 · Cited by 2,607
Pore and solid diffusion models for fixed‐bed adsorbers
Weber, T. W., & Chakravorti, R. K. (1974) · AIChE Journal · doi:10.1002/aic.690200204 · Cited by 2,573 · cited 1×
“The Kiselev adsorption isotherm equation also known as localized monomolecular layer model [38] is only valid for surface coverage θ > 0.”
BackgroundAdsorption — from theory to practice
Dąbrowski, A. (2001) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(00)00082-8 · Cited by 2,375
Kinetics and thermodynamics of cadmium ion removal by adsorption onto nano zerovalent iron particles
Boparai, H. K., Joseph, M., & O’Carroll, D. M. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.11.029 · Cited by 1,561 · cited 2×
“The linear form of the Freundlich isotherm is as follows [17]:”
BackgroundMethodHo, Y.-S. (2006) · Water Research · doi:10.1016/j.watres.2005.10.040 · Cited by 1,325
Günay, A., Arslankaya, E., & Tosun, İ. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.12.034 · Cited by 1,122 · cited 2×
“A distinguishing feature of theDubinin-Radushkevich isotherm is the fact that it is temperature dependent; hence when adsorption data at different temperatures are plotted as a function of logarithm of amount adsorbed versus the square of potential energy, all suitable data can be obtained [13].”
BackgroundHAMDAOUI, O., & NAFFRECHOUX, E. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.021 · Cited by 1,013 · cited 2×
“Hamdaoui and Naffrechoux used the Flory-Huggins isothermmodel in their study of the biosorption of Zinc from aqueous solution using coconut coir dust [29].”
BackgroundMethod
Research works printed but not linked: 25
- N. Ayawei, M. Horsfall Jnr, and I. Spiff, "Rhizophora mangle waste as adsorbent for metal ions removal from aqueous solu- tion, " European Journal of Scientic Research, vol. 9, no. 1, p. 21, 2005.
- J. H. De Boer, The Dynamical Character of Adsorption, Oxford University Press, Oxford, England, 1953.
- P. S. Kumara, S. Ramalingamb, S. D. Kiruphac, A. Murugesanc, and S. Vidhyarevicsivanesam, "Adsorption behaviour of Nickel (II) onto cashew nut shell, " in Equilibrium, Thermodynamics, Kinetics, Mechanism and Process design. Chemical Engineering Journal, vol. 1169, pp. 122-131, Adsorption behaviour of Nickel (II) onto cashew nut shell, Equilibrium, 2010.
- P. Sampranpiboon, P. Charnkeitkong, and X. Feng, "Equilib- rium isotherm models for adsorption of zinc (II) ion from aqueous solution on pulp waste, " WSEAS Transactions on Environment and Development, vol. 10, pp. 35-47, 2014.
- U. Israel and U. M. Eduok, "Biosorption of zinc from aqueous solution using coconut (Cocos nuciferaL) coirdust, " Archives of Applied Science Research, vol. 4, pp. 809-819, 2012.
- H. Shahbeig, N. Bagheri, S. A. Ghorbanian, A. Hallajisani, and S. Poorkarimi, "A new adsorption isotherm model of aqueous solutions on granular activated carbon, " World Journal of Mod- elling and Simulation, vol. 9, no. 4, pp. 243-254, 2013.
- N. A. Ebelegi, S. S. Angaye, N. Ayawei, and D. Wankasi, "Removal of congo red from aqueous solutions using fly ash modified with hydrochloric acid, " British Journal of Applied Sci- ence and Technology, vol. 20, no. 4, pp. 1-7, 2017.
- F. Rania and N. S. Yousef, "Equilibrium and Kinetics studies of adsorption of copper (II) on natural Biosorbent, " International Journal of Chemical/Engineering and Applications, vol. 6, no. 5, 2015.
- R. H. Fowler and E. A. Guggenheim, Statistical Thermodynam- ics, Cambridge University Press, London, England, 1939.
- S. K. Knaebel, "Adsorbent selection, " International Journal of Trend in Research and Development, Adsorption Research, Incorporated Dublin, Ohio. 43016, 2004.
- A. V. C. Kiseler, "vapour adsorption in the formation of adsor- bate Mollecule Complexes on the surface, " Kolloid Zhur, vol. 20, pp. 338-348, 1958.
- M. Gubernak, W. Zapała, and K. Kaczmarski, "Analysis of amyl- benzene adsorption equilibria on an RP-18e chromatographic column, " Acta Chromatographica, no. 13, pp. 38-59, 2003.
- A. Achmad, J. Kassim, T. K. Suan, R. C. Amat, and T. L. Seey, "Equilibrium, kinetic and thermodynamic studies on the adsorption of direct dye onto a novel green adsorbent developed from Uncaria gambir extract, " Journal of Physical Science, vol. 23, no. 1, pp. 1-13, 2012.
- A. A. Israel, O. Okon, S. Umoren, and U. Eduok, "Kinetic and equilibrium studies of adsorption of lead (II) Ions from aqueous solution using coir dust (Cocos nucifera L) and it's modified extract resins, " The Holistic Approach to Environment, 2013.
- J. Toth, "State equation of the solid gas interface layer, " Acta Chimica (Academiae Scientiarum) Hungaricae, vol. 69, pp. 311- 317, 1971.
- T. Jafari Behbahani and Z. Jafari Behbahani, "A new study on asphaltene adsorption in porous media, " Petroleum and Coal, vol. 56, no. 5, pp. 459-466, 2014.
- T. Benzaoui, A. Selatnia, and D. Djabali, "Adsorption of copper (II) ions from aqueous solution using bottom ash of expired drugs incineration, " Adsorption Science and Technology, pp. 1- 16, 2017.
- O. Amrhar and M. S. NassaliElyoubi, "Two and three-parameter isothermal modeling for adsorption of Crystal Violet dye onto Natural Illitic Clay: nonlinear regression analysis, " Journal of Chemical and Pharmaceutical Research, vol. 7, no. 9, pp. 892- 903, 2015.
- O. Amrhar, H. Nassai, and M. S. Elyoubi, "Application of non- linear regression analysis to select the optimum absorption isotherm for Methylene Blue adsorption onto Natural Illitic Clay, " Bulletia de la societe Royale des Science de Kiege, vol. 84, pp. 116-130, 2015.
- G. Varank, A. Demir, K. YetiImezsoy, S. Top, E. Sekman, and M. S. Bilgili, "Removal of 4-nitrophenol from aqueous solution by natural low cost adsorbents, " Indian Journal of Chemical Technology, vol. 19, pp. 7-25, 2011.
- S. A. Al-Jlil and M. S. Latif, "Evaluation of Equilibrium iso- therms models for the adsorption of Cu and Ni from wastewater on Benronite clay, " Material and Technology, vol. 47, no. 4, pp. 481-486, 2013.
- M. F. Dilekoglu, "Use of generic algorithm optimzation Tech- niques in the adsorption of phenol on Banana and grapetruit peels, " Journal of the Chemical Society of Pakistan, vol. 38, no. 6, 2016.
- N. Singh and C. Balomajumder, "Removal of cyanide from aqueous media by adsorption using Al-activated carbon: para- metric experiments equilibrium, kinetics and thermodynamic analysis, " in Proceedings of the 2nd International Conference on Science, Technology and Management, University of Delhi, New Delhi, India, 2015.
- K. Vijayaraghavan, "Biosorption of Lan thamide (preseo- dymium) using ulva lactuca: mechanistic study and application of two, three, four and five parameter isotherm models, " Journal of Environment and Biotechnology Research, vol. 1, no. 1, pp. 1-8, 2015.
- C. Chen, "Evaluation of equilibrium sorption isotherm equa- tions, " Open Chemical Engineering Journal, vol. 7, pp. 24-44, 2003.
Cited by
Items 601–700 of 1,006
Matheri, A. N., Eloko, N. S., Ntuli, F., & Ngila, J. C. (2020) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2020.100018 · Cited by 37
Hashemi, E., Norouzi, M.-M., & Sadeghi‐Kiakhani, M. (2024) · Environmental Research · doi:10.1016/j.envres.2024.119548 · Cited by 36
Lu, Y., Priyantha, N., & Lim, L. B. L. (2020) · Surfaces and Interfaces · doi:10.1016/j.surfin.2020.100543 · Cited by 36
Mamman, S., Suah, F. B. M., Raoov, M., Mehamod, F. S., Asman, S. B., & Zain, N. N. M. (2021) · Royal Society Open Science · doi:10.1098/rsos.201604 · Cited by 36
Foucaud, Y., Canevesi, R. L. S., Celzard, A., Fierro, V., & Badawi, M. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.150137 · Cited by 36
“Besides, the experimental data can be fitted with well-known classical adsorption models [53,70], e.”
MethodBilal, M., Ihsanullah, I., Shah, M. U. H., & Younas, M. (2021) · Environmental Technology & Innovation · doi:10.1016/j.eti.2021.101922 · Cited by 36
Selahle, S. K., Mpupa, A., & Nomngongo, P. N. (2021) · Journal of Chromatography A · doi:10.1016/j.chroma.2021.462685 · Cited by 36
Shahrabadi, A., Daghbandan, A., & Arabiyoun, M. (2022) · Chemical Thermodynamics and Thermal Analysis · doi:10.1016/j.ctta.2022.100036 · Cited by 36
Abushawish, A., Almanassra, I. W., Backer, S. N., Jaber, L., Khalil, A. K. A., Abdelkareem, M. A., Sayed, E. T., Alawadhi, H., Shanableh, A., & Atieh, M. A. (2022) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2022.126758 · Cited by 36
Tonk, S., & Rápó, E. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms231911827 · Cited by 36
“(determined for 16 initial concentrations in the range 5 to 1000 mg/L), indicating favorable adsorption [47,48].”
BackgroundDíaz‐Uribe, C., Walteros, L., Duran, F., Vallejo, W., & Bohórquez, A. R. R. (2022) · ACS Omega · doi:10.1021/acsomega.2c05007 · Cited by 36
Msaadi, R., Yılmaz, G., Allushi, A., Hamadi, S., Ammar, S., Chehimi, M. M., & Yağcı, Y. (2019) · Polymers · doi:10.3390/polym11020286 · Cited by 36
“The adsorption isotherm of Cu2+ ions was checked whether it fits the Langmuir [54], Freundlich [55] or Jovanovic [56] isotherm models (see Figure 9) as described by Equations (9)–(11), respectively.”
MethodBenamer-Oudih, S., Tahtat, D., Khodja, A. N., Mansouri, B., Mahlous, M., Guittoum, A., & Kebbouche-Gana, S. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-27907-0 · Cited by 35
Ahmadpour, A., Tanhaei, B., Khoshkho, S. M., Ayati, A., Krivoshapkin, P. V., & Sillanpää, M. E. T. (2023) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2023.111274 · Cited by 35
Chu, P., Xie, H., Li, C., Liu, Q., Lu, Z., & Lü, J. (2024) · Physics of Fluids · doi:10.1063/5.0184321 · Cited by 35
AlJaberi, F. Y. (2024) · Water · doi:10.3390/w16040619 · Cited by 35
Removal of methylene blue dye from water with Fe3O4/poly(HEMA-co-AMPS) magnetic hydrogels
Huaman, M. A. L., Manco, A. E. Q., López, F. D. L. M., Carrasco, R. L. A., Chacón, A. M. L., & Khan, S. (2024) · Results in Chemistry · doi:10.1016/j.rechem.2024.101454 · Cited by 35
Food dye adsorption in single and ternary systems by the novel passion fruit peel biochar adsorbent
Cabral, L. L., Bottini, R. C. R., Gonçalves, A. J., Manzoni, M., Domingues, R. C. P. R., Lenzi, M. K., Nagalli, A., Passig, F. H., dos Santos, P. M., & de Carvalho, K. Q. (2024) · Food Chemistry · doi:10.1016/j.foodchem.2024.141592 · Cited by 35
Riyanto, C. A., & Prabalaras, E. (2019) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1307/1/012002 · Cited by 35
Oliveira, R. F., Nunes, K. G. P., Jurado-Davila, V., Amador, I. C. B., Estumano, D. C., & Féris, L. A. (2020) · Environmental Technology & Innovation · doi:10.1016/j.eti.2020.101092 · Cited by 35
Morphology controlled facile synthesis of MnO2 adsorbents for rapid strontium removal
Asim, U., Husnain, S. M., Abbas, N., Shahzad, F., Khan, A. R., & Ali, T. (2021) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2021.03.027 · Cited by 35
Awes, H., Zaki, Z., Abbas, S., Dessoukii, H., Zaher, A., Moaty, S. A. A., Shehata, N., Farghali, A. A., & Mahmoud, R. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-13685-0 · Cited by 35
Kurczewska, J., Ratajczak, M., & Gajęcka, M. (2021) · Applied Clay Science · doi:10.1016/j.clay.2021.106270 · Cited by 35
Sorption characteristics in coal and shale: A review for enhanced methane recovery
Qin, X., Singh, H., & Cai, J. (2021) · Capillarity · doi:10.46690/capi.2022.01.01 · Cited by 35
“Therefore, the adsorption potential theory is a more complete and mature theory to describe the gas adsorption in carbon micropores, and it mianly includes Dubinin-Astakhow (D-A) and DubininRadushkevich (D-R) equations, which are commonly used to explain isothermal adsorption behavior quantitatively (Ayawei et al., 20…”
BackgroundMethodInfluentialSupercritical fluid adsorption of natural extracts: Technical, practical, and theoretical aspects
Carvalho, V. S., Dias, A. L. B., Rodrigues, K. P., Hatami, T., Mei, L. H. I., Martínez, J., & Viganó, J. (2021) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2021.101865 · Cited by 35
Oyarce, E., Cantero-López, P., Yáñez, O., Roa, K., Boulett, A., Pizarro, G. D. C., Zhang, Y., Xu, C., Willför, S. M., & Sánchez, J. (2022) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2022.119089 · Cited by 35
Tekin, B., & Açıkel, Ü. (2022) · GAZI UNIVERSITY JOURNAL OF SCIENCE · doi:10.35378/gujs.1066137 · Cited by 35
“The adsorption isotherms generally inform necessary knowledge about adsorption type, energy, and capacity [16].”
BackgroundGowda, S. A. M., Goveas, L. C., & Dakshayini, K. (2022) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2022.126431 · Cited by 35
Boron removal by glucamine-functionalized inverse vulcanized sulfur polymer
Abbasi, A., Yahya, W. Z. N., Nasef, M. M., Moniruzzaman, M., Ghumman, A. S. M., & Afolabi, H. K. (2022) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2022.105311 · Cited by 35
PLANT EXTRACTS AS CORROSION INHIBITORS FOR ALUMINUM ALLOY IN NaCL ENVIRONMENT - RECENT REVIEW
Kumari, P. P., & Lavanya, M. (2022) · Journal of the Chilean Chemical Society · doi:10.4067/s0717-97072022000205490 · Cited by 35
“Temkin isotherm model considers the influence of indirect adsorbate/adsorbate interactions on the adsorption process; it is believed that the heat of adsorption of all molecules in the layer reduce linearly as a consequence of increased surface coverage [65].”
BackgroundRemoval of highly concentrated methylene blue dye by cellulose nanofiber biocomposites
Oyarce, E., Cantero-López, P., Roa, K., Boulett, A., Yáñez, O., Santander, P., Pizarro, G. D. C., & Sánchez, J. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.124045 · Cited by 35
Paranjape, P., & Sadgir, P. (2023) · Water Practice & Technology · doi:10.2166/wpt.2023.110 · Cited by 35
Ramanayaka, S., Vithanage, M. S., Zhang, H., & Semple, K. T. (2023) · Environmental Research · doi:10.1016/j.envres.2023.116725 · Cited by 35
Andrunik, M., Skalny, M., Gajewska, M., Marzec, M. M., & Bajda, T. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e20572 · Cited by 35
“The Halsey isotherm is the most suitable for defining heteroporous solids and may be used to evaluate adsorption on a surface where active sites are situated at relatively large distances from each other [91,92].”
BackgroundFliszár-Nyúl, E., Lemli, B., Kunsági‐Máté, S., Szente, L., & Poór, M. (2019) · Biomolecules · doi:10.3390/biom9090428 · Cited by 35
“Langmuir isotherm describes strictly homogenous monolayer adsorption, while Freundlich model does not have this restriction [58].”
BackgroundCesium ion-exchange resin using sodium dodecylbenzenesulfonate for binding to Prussian blue
Cho, E., Lee, J. J., Lee, B.-S., Lee, K.-W., Yeom, B., & Lee, T. S. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.125589 · Cited by 35
Adsorption of Pb(II) from aqueous solutions onto MgFeAl-CO3 LDH: thermodynamic and kinetic studies
Ichou, A. A., Benhiti, R., Abali, M., Dabagh, A., Chiban, M., Zerbet, M., Cârjă, G., & Sinan, F. (2020) · Desalination and Water Treatment · doi:10.5004/dwt.2020.24952 · Cited by 35
“Redlich–Peterson isotherm is widely used as a compromise between the Langmuir and Freundlich systems and which can be applied either homogeneous or heterogeneous systems due to its versatility; therefore the mechanism of adsorption is a mix and does not follow ideal monolayer adsorption [46,47].”
MethodJanuszewicz, K., Kazimierski, P., Cymann-Sachajdak, A., Hercel, P., Barczak, B., Wilamowska-Zawłocka, M., Kardaś, D., & Łuczak, J. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-28824-y · Cited by 34
Jarić, S., Kudriavtseva, A. S., Петрович, Н. Н., Орлов, А. В., Komarov, I. A., Barsukov, L. A., Gadjanski, I., Nikitin, P. I., & Bobrinetskiy, I. I. (2023) · Microchemical Journal · doi:10.1016/j.microc.2023.109611 · Cited by 34
“…isotherms was used to describe the Dirac point shift and change in transconductance including molecule-molecule interaction parameter x =0.1 (Ayawei et al., 2017; Brazesh et al., 2021): where Δ S -is a signal change ( S = Δ V g or Δ g m ), the constant S 0 represents non-specific adsorption…”
MethodInfluentialHydrogen adsorption on various transition metal (111) surfaces in water: a DFT forecast
Karimadom, B. R., Sermiagin, A., Meyerstein, D., Zidki, T., Mizrahi, A., Bar‐Ziv, R., & Kornweitz, H. (2024) · Physical Chemistry Chemical Physics · doi:10.1039/d3cp05884k · Cited by 34
Korkut, F., & Saloğlu, D. (2020) · Desalination and Water Treatment · doi:10.5004/dwt.2020.26305 · Cited by 34
“model parameters were obtained from the slope and intercept of the linearized isotherm plots [15,16].”
BackgroundMethodPerwitasari, D. S., Pracesa, Y. A. Y., Pangestu, M. A., & Tola, P. S. (2021) · Nusantara Science and Technology Proceedings · doi:10.11594/nstp.2021.1417 · Cited by 34
Abbas, A. H., Alsaheb, R. A. A., & Abdullah, J. K. (2022) · Petroleum · doi:10.1016/j.petlm.2022.01.007 · Cited by 34
Fe(III)–Chitosan Microbeads for Adsorptive Removal of Cr(VI) and Phosphate Ions
Tandekar, S., Pande, M. A., Shekhawat, A., Fosso‐Kankeu, E., Pandey, S., & Jugade, R. (2022) · Minerals · doi:10.3390/min12070874 · Cited by 34
A review of pine-based adsorbents for the adsorption of dyes
Ighalo, J. O., Zhou, Y., Zhou, Y., Igwegbe, C. A., Anastopoulos, I. P., Raji, M. A., & Iwuozor, K. O. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-91914-2.00013-1 · Cited by 34
Nindjio, G. F. K., Tagne, R. F. T., Jiokeng, S. L. Z., Fotsop, C. G., Bopda, A., Doungmo, G., Temgoua, R. C. T., Doench, I., Njoyim, E. T., Tamo, A. K., et al. (2022) · Polymers · doi:10.3390/polym14183776 · Cited by 34
Mensah, K., Samy, M., Mahmoud, H., Fujii, M., & Shokry, H. (2022) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-022-04646-2 · Cited by 34
“However, the heterogeneity of CP-600 surface energy was affirmed by the Toth parameter, nTH ≠ 1, and Radke-Prausnitz parameter, mP ≠ 0 (Ayawei et al. 2017; Al-Ghouti and Da’ana 2020).”
MethodEfficient Pb(II) adsorption in aqueous solution by hierarchical 3D/2D TiO2/CNNS nanocomposite
Modwi, A. K., Basith, N. M., Ghoniem, M. G., Ismail, M., Aissa, M. A. B., Khezami, L., & Bououdina, M. (2022) · Materials Science and Engineering B · doi:10.1016/j.mseb.2022.116191 · Cited by 34
Zeghioud, H., & Mouhamadou, S. (2023) · Water Air & Soil Pollution · doi:10.1007/s11270-023-06251-6 · Cited by 34
“The Temkin isotherm is valid only for an intermediate range of ion concentrations (Ayawei et al. 2017) and the low correlation coefficient means that other interactions take place for MB removal (P. Li et al. 2019).”
RetractedSharef, H. Y., Jalal, A. F., Ibrahim, B. M., Fakhre, N. A., & Qader, İ. N. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.124318 · Cited by 34
Nobakht, A., Jafari, D., & Esfandyari, M. (2023) · Environmental Monitoring and Assessment · doi:10.1007/s10661-023-11178-w · Cited by 34
“An isotherm model with its unique constants give valuable information about the surface properties and the adsorption capacity of the adsorbents (Ayawei et al., 2017).”
BackgroundSallam, S., Aljohani, M. M., Alatawi, N. M., Alsharief, H. H., Ibarhiam, S. F., Almahri, A., Alnoman, R. B., & El‐Metwaly, N. M. (2023) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2023.123667 · Cited by 34
Rahman, M. L., Wong, Z. J., Sarjadi, M. S., Abdullah, M. H., Heffernan, M. A., Sarkar, S. M., & O’Reilly, E. J. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49671 · Cited by 34
Potential of low-cost bio-adsorbents to retain amoxicillin in contaminated water
Cela-Dablanca, R., Barreiro, A., Rodríguez-López, L., Santás-Miguel, V., Arias‐Estévez, M., Núñez‐Delgado, A., Álvarez‐Rodríguez, E., & Fernández‐Sanjurjo, M. J. (2022) · Environmental Research · doi:10.1016/j.envres.2022.113621 · Cited by 33
Hussein, H., Ibrahim, S. S., & Khairy, S. A. (2024) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2024.106649 · Cited by 33
Milićević, S. Z., Vlahović, M. M., Kragović, M., Martinović, S. P., Milošević, V., Jovanović, I., & Stojmenović, M. D. (2020) · Minerals · doi:10.3390/min10090753 · Cited by 33
“This reduces the interspace between the particles, the fixed-bed becomes more compact and homogeneous, which results in a better and longer contact between the zeolite and the solution that needs to be purified [36].”
BackgroundWong, K. T., Wong, V.-L., & Lim, S. S. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01878-6 · Cited by 33
Ahmad, A. A., Ahmad, M. A., Yahaya, N. K. E. M., Din, A. T. M., & Yaakub, A. R. W. (2020) · Desalination and Water Treatment · doi:10.5004/dwt.2020.26067 · Cited by 33
Oribayo, O., Olaleye, O. O., Akinyanju, A. S., Omoloja, K. O., & Williams, S. O. (2021) · Nigerian Journal of Technology · doi:10.4314/njt.v39i4.14 · Cited by 33
“Langmuir [11, 12], Freundlich [11, 12], and Temkin [12, 13] isotherm models were used to fit the experimental isotherm data of Mb adsorption onto CSAC.”
MethodInfluentialSingh, S., Kaur, M., Bajwa, B. S., & Kaur, I. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2021.117061 · Cited by 33
Miranda, G. F., Chen, S., Neis, M., Zhou, L., Zhang, Y., Lo, Y., Tanner, J. A., Kreidenweiss, A., Offenhäusser, A., & Mayer, D. (2021) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2021.130812 · Cited by 33
Al-Jubouri, S. M., Al‐Batty, S., Ramsden, R., Tay, J., & Holmes, S. M. (2021) · Desalination and Water Treatment · doi:10.5004/dwt.2021.27707 · Cited by 33
“Also, linearizing the model equation influences the values of the model isotherm constants [40].”
BackgroundMethodResultInfluentialAsl, F. O., Zargar, G., Manshad, A. K., Iglauer, S., & Keshavarz, A. (2022) · Fuel · doi:10.1016/j.fuel.2022.123591 · Cited by 33
Asim, U., Husnain, S. M., Abbas, N., Shahzad, F., Zafar, S., Younis, S. A., & Kim, K. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.135088 · Cited by 33
Emecheta, E. E., Borda, D. B., Pfohl, P. M., Wohlleben, W., Hutzler, C., Haase, A., & Roloff, A. (2022) · Microplastics and Nanoplastics · doi:10.1186/s43591-022-00049-9 · Cited by 33
“the pseudo-first and pseudo-second-order models [62, 63], were both suitable to describe the observed sorption kinetics processes, with no significant difference (p < 0.”
MethodHydroxyapatite Nanopowders for Effective Removal of Strontium Ions from Aqueous Solutions
Predoi, S. A., Ciobanu, C. S., Chifiriuc, M. C., Motelica‐Heino, M., Predoi, D., & Iconaru, S. L. (2022) · Materials · doi:10.3390/ma16010229 · Cited by 33
“The kinetics involved in the adsorption processes of strontium ions by HAp nanoparticles were described using both Langmuir and Freundlich adsorption models [47,48].”
MethodKanmaz, N., Buğdaycı, M., & Demirçivi, P. (2023) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2023.121643 · Cited by 33
Gumilar, G., Chowdhury, S., Shukri, G., Patah, A., Nugraha, N., Henzie, J., Anshori, I., Kaneti, Y. V., & Yuliarto, B. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb00138e · Cited by 33
Fabrication of biogenic carbon-based materials from coconut husk for the eradication of dye
Chaudhary, S., Goyal, S., & Umar, A. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.139823 · Cited by 33
Nxumalo, N. L., & Mahlambi, P. N. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c02096 · Cited by 33
Verma, Y., Sharma, G., Kumar, A., Dhiman, P., Si, C., & Stadler, F. J. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.128640 · Cited by 33
Mahmoud, R., Kotb, N. M., GadelHak, Y., El‐Ela, F. I. A., Shehata, A. Z., Othman, S. I., Allam, A. A., Rudayni, H. A., & Zaher, A. (2024) · Scientific Reports · doi:10.1038/s41598-023-48382-0 · Cited by 33
Shirazian, S., Huynh, T., Pirestani, N., Soltani, R., Marjani, A., Albadarin, A. B., & Sarkar, S. M. (2024) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2024.03.030 · Cited by 33
Neolaka, Y. A. B., Baunsele, S. D., Nitbani, F. O., de Rozari, P., Widyaningrum, B. A., Lawa, Y., Amenaghawon, A. N., Darmokoesoemo, H., & Kusuma, H. S. (2024) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2024.101146 · Cited by 33
Sajan, M. K., Rahulan, K. M., Rajendran, A. S., & Flower, A. L. (2024) · Environmental Science and Pollution Research · doi:10.1007/s11356-024-33726-8 · Cited by 33
“The Temkin isotherm model is described by the mathematical expression(Ayawei et al. 2017): which is linearized as where A T is the Temkin isotherm equilibrium binding constant (L/mg), b T is the Temkin isotherm constant corresponding to heat of adsorption (J/mol), R is the universal gas constant…”
Niasar, H. S., Li, H., Das, S., Kasanneni, T. V. R., Ray, M. B., & Xu, C. C. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.01.051 · Cited by 33
Coffee Pulp: A Sustainable Alternative Removal of Cr (VI) in Wastewaters
Aguilar, D. L. G., Miranda, J. P. R., Esteban-Muñoz, J. A., & Peréz, J. F. B. (2019) · Processes · doi:10.3390/pr7070403 · Cited by 33
“To identify this parameter, three mathematical models were applied (Langmuir, Freundlich and Henry), being the linearized model of Langmuir the one that was most adjusted in the removal of Cr (VI), because this was the one that presented the highest correlation coefficient in comparison to the other two models [26], a…”
MethodAlabbad, E. A. (2021) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2021.103041 · Cited by 33
Characterization of Fe(III) Adsorption onto Zeolite and Bentonite
Bakalár, T., Kaňuchová, M., Girová, A., Pavolová, H., Hromada, R., & Hajduová, Z. (2020) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph17165718 · Cited by 32
“The most accurate fit is by Redlich-Peterson isotherm for adsorption onto Z-M20 and B-BR, which combines elements from both Langmuir and Freundlich equations; therefore, the mechanism of adsorption is a mix and does not follow ideal monolayer adsorption and is applicable in either homogenous or heterogeneous systems b…”
BackgroundSchertenleib, T., Karve, V. V., Stoian, D. C., Asgari, M., Trukhina, O. N., Oveisi, E., Mensi, M., & Queen, W. L. (2024) · Chemical Science · doi:10.1039/d4sc00174e · Cited by 32
“40,41 The increase in the value of both parameters suggests that the adsorbent has a higher a ffi nity to Pt and that the surface is becoming less homogenous in nature.”
BackgroundStudy of natural zeolites for hydrogen purification: CO2 adsorption capacity and kinetic mechanism
Maceiras, R., Feijoo, J., Pérez, L., Alfonsín, V., & Falcón, P. (2024) · Fuel · doi:10.1016/j.fuel.2024.132732 · Cited by 32
Ige, A. O., Ogunsile, B. O., Ore, O. T., & Olawade, D. B. (2024) · Discover Chemistry. · doi:10.1007/s44371-024-00010-0 · Cited by 32
Ali, A. A., & Abdul‐Hameed, H. M. (2024) · Desalination and Water Treatment · doi:10.1016/j.dwt.2024.100951 · Cited by 32
Molecularly imprinted cryogel beads for cholesterol removal from milk samples
Kartal, F., & Denizli, A. (2020) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2020.110860 · Cited by 32
Escobar, E. C., Sio, J. E. L., Bendoy, A. P., Torrejos, R. E. C., Fissaha, H. T., Kim, H., Chung, W., & Nisola, G. M. (2020) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2020.101716 · Cited by 32
Zheng, X., Qiu, C., Long, J., Jiao, A., Xu, X., Jin, Z., & Wang, J. (2021) · Food Bioscience · doi:10.1016/j.fbio.2021.101081 · Cited by 32
Nandiyanto, A. B. D., Hofifah, S. N., Inayah, H. T., Putri, S. R., Apriliani, S. S., Anggraeni, S. W., Usdiyana, D., Usdiyana, D., & Rahmat, A. (2021) · Iraqi Journal of Science · doi:10.24996/ijs.2021.62.5.2 · Cited by 32
“The model is used to calculate the heat of the sorption process [33].”
MethodFathollahi, A., & Coupe, S. J. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131152 · Cited by 32
Ibrahim, S. A., Hasan, M. B., Al-Tameemi, I. M., Ibrahim, T. A., & Abbas, M. N. (2021) · Innovative Infrastructure Solutions · doi:10.1007/s41062-021-00564-3 · Cited by 32
“One of the most applied tools for defining the best fitting adsorption models is linear regression analysis because it analyzes the adsorption system, quantifies the distribution of adsorbates, and verifies the consistency of theoretical assumptions of the adsorption isotherm model [52].”
MethodDependence of cationic dyes’ adsorption upon α-MoO3 structural properties
Kedves, E.-Z., Bárdos, E., Gyulavári, T., Pap, Z., Hernádi, K., & Baia, L. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.151584 · Cited by 32
Taha, G. M., Mansor, E. S., & Sultan, M. Z. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.11.018 · Cited by 32
Yukhajon, P., Somboon, T., & Sansuk, S. (2022) · Journal of Environmental Sciences · doi:10.1016/j.jes.2022.04.009 · Cited by 32
Cleanup of Cd II from water media using Y2O3@gC3N4 (YGCN) nanocomposite
Aldaghri, O. A., Modwi, A. K., Idriss, H., Ali, M. K. M., & Ibnaouf, K. H. (2022) · Diamond and Related Materials · doi:10.1016/j.diamond.2022.109315 · Cited by 32
Boulett, A., Roa, K., Oyarce, E., Xiao, L., Sun, R., Pizarro, G. D. C., & Sánchez, J. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.130359 · Cited by 32
Tajahmadi, S., Shamloo, A., Shojaei, A., & Sharifzadeh, M. S. (2022) · ACS Omega · doi:10.1021/acsomega.2c04800 · Cited by 32
Abdel‐Gaber, A. M., Ezzat, A., & Mohamed, M. E. (2022) · Scientific Reports · doi:10.1038/s41598-022-26757-z · Cited by 32
Mouhamadou, S., Dalhatou, S., Obada, D. O., Fryda, L. E., Mahieu, A., Bonnet, P., Caperaa, C., Kane, A., Massaï, H., & Zeghioud, H. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.109273 · Cited by 33
Pitruzzella, R., Arcadio, F., Perri, C., Prete, D. D., Porto, G., Zeni, L., & Cennamo, N. (2023) · Chemosensors · doi:10.3390/chemosensors11040211 · Cited by 33
Munawaroh, H. S. H., Anwar, B., Yuliani, G., Murni, I. C., Arindita, N. P. Y., Maulidah, G. S., Martha, L., Hidayati, N. A., Chew, K. W., & Show, P. L. (2023) · Bioengineered · doi:10.1080/21655979.2023.2252226 · Cited by 32
“The qmax represents the adsorption capacity, while the KL characterizes adsorption affinity of the adsorbent [41,42].”
BackgroundAerogels in wastewater treatment: A review
Garg, S., Singh, S., Shehata, N., Sharma, H., Samuel, J., Khan, N. A., Ramamurthy, P. C., Singh, J., Mubashir, M., Bokhari, A., et al. (2023) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2023.105299 · Cited by 32
Metadata
- Authors
- Ayawei, N., Ebelegi, A. N., & Wankasi, D.
- Affiliations
- Niger Delta University (NG)
- Corresponding author
- Ayawei, Nimibofa
- Venue
- Journal of Chemistry
- Publisher
- Wiley
- Published
- 2017
- Volume
- 2017
- Pages
- 1-11
- ISSN
- 2090-9063 (ISSN-L)
- 2090-9071
- OpenAlex
- W2752698709
- Cited by
- 2,957
- References
- 64
- Citations by year
- 2026: 290 · 2025: 355 · 2024: 427 · 2023: 474 · 2022: 545 · 2021: 406 · 2020: 301 · 2019: 116 · 2018: 42 · 2017: 1
- FWCI
- 67.13
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Journal of Chemistry (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Greater South Information System
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Physical Sciences › Environmental Science › Water Science and Technology › Coagulation and Flocculation Studies
- Keywords
- adsorption isotherms, linear regression, nonlinear regression, error function, low-cost adsorbent, adsorption mechanism
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.