Modelling and Interpretation of Adsorption Isotherms
Open accessThe DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Abstract
The need to design low-cost adsorbents for the detoxification of industrial effluents has been a growing concern for most environmental researchers. So modelling of experimental data from adsorption processes is a very important means of predicting the mechanisms of various adsorption systems. Therefore, this paper presents an overall review of the applications of adsorption isotherms, the use of linear regression analysis, nonlinear regression analysis, and error functions for optimum adsorption data analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The Langmuir isotherm is used when the adsorption process is monolayered with a fixed number of sites [16].”
From Adsorption of toxic metals from greywater using coconut husk biochar and spent green tea (2024) · cites this paper as [16]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728 · cited 1×
“The average relative error was developed byMarquardt [86] with the aim ofminimizing the fractional error distribution across the entire concentration range.”
MethodInsights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479 · cited 2×
“Harkin-Jura isotherm model assumes the possibility of multilayer adsorption on the surface of absorbents having heterogeneous pore distribution [32].”
BackgroundMethodOn the Structure of a Catalyst Surface
Sips, R. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746922 · Cited by 3,650 · cited 1×
“This isotherm model has a linear dependence on concentration in the numerator and an exponential function in the denomination which altogether represent adsorption equilibrium over a wide range of concentration of adsorbate which is applicable in either homogenous or heterogeneous systems because of its versatility [4…”
BackgroundRedlich, O., & Peterson, D. L. (1959) · The Journal of Physical Chemistry · doi:10.1021/j150576a611 · Cited by 2,607
Pore and solid diffusion models for fixed‐bed adsorbers
Weber, T. W., & Chakravorti, R. K. (1974) · AIChE Journal · doi:10.1002/aic.690200204 · Cited by 2,573 · cited 1×
“The Kiselev adsorption isotherm equation also known as localized monomolecular layer model [38] is only valid for surface coverage θ > 0.”
BackgroundAdsorption — from theory to practice
Dąbrowski, A. (2001) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(00)00082-8 · Cited by 2,375
Kinetics and thermodynamics of cadmium ion removal by adsorption onto nano zerovalent iron particles
Boparai, H. K., Joseph, M., & O’Carroll, D. M. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.11.029 · Cited by 1,561 · cited 2×
“The linear form of the Freundlich isotherm is as follows [17]:”
BackgroundMethodHo, Y.-S. (2006) · Water Research · doi:10.1016/j.watres.2005.10.040 · Cited by 1,325
Günay, A., Arslankaya, E., & Tosun, İ. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.12.034 · Cited by 1,122 · cited 2×
“A distinguishing feature of theDubinin-Radushkevich isotherm is the fact that it is temperature dependent; hence when adsorption data at different temperatures are plotted as a function of logarithm of amount adsorbed versus the square of potential energy, all suitable data can be obtained [13].”
BackgroundHAMDAOUI, O., & NAFFRECHOUX, E. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.021 · Cited by 1,013 · cited 2×
“Hamdaoui and Naffrechoux used the Flory-Huggins isothermmodel in their study of the biosorption of Zinc from aqueous solution using coconut coir dust [29].”
BackgroundMethod
Research works printed but not linked: 25
- N. Ayawei, M. Horsfall Jnr, and I. Spiff, "Rhizophora mangle waste as adsorbent for metal ions removal from aqueous solu- tion, " European Journal of Scientic Research, vol. 9, no. 1, p. 21, 2005.
- J. H. De Boer, The Dynamical Character of Adsorption, Oxford University Press, Oxford, England, 1953.
- P. S. Kumara, S. Ramalingamb, S. D. Kiruphac, A. Murugesanc, and S. Vidhyarevicsivanesam, "Adsorption behaviour of Nickel (II) onto cashew nut shell, " in Equilibrium, Thermodynamics, Kinetics, Mechanism and Process design. Chemical Engineering Journal, vol. 1169, pp. 122-131, Adsorption behaviour of Nickel (II) onto cashew nut shell, Equilibrium, 2010.
- P. Sampranpiboon, P. Charnkeitkong, and X. Feng, "Equilib- rium isotherm models for adsorption of zinc (II) ion from aqueous solution on pulp waste, " WSEAS Transactions on Environment and Development, vol. 10, pp. 35-47, 2014.
- U. Israel and U. M. Eduok, "Biosorption of zinc from aqueous solution using coconut (Cocos nuciferaL) coirdust, " Archives of Applied Science Research, vol. 4, pp. 809-819, 2012.
- H. Shahbeig, N. Bagheri, S. A. Ghorbanian, A. Hallajisani, and S. Poorkarimi, "A new adsorption isotherm model of aqueous solutions on granular activated carbon, " World Journal of Mod- elling and Simulation, vol. 9, no. 4, pp. 243-254, 2013.
- N. A. Ebelegi, S. S. Angaye, N. Ayawei, and D. Wankasi, "Removal of congo red from aqueous solutions using fly ash modified with hydrochloric acid, " British Journal of Applied Sci- ence and Technology, vol. 20, no. 4, pp. 1-7, 2017.
- F. Rania and N. S. Yousef, "Equilibrium and Kinetics studies of adsorption of copper (II) on natural Biosorbent, " International Journal of Chemical/Engineering and Applications, vol. 6, no. 5, 2015.
- R. H. Fowler and E. A. Guggenheim, Statistical Thermodynam- ics, Cambridge University Press, London, England, 1939.
- S. K. Knaebel, "Adsorbent selection, " International Journal of Trend in Research and Development, Adsorption Research, Incorporated Dublin, Ohio. 43016, 2004.
- A. V. C. Kiseler, "vapour adsorption in the formation of adsor- bate Mollecule Complexes on the surface, " Kolloid Zhur, vol. 20, pp. 338-348, 1958.
- M. Gubernak, W. Zapała, and K. Kaczmarski, "Analysis of amyl- benzene adsorption equilibria on an RP-18e chromatographic column, " Acta Chromatographica, no. 13, pp. 38-59, 2003.
- A. Achmad, J. Kassim, T. K. Suan, R. C. Amat, and T. L. Seey, "Equilibrium, kinetic and thermodynamic studies on the adsorption of direct dye onto a novel green adsorbent developed from Uncaria gambir extract, " Journal of Physical Science, vol. 23, no. 1, pp. 1-13, 2012.
- A. A. Israel, O. Okon, S. Umoren, and U. Eduok, "Kinetic and equilibrium studies of adsorption of lead (II) Ions from aqueous solution using coir dust (Cocos nucifera L) and it's modified extract resins, " The Holistic Approach to Environment, 2013.
- J. Toth, "State equation of the solid gas interface layer, " Acta Chimica (Academiae Scientiarum) Hungaricae, vol. 69, pp. 311- 317, 1971.
- T. Jafari Behbahani and Z. Jafari Behbahani, "A new study on asphaltene adsorption in porous media, " Petroleum and Coal, vol. 56, no. 5, pp. 459-466, 2014.
- T. Benzaoui, A. Selatnia, and D. Djabali, "Adsorption of copper (II) ions from aqueous solution using bottom ash of expired drugs incineration, " Adsorption Science and Technology, pp. 1- 16, 2017.
- O. Amrhar and M. S. NassaliElyoubi, "Two and three-parameter isothermal modeling for adsorption of Crystal Violet dye onto Natural Illitic Clay: nonlinear regression analysis, " Journal of Chemical and Pharmaceutical Research, vol. 7, no. 9, pp. 892- 903, 2015.
- O. Amrhar, H. Nassai, and M. S. Elyoubi, "Application of non- linear regression analysis to select the optimum absorption isotherm for Methylene Blue adsorption onto Natural Illitic Clay, " Bulletia de la societe Royale des Science de Kiege, vol. 84, pp. 116-130, 2015.
- G. Varank, A. Demir, K. YetiImezsoy, S. Top, E. Sekman, and M. S. Bilgili, "Removal of 4-nitrophenol from aqueous solution by natural low cost adsorbents, " Indian Journal of Chemical Technology, vol. 19, pp. 7-25, 2011.
- S. A. Al-Jlil and M. S. Latif, "Evaluation of Equilibrium iso- therms models for the adsorption of Cu and Ni from wastewater on Benronite clay, " Material and Technology, vol. 47, no. 4, pp. 481-486, 2013.
- M. F. Dilekoglu, "Use of generic algorithm optimzation Tech- niques in the adsorption of phenol on Banana and grapetruit peels, " Journal of the Chemical Society of Pakistan, vol. 38, no. 6, 2016.
- N. Singh and C. Balomajumder, "Removal of cyanide from aqueous media by adsorption using Al-activated carbon: para- metric experiments equilibrium, kinetics and thermodynamic analysis, " in Proceedings of the 2nd International Conference on Science, Technology and Management, University of Delhi, New Delhi, India, 2015.
- K. Vijayaraghavan, "Biosorption of Lan thamide (preseo- dymium) using ulva lactuca: mechanistic study and application of two, three, four and five parameter isotherm models, " Journal of Environment and Biotechnology Research, vol. 1, no. 1, pp. 1-8, 2015.
- C. Chen, "Evaluation of equilibrium sorption isotherm equa- tions, " Open Chemical Engineering Journal, vol. 7, pp. 24-44, 2003.
Cited by
Items 701–800 of 1,006
Sharifzadeh, Z., Razavi, S. A. A., & Morsali, A. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c15863 · Cited by 32
Environmental benefits of Agricultural Waste-Derived catalysts in diesel Desulfurization: A review
Mohammed, A. E., Mohammed, W. T., & Gheni, S. A. (2024) · Cleaner Materials · doi:10.1016/j.clema.2024.100262 · Cited by 32
Adsorptive Remediation of Congo Red Dye in Aqueous Solutions Using Acid Pretreated Sugarcane Bagasse
Said, A. E. A., Aly, A. A. M., Goda, M. N., El–Aal, M. A., & Abdelazim, M. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01665-3 · Cited by 32
Allura Red dye sorption onto electrospun zirconia nanofibers
Ávila-Martínez, A. K., Roque-Ruiz, J. H., Torres-Pérez, J., Medellín-Castillo, N. A., & López, S. Y. R. (2020) · Environmental Technology & Innovation · doi:10.1016/j.eti.2020.100760 · Cited by 32
Alkali/zinc-activated fly ash nanocomposites for dye removal and antibacterial applications
Rodwihok, C., Suwannakeaw, M., Charoensri, K., Wongratanaphisan, D., Woo, S. W., & Kim, H. S. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.125060 · Cited by 34
Chitosan–Silica Composite Aerogel for the Adsorption of Cupric Ions
Vareda, J. P., Matias, P. M. C., Paixão, J. A., Murtinho, D., Valente, A. J. M., & Durães, L. M. R. (2024) · Gels · doi:10.3390/gels10030192 · Cited by 31
Ismail, U. M., Ibrahim, A. I., Onaizi, S. A., & Vohra, M. S. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.102991 · Cited by 31
Yang, L., Zhan, Z., Zhao, L., Zhang, C., Wang, S., Hu, W. G., & Zhu, G. (2024) · Chemical Science · doi:10.1039/d4sc05329j · Cited by 31
“39 Based on the Langmuir adsorption equation, the theoretical maximum adsorption capacities for RhB, MB, TC, and CIP are calculated to be 1075 mg g − 1 , 1020 mg g − 1 , 826 mg g − 1 , and 1134 mg g − 1 , respectively (Table S5 † ).”
Adsorption Behaviour of Hazardous Dye (Methyl Orange) on Cellulose-Acetate Polyurethane Sheets
Iqhrammullah, M., Marlina, M., & Nur, S. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/845/1/012035 · Cited by 31
Yetilmezsoy, K., Özçimen, D. B., Koçer, A. T., Bahramian, M., Kıyan, E., Akbin, H. M., & Goncaloğlu, B. İ. (2020) · International Journal of Environmental Research · doi:10.1007/s41742-020-00275-0 · Cited by 31
Mass transfer from a fluid flowing through a porous media
Myers, T. G., & Font, F. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120374 · Cited by 31
“The form of q∗ is also the subject of numerous studies, see the review of [2].”
BackgroundDrăgan, E. S., Humelnicu, D., Ignat, M., & Varganici, C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c10983 · Cited by 31
Memon, A. Q., Ahmed, S., Bhatti, Z. A., Maitlo, G., Shah, A. K., Mazari, S. A., Muhammad, A., Jatoi, A. S., & Kandhro, G. A. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-11208-x · Cited by 31
“To evaluate the overall experimental adsorption process, isotherm modeling is an essential technique to predict the sorption capacity and to design an adsorption system for wastewater treatment (Ayawei et al. 2017).”
MethodAl-Ghouti, M. A., Khan, M., Nasser, M. S., Saad, K. A., & Heng, O. E. (2020) · PLoS ONE · doi:10.1371/journal.pone.0239095 · Cited by 31
“Dubinin-Radushkevich isotherm [69] lnqe = qs−KDRε2 KDR is the Dubinin Radushkevich isotherm constant (mol(2)/kJ(2)), qs is the theoretical isotherm saturation capacity (mg/g) and qe is the amount of adsorbate in the adsorbent at equilibrium (mg/ g), ε = RT ln[1+1/Ce].”
BackgroundColor removal from model dye effluent using PVA-GA hydrogel beads
Jain, P., Sahoo, K., Mahiya, L., Ojha, H., Trivedi, H., Parmar, A. S., & Kumar, M. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.111797 · Cited by 31
Howell, N. L., Pimentel, A., & Bhattacharia, S. K. (2021) · Environmental Challenges · doi:10.1016/j.envc.2021.100137 · Cited by 32
Azeez, M. O., Tanimu, A., Alhooshani, K. R., & Ganiyu, S. A. (2021) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2021.103454 · Cited by 31
“The Freundlich explains explain the surface heterogeneity or multilayer sorption, exponential distribution of active sites as well as their energies (Ayawei et al. 2017).”
BackgroundAmola, L. A., Kamgaing, T., Tagne, R. F. T., Atemkeng, C. D., Kuete, I.-H. T., & Anagho, S. G. (2022) · Journal of Chemistry · doi:10.1155/2022/1125877 · Cited by 31
“e values of the constant nH of the Hill model different from 1 highlight a localized adsorption [38] with formation of a bond between the molecules of HQ or R and that of carbon.”
BackgroundPesticide elimination through adsorption by metal-organic framework and their modified forms
Lunardi, V. B., Soetaredjo, F. E., Foe, K., Putro, J. N., Santoso, S. P., Wenten, I. G., Irawaty, W., Yuliana, M., Ju, Y., Angkawijaya, A. E., et al. (2022) · Environmental Nanotechnology Monitoring & Management · doi:10.1016/j.enmm.2021.100638 · Cited by 31
Li, J., Liao, L., Jia, Y., Tian, T., Gao, S., Zhang, C., Shen, W., & Wang, Z. (2022) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2022.104119 · Cited by 31
One-step synthesis of magnetic fly ash composites for methylene blue removal: batch and column study
Ahmed, F. S., Alsaffar, M. A., & AbdulRazak, A. A. (2022) · Environmental Science and Pollution Research · doi:10.1007/s11356-022-23491-x · Cited by 31
“For the nonlinear equation, Ayawei et al. (2017) have used the Langmuir isotherm model: where q m is the “Langmuir constants related to the maximum capacity of adsorption (mg/g)”, and K L is the “constant that denotes the adsorption energy (L/mg)”.”
Yadav, N. S., Singh, S. P., Saini, O., & Srivastava, S. (2022) · Environmental Nanotechnology Monitoring & Management · doi:10.1016/j.enmm.2022.100757 · Cited by 31
Trần, Q. T., Do, T. H., Ha, X. L., Duong, T. T. A., Chu, M. N., Vu, V. N., Chau, H. D., Tran, T. K. N., & Song, P. (2022) · Materials · doi:10.3390/ma15238566 · Cited by 31
“Tempkin Isotherm Adsorption Model The Tempkin adsorption isotherm is represented by the following equation [33]:”
BackgroundMethodInfluentialKaruppaiyan, J., Mullaimalar, A., & Jeyalakshmi, R. (2022) · Environmental Research · doi:10.1016/j.envres.2022.115002 · Cited by 31
RetractedMudhoo, A., & Pittman, C. U. (2023) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2023.02.033 · Cited by 31
Billah, R. E. K., Şimşek, S., Majdoubi, H., Kaya, S., Agunaou, M., Soufiane, A., & Katin, K. P. (2023) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2023.122872 · Cited by 31
Mid-temperature CO 2 Adsorption over Different Alkaline Sorbents Dispersed over Mesoporous Al 2 O 3
Tsiotsias, A. I., Georgiadis, A. G., Charisiou, N. D., Hussien, A. G. S., Dabbawala, A. A., Polychronopoulou, K., & Goula, M. A. (2024) · ACS Omega · doi:10.1021/acsomega.3c07204 · Cited by 31
Fard, N. T., Panahi, H. A., Moniri, E., & Soltani, E. R. (2024) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2024.124393 · Cited by 31
Murthy, T. P. K., Gowrishankar, B. S., Krishna, R. H., Chandraprabha, M. N., & Rao, R. S. (2019) · Materials Research Express · doi:10.1088/2053-1591/aafe3f · Cited by 31
Bullen, J. C., Kenney, J. P. L., Fearn, S., Kafizas, A., Skinner, S. J., & Weiss, D. J. (2020) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.06.119 · Cited by 31
Russakova, A. V., Altynbaeva, L. S., Barsbay, M., Zheltov, D. A., Zdorovets, M. V., & Mashentseva, A. A. (2021) · Membranes · doi:10.3390/membranes11020116 · Cited by 31
“Correct understanding and interpretation of adsorption isotherms are essential for the improvement of adsorption pathways and an efficient sorption system design [12,60].”
BackgroundNegm, N. A. M., Altalhi, A. A., Ahmed, H. M., & Mohamed, E. A. (2024) · Scientific Reports · doi:10.1038/s41598-024-77569-2 · Cited by 30
Zahedifar, M., & Moosavi, A. A. (2019) · Archives of Agronomy and Soil Science · doi:10.1080/03650340.2019.1694145 · Cited by 30
Oliveira, M. R. F., Abreu, K. D. V., Romão, A. L. E., Davi, D. M. B., Magalhães, C. E. D. C., Carrilho, E. N. V. M., & Alves, C. R. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-07635-5 · Cited by 30
Kani, A. N., Dovi, E., Mpatani, F. M., Li, Z., Han, R., & Qu, L. (2020) · Desalination and Water Treatment · doi:10.5004/dwt.2020.25735 · Cited by 30
“Temkin model was not a good fit from the experimental data, the heat of adsorption was not linear hence and the rising temperature was not beneficial for MB adsorption.”
BackgroundMethodInfluentialProtonic Titanate Nanotube–Reduced Graphene Oxide Composites for Hydrogen Sensing
Yadav, S., Nair, A., Kusuma Urs, M. B., & Kamble, V. B. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c02077 · Cited by 30
Njoku, C. B., Oseghe, E. O., & Msagati, T. A. M. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2021.118232 · Cited by 30
Sosun, Ali, A., Mannan, A., Shah, U. A., & Zia, M. (2022) · Applied Water Science · doi:10.1007/s13201-022-01588-5 · Cited by 30
“The Freundlich isotherm suggests adsorption phenomena to occur on heterogeneous surfaces (Ayawei et al. 2017).”
BackgroundChimanlal, I., Lesaoana, M., & Richards, H. L. (2022) · Minerals Engineering · doi:10.1016/j.mineng.2022.107663 · Cited by 30
Basnet, P., Ojha, P. K., Gyawali, D., Ghimire, K. N., & Paudyal, H. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e10305 · Cited by 30
“The equations that described the expression of nonlinear and linear forms of the Freundlich isotherm are represented by equations (15) and (16) [38, 39].”
BackgroundMethodInfluentialMedium-independent hydrogen atom binding isotherms of nickel oxide electrodes
Noh, H., & Mayer, J. M. (2022) · Chem · doi:10.1016/j.chempr.2022.08.018 · Cited by 30
Said, R. B., Rahali, S., Aissa, M. A. B., Albadri, A. E. A. E., & Modwi, A. K. (2023) · Inorganics · doi:10.3390/inorganics11010044 · Cited by 30
Facile preparation of maghemite based on iron sludge for arsenic removal from water
Zeng, H., Zhao, W., Sun, S., Sun, X., Zeng, Y., Hao, R., Zhang, J., & Li, D. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.167575 · Cited by 30
Sodium bicarbonate-hydroxyapatite used for removal of lead ions from aqueous solution
Predoi, S. A., Ciobanu, C. S., Chifiriuc, M. C., Iconaru, S. L., Predoi, D., Negrila, C. C., Marinaș, I. C., Raaen, S., Rokosz, K., & Motelica‐Heino, M. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.10.273 · Cited by 30
“%) of approximately 92% when the initial Pb 2 + concentration was over 50 mg/L. Information about the mechanism involved in the adsorption processes of lead ions using HAp-SB nanoparticles were illustrated with the aid of Langmuir and Freundlich adsorption models [47,48].”
Zhu, Y., Ding, R. F., Chen, S., Qu, X., Yang, Y., & Zhang, X. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.125857 · Cited by 30
Rehman, H., Javed, T., Thumma, A., Uddin, A. N., Singh, N., Baig, M. M., Taj, M. B., Shahzad, M. A., Ayub, M. A., Wasim, M., et al. (2024) · Desalination and Water Treatment · doi:10.1016/j.dwt.2024.100319 · Cited by 30
Nejad, M. S., Nejad, H. S., Sheibani, H., & Heydari, A. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01701-2 · Cited by 30
“After obtaining the adsorption data especially qe from the above equations their compliance with the three Langmuir, Freundlich and Temkin isotherm models were evaluated which their mathematical equations are defined in Eqs 4, 5 and 6, respectively [42, 43].”
MethodBisphenol A Removal by Adsorption Using Waste Biomass: Isotherm and Kinetic Studies
(2020) · Biointerface Research in Applied Chemistry · doi:10.33263/briac111.84678481 · Cited by 30
“This model also reveals that once the active adsorbent site is completely filled with the adsorbate, the adsorption process would stop at that site [35-37].”
BackgroundKurczewska, J., Stachowiak, M., & Cegłowski, M. (2024) · Environmental Research · doi:10.1016/j.envres.2024.119924 · Cited by 29
Adsorption of Cu(II) and Pb(II) in Aqueous Solution by Biochar Composites
Wang, X., Wang, X., Chen, W., Yuan, J., & Zhang, Q. (2025) · ACS Omega · doi:10.1021/acsomega.4c06837 · Cited by 29
Zhang, J., Peng, Y., Wang, C., Zhang, W., & Luo, X. (2025) · Minerals Engineering · doi:10.1016/j.mineng.2025.109713 · Cited by 30
Ferreiro, C., Villota, N., Lombraña, J. I., Rivero, M. J., Zúñiga, V., & Rituerto, J. M. (2019) · Water · doi:10.3390/w11020337 · Cited by 29
“This model assumes that adsorption sites increase exponentially with adsorption, implying a multilayer adsorption [41,42].”
BackgroundKaur, B., Gupta, R. K., & Bhunia, H. (2019) · Chemical Engineering Communications · doi:10.1080/00986445.2019.1635466 · Cited by 29
“In an unsteady process, equilibrium stage is reached when the gas (adsorbate) concentration in the bulk phase is in dynamic equilibrium with the solid/gas interface concentration (Ayawei et al., 2017).”
BackgroundSiraorarnroj, S., Kaewtrakulchai, N., Fuji, M., & Eiad‐ua, A. (2021) · Materialia · doi:10.1016/j.mtla.2021.101288 · Cited by 29
Villabona-Ortíz, Á., González-Delgado, Á. D., & Tejada-Tovar, C. (2022) · Water · doi:10.3390/w14060844 · Cited by 29
Methacrylate-Based Polymeric Sorbents for Recovery of Metals from Aqueous Solutions
Nastasović, A. B., Marković, B. M., Suručić, L. T., & Onjia, A. E. (2022) · Metals · doi:10.3390/met12050814 · Cited by 29
“For a single-component system, the most commonly used are two parameters, Langmuir, Freundlich, and Temkin isotherm models, or three-parameters Redlich–Peterson, Sips, and Toth isotherms [70].”
BackgroundMethodInfluentialSaner, A., Carvalho, P. N., Catalano, J., & Anastasakis, K. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.156418 · Cited by 29
Mashentseva, A. A., Aimanova, N. A., Parmanbek, N., Temirgaziev, B. S., Barsbay, M., & Zdorovets, M. V. (2022) · Nanomaterials · doi:10.3390/nano12193293 · Cited by 29
“The correct understanding and interpretation of adsorption isotherms is a key step for the development of new types of effective adsorbents [70].”
BackgroundIntegrated Adsorption–Photodegradation of Organic Pollutants by Carbon Xerogel/Titania Composites
Safri, A., Fletcher, A. J., Safri, R., & Rasheed, H. (2022) · Molecules · doi:10.3390/molecules27238483 · Cited by 29
“The Langmuir isotherm model is relevant for the prediction of monolayer adsorption on energetically uniform homogenous adsorption sites, whereas the Freundlich isotherm model predicts multilayer adsorption [28].”
BackgroundKarunakaran, K., Usman, M., & Sillanpää, M. E. T. (2022) · Sustainability · doi:10.3390/su142416927 · Cited by 29
“…isotherm, Langmuir–Freundlich isotherm, and Jossens isotherm), four-parameter isotherms (Fritz–Schlunder isotherm, Baudu isotherm, Weber–Van Vliet isotherm, and Marczewski–Jaroniec isotherm), and five-parameter isotherms (Fritz and Schlunder derivation which approaches the Langmuir model) [105].”
Influence of flake size and electrolyte conditions on graphene oxide adsorption of ionic dyes
Exley, J. M., Hunter, T. N., Pugh, T., & Tillotson, M. R. (2023) · Powder Technology · doi:10.1016/j.powtec.2023.118387 · Cited by 30
Shariati, A., Ebrahimi, T., Babadinia, P., Shariati, F. S., & Cohan, R. A. (2023) · Scientific Reports · doi:10.1038/s41598-023-31252-0 · Cited by 29
Menezes, T. R., Santos, K. M. C., Mao, H., Santos, K. S., de Conto, J. F., Reimer, J. A., Dariva, S. M. E., & Santana, C. C. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.129033 · Cited by 29
Mohamed, S. K., Alazhary, A. M., Al‐Zaqri, N., Alsalme, A., Alharthi, F. A., & Hamdy, M. S. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.11.187 · Cited by 29
Warshagha, M. Z. A., & Muneer, M. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c01055 · Cited by 29
Bolaños, K., Célis, F., Garrido, C., Campos, M., Guzmán, F., Kogan, M. J., & Araya, E. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb01246g · Cited by 29
Ramos, Q., Armienta, M. A., Aguayo, A., & Cruz, O. (2021) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2020.111843 · Cited by 29
Vicente-Martínez, Y., Garratón, M. C., Soto-Meca, A., Martín-Pereira, M. Á., & García-Onsurbe, M. D. C. (2021) · Water · doi:10.3390/w13131757 · Cited by 29
“Freundlich equation is [53]: q = K C (5) where K and 1/n are known as the adsorption capacity and the adsorption intensity constants, respectively.”
BackgroundAkkurt, Ş., Oguz, M. T., & Uçkun, A. A. (2022) · World Journal of Microbiology and Biotechnology · doi:10.1007/s11274-022-03235-2 · Cited by 29
Karadeniz, S. C., Uğraşkan, V., Işık, B., & Çakar, F. (2023) · Colloid & Polymer Science · doi:10.1007/s00396-023-05141-x · Cited by 28
“This isotherm assumes that the surface heterogeneity and energy of active sites are distributed exponentially [46].”
BackgroundDeb, H., Hasan, K., Islam, M. Z., Lv, K., Yang, S., Zhang, Y., & Yao, J. (2023) · Applied Sciences · doi:10.3390/app13148106 · Cited by 28
“To analyze the errors, a number of mathematically rigorous equations are used [28,29].”
MethodZardari, Z. H., Mohshim, D. F., Sarmadivaleh, M., Yusof, M. A. M., & Aftab, A. (2024) · ACS Omega · doi:10.1021/acsomega.4c04324 · Cited by 28
“76 Equation 11 presents the Langmuir linear form: where C e is the equilibrium concentration in (mg/g), K L is the Langmuir constant in (mg/g), q m is maximum adsopriton and q e is adsoprtion capacity.”
Yaffar, D., Brenner, J., Walker, A. P., Craig, M. E., Vaughan, E., Marín-Spiotta, E., Matos, M., Ríos, S., & Mayes, M. A. (2025) · Biogeochemistry · doi:10.1007/s10533-025-01218-7 · Cited by 28
“From the existing ca. 30 isotherm equations for determining sorption of any ion (Ayawei et al. 2017; Wang and Guo 2020; Tonk et al. 2022), only the Langmuir and the Freundlich equations and more recently the Temkin equation (Barrow 2008) have been widely used in the literature for soil P sorption.”
Bellaj, M., Rakcho, Y., Regti, A., Gebrati, L., Abouliatim, Y., Haddad, M. E., & Abourriche, A. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.151758 · Cited by 28
Lee, S. Y., Shim, H. E., Yang, J. E., Choi, Y. J., & Jeon, J. (2019) · Nanomaterials · doi:10.3390/nano9081164 · Cited by 28
“This result suggests that the adsorption of EB by the Fe-DC is monolayer adsorption [28].”
BackgroundZia‐ur‐Rehman, M., Aslam, Z., SHAWABKEH, R. A., Hussein, I. A., & Mahmood, N. (2020) · Water Science & Technology · doi:10.2166/wst.2020.119 · Cited by 28
Phenol Red Adsorption from Aqueous Solution on the Modified Bentonite
Linh, N. L. M., Dương, T., Đức, H. V., Thư, N. T. A., Liệu, P. K., Hùng, N. V., Hoa, L. T., & Khieu, D. Q. (2020) · Journal of Chemistry · doi:10.1155/2020/1504805 · Cited by 28
“,e linear form of the Dubinin–Radushkevich isotherm [28] is given by”
BackgroundCationic and Anionic Dye Adsorption on a Natural Clayey Composite
Márquez, C. O., García, V. J., Guaypatin, J. R., Fernández-Martínez, F., & Ríos, A. C. (2021) · Applied Sciences · doi:10.3390/app11115127 · Cited by 28
“In agreement with the Temkin model, the adsorption of ADY molecules on the KPs causes a linear decrease in adsorption heat (∆H) [57].”
MethodMohos, V., Faisal, Z., Fliszár-Nyúl, E., Szente, L., & Poór, M. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-15628-1 · Cited by 28
Yang, C.-Y., Kao, C.-L., & Hung, P.-Y. (2021) · Carbon letters · doi:10.1007/s42823-021-00275-w · Cited by 28
Enhanced oil recovery using surfactants
Khandoozi, S., Sharifi, A., & Riazi, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821931-7.00007-9 · Cited by 28
Licato, J., Foster, G. D., & Huff, T. B. (2022) · ACS ES&T Water · doi:10.1021/acsestwater.2c00024 · Cited by 28
Blanchard, R., & Mekonnen, T. H. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.108810 · Cited by 29
Thallium separation from wastewater using α-FeOOH@Biochar: Efficacy and mechanism
Liu, J., Liu, Y., Shen, Y., Wei, X., Yuan, W., Qi, J., Cao, J., Deng, P., Hu, H., Wang, L., et al. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.122532 · Cited by 28
Chatterjee, S., Mahanty, S., Das, P., Chaudhuri, P., & Das, S. (2022) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2022.103325 · Cited by 28
Shaba, E. Y., Tijani, J. O., Jacob, J. O., & Suleiman, M. A. T. (2022) · Journal of Environmental Science and Health Part A · doi:10.1080/10934529.2022.2162794 · Cited by 28
Anand, S., Singh, A., & Kumar, V. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-022-25065-3 · Cited by 28
Potentials of algae-based activated carbon for the treatment of M.orange in wastewater
Husien, S., El-taweel, R. M., Mohamed, N., Abdel-Aziz, A. B., Alrefaey, K. A., Elshabrawey, S. O., Mostafa, N. G., Said, L. A., Fahim, I. S., & Radwan, A. G. (2023) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2023.100330 · Cited by 28
Liu, Y., Yuan, W., Lin, W., Yu, S., Zhou, L., Zeng, Q., Wang, J., Tao, L., Dai, Q., & Liu, J. (2023) · Environmental Pollution · doi:10.1016/j.envpol.2023.122262 · Cited by 28
Grefa, D. D. A., Sánchez, J. E. G., Sánchez, L. R. B., Alfonso, M. S. P., & Tagle, M. E. V. (2023) · Microchemical Journal · doi:10.1016/j.microc.2023.109361 · Cited by 28
Advancement of Plant Extract/Ionic Liquid-Based Green Corrosion Inhibitor
Zunita, M., & Rahmi, V. A. (2023) · Chemistry Africa · doi:10.1007/s42250-023-00782-5 · Cited by 28
“The important piece of information about adsorption is the adsorption equilibrium, which is the quantity of pure component in the system that the adsorbent can hold [197–199].”
Díaz‐Uribe, C., Ortiz, J., Duran, F., Vallejo, W., & Fals, J. (2023) · ChemEngineering · doi:10.3390/chemengineering7060114 · Cited by 28
“…1/n ) and n are Freundlich constants, and C e (mg/L) is the equilibrium concentration of MO. Finally, we applied the Temkin isothermal model [62]: where b T is the Temkin constant, which is related to the heat of sorption (J/mol), A T is the equilibrium binding constant (L/mg), T is the…”
MethodSharma, A., Shivanna, J. M., Alodhayb, A. N., & Hegde, G. (2024) · Nanoscale Advances · doi:10.1039/d4na00254g · Cited by 28
Maghsoudi, H., Abdi, H., & Aidani, A. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05451 · Cited by 28
Kusiak‐Nejman, E., Sienkiewicz, A., Wanag, A., Rokicka-Konieczna, P., & Morawski, A. W. (2021) · Catalysts · doi:10.3390/catal11020172 · Cited by 28
“It was found that the Langmuir and Langmuir–Freundlich isotherm models, due to their highest fit, best describe the adsorption of methylene blue on the surface of the examined APTES-modified photocatalysts, while for the Orange II adsorption process, the best fit was found for Freundlich and Langmuir–Freundlich isothe…”
BackgroundMethodInfluentialElectro-reversible adsorption as a versatile tool for the removal of diclofenac from wastewater
Puga, A., Pazos, M. M., Rosales, E., & Sanromán, M. Á. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.130778 · Cited by 28
Hayoun, B., Escudero-Curiel, S., Bourouina, M., Bacha, S. B., Sanromán, M. Á., & Pazos, M. M. (2022) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2022.118797 · Cited by 28
Ion Exchange for Effective Separation of 3-Nitro-1,2,4-Triazol-5-One (Nto) from WastewaterPreprint
Tran, D., & Weidhaas, J. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4044237 · Cited by 28
Heryanto, H., Tahir, D., Abdullah, B., Kavgacı, M., Rinovian, A., Masrour, R., Prasad, V. S. R., & Sayyed, M. I. (2024) · Desalination and Water Treatment · doi:10.1016/j.dwt.2024.100758 · Cited by 27
Bankole, O. M., Ogunlaja, A. S., Achadu, O. J., Adeyemi, F. O., Ojubola, K. I., Adanlawo, O. S., Olaseni, S. E., Ololade, I. A., & Oladoja, N. A. (2024) · Water Research · doi:10.1016/j.watres.2024.122847 · Cited by 27
Metadata
- Authors
- Ayawei, N., Ebelegi, A. N., & Wankasi, D.
- Affiliations
- Niger Delta University (NG)
- Corresponding author
- Ayawei, Nimibofa
- Venue
- Journal of Chemistry
- Publisher
- Wiley
- Published
- 2017
- Volume
- 2017
- Pages
- 1-11
- ISSN
- 2090-9063 (ISSN-L)
- 2090-9071
- OpenAlex
- W2752698709
- Cited by
- 2,957
- References
- 64
- Citations by year
- 2026: 290 · 2025: 355 · 2024: 427 · 2023: 474 · 2022: 545 · 2021: 406 · 2020: 301 · 2019: 116 · 2018: 42 · 2017: 1
- FWCI
- 67.13
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Journal of Chemistry (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Greater South Information System
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Physical Sciences › Environmental Science › Water Science and Technology › Coagulation and Flocculation Studies
- Keywords
- adsorption isotherms, linear regression, nonlinear regression, error function, low-cost adsorbent, adsorption mechanism
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.