Modelling and Interpretation of Adsorption Isotherms
Open accessThe DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Abstract
The need to design low-cost adsorbents for the detoxification of industrial effluents has been a growing concern for most environmental researchers. So modelling of experimental data from adsorption processes is a very important means of predicting the mechanisms of various adsorption systems. Therefore, this paper presents an overall review of the applications of adsorption isotherms, the use of linear regression analysis, nonlinear regression analysis, and error functions for optimum adsorption data analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The Langmuir isotherm is used when the adsorption process is monolayered with a fixed number of sites [16].”
From Adsorption of toxic metals from greywater using coconut husk biochar and spent green tea (2024) · cites this paper as [16]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728 · cited 1×
“The average relative error was developed byMarquardt [86] with the aim ofminimizing the fractional error distribution across the entire concentration range.”
MethodInsights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479 · cited 2×
“Harkin-Jura isotherm model assumes the possibility of multilayer adsorption on the surface of absorbents having heterogeneous pore distribution [32].”
BackgroundMethodOn the Structure of a Catalyst Surface
Sips, R. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746922 · Cited by 3,650 · cited 1×
“This isotherm model has a linear dependence on concentration in the numerator and an exponential function in the denomination which altogether represent adsorption equilibrium over a wide range of concentration of adsorbate which is applicable in either homogenous or heterogeneous systems because of its versatility [4…”
BackgroundRedlich, O., & Peterson, D. L. (1959) · The Journal of Physical Chemistry · doi:10.1021/j150576a611 · Cited by 2,607
Pore and solid diffusion models for fixed‐bed adsorbers
Weber, T. W., & Chakravorti, R. K. (1974) · AIChE Journal · doi:10.1002/aic.690200204 · Cited by 2,573 · cited 1×
“The Kiselev adsorption isotherm equation also known as localized monomolecular layer model [38] is only valid for surface coverage θ > 0.”
BackgroundAdsorption — from theory to practice
Dąbrowski, A. (2001) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(00)00082-8 · Cited by 2,375
Kinetics and thermodynamics of cadmium ion removal by adsorption onto nano zerovalent iron particles
Boparai, H. K., Joseph, M., & O’Carroll, D. M. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.11.029 · Cited by 1,561 · cited 2×
“The linear form of the Freundlich isotherm is as follows [17]:”
BackgroundMethodHo, Y.-S. (2006) · Water Research · doi:10.1016/j.watres.2005.10.040 · Cited by 1,325
Günay, A., Arslankaya, E., & Tosun, İ. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.12.034 · Cited by 1,122 · cited 2×
“A distinguishing feature of theDubinin-Radushkevich isotherm is the fact that it is temperature dependent; hence when adsorption data at different temperatures are plotted as a function of logarithm of amount adsorbed versus the square of potential energy, all suitable data can be obtained [13].”
BackgroundHAMDAOUI, O., & NAFFRECHOUX, E. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.021 · Cited by 1,013 · cited 2×
“Hamdaoui and Naffrechoux used the Flory-Huggins isothermmodel in their study of the biosorption of Zinc from aqueous solution using coconut coir dust [29].”
BackgroundMethod
Research works printed but not linked: 25
- N. Ayawei, M. Horsfall Jnr, and I. Spiff, "Rhizophora mangle waste as adsorbent for metal ions removal from aqueous solu- tion, " European Journal of Scientic Research, vol. 9, no. 1, p. 21, 2005.
- J. H. De Boer, The Dynamical Character of Adsorption, Oxford University Press, Oxford, England, 1953.
- P. S. Kumara, S. Ramalingamb, S. D. Kiruphac, A. Murugesanc, and S. Vidhyarevicsivanesam, "Adsorption behaviour of Nickel (II) onto cashew nut shell, " in Equilibrium, Thermodynamics, Kinetics, Mechanism and Process design. Chemical Engineering Journal, vol. 1169, pp. 122-131, Adsorption behaviour of Nickel (II) onto cashew nut shell, Equilibrium, 2010.
- P. Sampranpiboon, P. Charnkeitkong, and X. Feng, "Equilib- rium isotherm models for adsorption of zinc (II) ion from aqueous solution on pulp waste, " WSEAS Transactions on Environment and Development, vol. 10, pp. 35-47, 2014.
- U. Israel and U. M. Eduok, "Biosorption of zinc from aqueous solution using coconut (Cocos nuciferaL) coirdust, " Archives of Applied Science Research, vol. 4, pp. 809-819, 2012.
- H. Shahbeig, N. Bagheri, S. A. Ghorbanian, A. Hallajisani, and S. Poorkarimi, "A new adsorption isotherm model of aqueous solutions on granular activated carbon, " World Journal of Mod- elling and Simulation, vol. 9, no. 4, pp. 243-254, 2013.
- N. A. Ebelegi, S. S. Angaye, N. Ayawei, and D. Wankasi, "Removal of congo red from aqueous solutions using fly ash modified with hydrochloric acid, " British Journal of Applied Sci- ence and Technology, vol. 20, no. 4, pp. 1-7, 2017.
- F. Rania and N. S. Yousef, "Equilibrium and Kinetics studies of adsorption of copper (II) on natural Biosorbent, " International Journal of Chemical/Engineering and Applications, vol. 6, no. 5, 2015.
- R. H. Fowler and E. A. Guggenheim, Statistical Thermodynam- ics, Cambridge University Press, London, England, 1939.
- S. K. Knaebel, "Adsorbent selection, " International Journal of Trend in Research and Development, Adsorption Research, Incorporated Dublin, Ohio. 43016, 2004.
- A. V. C. Kiseler, "vapour adsorption in the formation of adsor- bate Mollecule Complexes on the surface, " Kolloid Zhur, vol. 20, pp. 338-348, 1958.
- M. Gubernak, W. Zapała, and K. Kaczmarski, "Analysis of amyl- benzene adsorption equilibria on an RP-18e chromatographic column, " Acta Chromatographica, no. 13, pp. 38-59, 2003.
- A. Achmad, J. Kassim, T. K. Suan, R. C. Amat, and T. L. Seey, "Equilibrium, kinetic and thermodynamic studies on the adsorption of direct dye onto a novel green adsorbent developed from Uncaria gambir extract, " Journal of Physical Science, vol. 23, no. 1, pp. 1-13, 2012.
- A. A. Israel, O. Okon, S. Umoren, and U. Eduok, "Kinetic and equilibrium studies of adsorption of lead (II) Ions from aqueous solution using coir dust (Cocos nucifera L) and it's modified extract resins, " The Holistic Approach to Environment, 2013.
- J. Toth, "State equation of the solid gas interface layer, " Acta Chimica (Academiae Scientiarum) Hungaricae, vol. 69, pp. 311- 317, 1971.
- T. Jafari Behbahani and Z. Jafari Behbahani, "A new study on asphaltene adsorption in porous media, " Petroleum and Coal, vol. 56, no. 5, pp. 459-466, 2014.
- T. Benzaoui, A. Selatnia, and D. Djabali, "Adsorption of copper (II) ions from aqueous solution using bottom ash of expired drugs incineration, " Adsorption Science and Technology, pp. 1- 16, 2017.
- O. Amrhar and M. S. NassaliElyoubi, "Two and three-parameter isothermal modeling for adsorption of Crystal Violet dye onto Natural Illitic Clay: nonlinear regression analysis, " Journal of Chemical and Pharmaceutical Research, vol. 7, no. 9, pp. 892- 903, 2015.
- O. Amrhar, H. Nassai, and M. S. Elyoubi, "Application of non- linear regression analysis to select the optimum absorption isotherm for Methylene Blue adsorption onto Natural Illitic Clay, " Bulletia de la societe Royale des Science de Kiege, vol. 84, pp. 116-130, 2015.
- G. Varank, A. Demir, K. YetiImezsoy, S. Top, E. Sekman, and M. S. Bilgili, "Removal of 4-nitrophenol from aqueous solution by natural low cost adsorbents, " Indian Journal of Chemical Technology, vol. 19, pp. 7-25, 2011.
- S. A. Al-Jlil and M. S. Latif, "Evaluation of Equilibrium iso- therms models for the adsorption of Cu and Ni from wastewater on Benronite clay, " Material and Technology, vol. 47, no. 4, pp. 481-486, 2013.
- M. F. Dilekoglu, "Use of generic algorithm optimzation Tech- niques in the adsorption of phenol on Banana and grapetruit peels, " Journal of the Chemical Society of Pakistan, vol. 38, no. 6, 2016.
- N. Singh and C. Balomajumder, "Removal of cyanide from aqueous media by adsorption using Al-activated carbon: para- metric experiments equilibrium, kinetics and thermodynamic analysis, " in Proceedings of the 2nd International Conference on Science, Technology and Management, University of Delhi, New Delhi, India, 2015.
- K. Vijayaraghavan, "Biosorption of Lan thamide (preseo- dymium) using ulva lactuca: mechanistic study and application of two, three, four and five parameter isotherm models, " Journal of Environment and Biotechnology Research, vol. 1, no. 1, pp. 1-8, 2015.
- C. Chen, "Evaluation of equilibrium sorption isotherm equa- tions, " Open Chemical Engineering Journal, vol. 7, pp. 24-44, 2003.
Cited by
Items 901–1,000 of 1,006
Saad, H., El-Dien, F. A. N., El‐Gamel, N. E. A., & Dena, A. S. A. (2022) · RSC Advances · doi:10.1039/d2ra03476j · Cited by 23
Gyawali, D., Bhandari, S., Basnet, P., Dahal, B., Upadhyaya, I. R., Ghimire, K. N., Pokhrel, M. R., & Paudyal, H. (2022) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2022.100870 · Cited by 23
Raza, M. B., Datta, S. P., Golui, D., Barman, M., Das, T. K., Sahoo, R. N., Upadhyay, D. P., Rahman, M. M., Behera, B., & Naveenkumar, A. (2023) · Molecules · doi:10.3390/molecules28052168 · Cited by 23
“The sorption intensity (RL) represented a dimensionless constant [44], which is calculated using the following equation:”
BackgroundMethodWagassa, A. N., Tufa, L. T., Lee, J., Zereffa, E. A., & Shifa, T. A. (2023) · Global Challenges · doi:10.1002/gch2.202300018 · Cited by 23
Ranaweera, K. H., Grainger, M. N. C., French, A. D., & Mucalo, M. R. (2023) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-023-05029-x · Cited by 24
Pb(II) ions removal via green spinel NiFe2O4 loaded on g-C3N4 nanomaterials
Modwi, A. K., Elamin, N. Y., Al-Ayed, A. S., Ismail, M., & Taha, K. K. (2023) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2023.101031 · Cited by 23
Obanla, O. R., Hestekin, J., Ojewumi, M. E., Bousrih, I., & Fawole, M. C. (2023) · Results in Engineering · doi:10.1016/j.rineng.2023.101584 · Cited by 23
Silva, T. D. A., Arcadio, F., Zeni, L., Martins, R., de Oliveira, J. P., Marques, C., & Cennamo, N. (2024) · Talanta · doi:10.1016/j.talanta.2024.125648 · Cited by 23
Mahgoub, S. M., Essam, D., Eldin, Z. E., Moaty, S. A. A., Shehata, M. R., Farghali, A. A., Abdalla, S. E. B., Othman, S. I., Allam, A. A., El‐Ela, F. I. A., et al. (2024) · Scientific Reports · doi:10.1038/s41598-024-53781-y · Cited by 23
“According to Ayawei et al. 64 , the Langmuir–Freundlich isotherm was created to capture heterogeneous surfaces.”
BackgroundMethodFatma, U. K., Nizami, G., Ahamad, S., Saquib, M., & Hussain, M. K. (2024) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2024.105048 · Cited by 23
Effective removal of acetamiprid and eosin Y by adsorption on pristine and modified MIL-101(Fe)
Sakr, M., Adly, M. S., Alalm, M. G., & Mahanna, H. (2024) · Environmental Science and Pollution Research · doi:10.1007/s11356-024-33821-w · Cited by 23
“Since it is flexible enough to be applied in both homogeneous and heterogeneous systems, the Redlich-Peterson isotherm model may be used to represent the adsorption equilibrium across a wide range of concentrations (Ayawei et al. 2017).”
MethodModified Cellulose for Adsorption of Methylparaben and Butylparaben from an Aqueous Solution
Correa-Navarro, Y. M., Rivera-Giraldo, J. D., & Cardona-Castaño, J. A. (2024) · ACS Omega · doi:10.1021/acsomega.3c10304 · Cited by 23
Ultrasonic assisted adsorption of methylene blue using blood clam shell as a low-cost adsorbent
Misran, E., Supardan, M. D., Iryani, D. A., Pramananda, V., Sihombing, A. F., & Sitorus, D. V. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.102715 · Cited by 23
Kaur, P., Kumar, S., Rani, J., Babu, J. N., & Mittal, S. (2024) · Environmental Science and Pollution Research · doi:10.1007/s11356-024-34686-9 · Cited by 23
“The Redlich-Peterson isotherm combines the Langmuir and Freundlich equations; therefore, the mechanism of adsorption is a hybrid with monolayer adsorption (chemisorption) as well as multilayer adsorption (van der Waals adsorption) processes (Ayawei et al. 2017).”
Sun, S., Verma, S., Anand, B., Younis, S. A., Boukhvalov, D. W., & Kim, K. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155605 · Cited by 24
Hernández-Barreto, D. F., Rodriguez-Estupiñán, J. P., Moreno‐Piraján, J. C., Sierra, R., & Giraldo, L. (2020) · Catalysts · doi:10.3390/catal10050574 · Cited by 23
“The parameter 1/n implied that all solids had an heterogeneous surface, due to 1/n being closer to unity than to zero [59].”
BackgroundAhmadi, H., Javanbakht, M., Akbari‐adergani, B., & Shabanian, M. (2020) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2020.06.013 · Cited by 23
Reuse of Brick Waste as a Cheap-Sorbent for the Removal of Nickel Ions from Aqueous Solutions
Mhawesh, T. H., & Ali, Z. T. A. (2020) · Iraqi Journal of Chemical and Petroleum Engineering · doi:10.31699/ijcpe.2020.2.3 · Cited by 23
“ Elovich model: is based on a kinetic principle assuming that the sorption effective sites increase exponentially with sorption, which implies a multilayer sorption, [17], [18].”
BackgroundAguilar, M. D. J. S., Martínez-Luévanos, A., Sánchez-Castillo, M. A., Pedroza, F. R. C., Toro, N., & Narváez-García, V. M. (2021) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2021.103061 · Cited by 23
Adsorption of Cd (II) Ions by Coconut Copra: Isotherm and Regeneration Studies
Lee, T. Z. E., Zhang, J., Feng, Y., Lin, X., & Zhou, J. (2021) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/657/1/012026 · Cited by 23
“Freundlich isotherm model deals with adsorption process on heterogonous surfaces [30].”
BackgroundKhajeh, M., & Ghaemi, A. (2021) · International Journal of Environmental & Analytical Chemistry · doi:10.1080/03067319.2021.1938018 · Cited by 23
Paul, A. A., Kelechukwu, B. O., & Uchenna, S. M. (2021) · International Journal of the Physical Sciences · doi:10.5897/ijps2021.4945 · Cited by 23
“In order to discriminate between physical and chemical adsorption (Beda et al., 2017; Foo and Hameed, 2010; Ayawei et al., 2017) at the adsorbate-adsorbent interface the Dubinin-Radushkevich isotherm model is used.”
MethodSuryana, S., Mutakin, M., Rosandi, Y., & Hasanah, A. N. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5507 · Cited by 23
Farhana, A., Jenifer Selvarani, A., Samrot, A. V., Alsrhani, A., Raji, P., Sahithya, C. S., Cypriyana, P. J. J., Senthilkumar, P., Ling, M. P., & Yishak, S. (2022) · Journal of Nanomaterials · doi:10.1155/2022/4326939 · Cited by 23
“The isotherms were plotted by calculating Ce, qe, 1/Ce, ln Ce, 1/qe, and ln qe values [35].”
MethodEfficient removal of Pb (II) from water solution using CaFe2−x−yGdxSmyO4 ferrite nanoparticles
Saeid, Y. A., & Ateia, E. E. (2022) · Applied Physics A · doi:10.1007/s00339-022-05718-3 · Cited by 23
Lobzenko, I., Burachevskaya, M., Валерьевна, З. И., Barakhov, A., Bauer, T. V., Манджиева, С. С., Sushkova, S., Minkina, T., Tereschenko, A., Kalinitchenko, V., et al. (2022) · Agriculture · doi:10.3390/agriculture12101689 · Cited by 23
Rezazadeh, N., Danesh, S., Eftekhari, M., & Farahmandzadeh, M. (2022) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2022.120720 · Cited by 23
Efficient and Rapid Removal of Pb(II) and Cu(II) Heavy Metals from Aqueous Solutions by MgO Nanorods
Ghoniem, M. G., Aissa, M. A. B., Ali, F. A. M., & Khairy, M. (2022) · Inorganics · doi:10.3390/inorganics10120256 · Cited by 23
Altynbaeva, L. S., Mashentseva, A. A., Aimanova, N. A., Zheltov, D. A., Shlimas, D. I., Nurpeisova, D. T., Barsbay, M., Abuova, F. U., & Zdorovets, M. V. (2023) · Membranes · doi:10.3390/membranes13050495 · Cited by 23
“The adsorbed molecules do not interact with each other and desorb after a certain time; thus, a dynamic equilibrium is established [65,66].”
BackgroundHernández-Barreto, D. F., Giraldo, L., & Moreno‐Piraján, J. C. (2020) · Data in Brief · doi:10.1016/j.dib.2020.106312 · Cited by 23
Pieczykolan, B. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms26167912 · Cited by 22
“In contrast, the SIPS isotherm model is a combination of the Freundlich and Langmuir models, which describe adsorption on a heterogeneous surface, thereby avoiding the limitations associated with increased adsorbate concentration [78].”
Adsorption of Tetrathiomolybdate to Iron Sulfides and Its Impact on Iron Sulfide Transformations
Miller, N., Dougherty, M., Du, R., Sauers, T., Yan, C., Pines, J. E., Meyers, K. L., Dang, Y. M., Nagle, E., Ni, Z., et al. (2020) · ACS Earth and Space Chemistry · doi:10.1021/acsearthspacechem.0c00176 · Cited by 22
Rahaman, M. S., Hasnine, S. M. M., Ahmed, T., Sultana, S., Bhuiyan, M. A. Q., Manir, M. S., Ullah, N., Sen, S. K., Hossain, M. S., Hossain, M. S., et al. (2021) · Iranian Polymer Journal · doi:10.1007/s13726-021-00949-2 · Cited by 22
Pham, N. L., Luu, T. L. A., Lâm, N. H., & Nguyen, C. T. (2021) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2021.125014 · Cited by 22
Cobalt ion removal using magnetic biochar obtained from conocarpus erectus leaves
Qasim, H. M., Abudi, Z. N., & Alzubaidi, L. A. (2022) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-022-02307-5 · Cited by 22
“(5) and (6), accordingly [48]: Linear plots have been obtained for C e /q e versus C e and log q e versus log C e , as shown in Fig.”
Removal of Azo Dye Carmoisine by Adsorption Process on Diatomite
Labiod, K., Hazourli, S., Bendaia, M., Tlili, M., Aitbara, A., Graine, R., & Meradi, H. (2022) · Adsorption Science & Technology · doi:10.1155/2022/9517605 · Cited by 22
“…Toth, Koble-Corrigan, Sips, Flory-Huggins, and Radke-Prausnitz makes it possible to provide valuable information such as the nature of the adsorption (monolayer and multilayer), the adsorbent/adsorbate interaction mechanisms, the surface properties, and the degree of a ffi nity of the adsorbent [69].”
BackgroundZhao, Y., Luan, H., Yang, B., Li, Z., Song, M., Li, B., & Tang, X. (2023) · Water · doi:10.3390/w15050956 · Cited by 22
Ansari, A., Shahhosseini, S., & Maleki, A. R. (2023) · Separation Science and Technology · doi:10.1080/01496395.2023.2189049 · Cited by 22
“The isotherm Hill model assumes a cooperative phenomenon with the binding ability among different sites on the adsorbent.([74]) The Langmuir model, as the second fitting R(2) with experimental data, is an empirical model that best describes the chemical adsorption reaction due to a mono-layer adsorption”
BackgroundMethodZeynali, V., Mousavi, S. M., Saljoughi, E., Kiani, S., & Sillanpää, M. E. T. (2023) · Polymer Composites · doi:10.1002/pc.27393 · Cited by 22
Umeh, C. T., Nduka, J. K., Iwuozor, O. K., Omokpariola, D. O., Dulta, K., Ezeh, S. C., & Emeka, R. N. (2023) · International Journal of Environmental & Analytical Chemistry · doi:10.1080/03067319.2023.2263383 · Cited by 22
Chaabane, L., Nikolantonaki, M., Weber, G., Bezverkhyy, I., Chassagnon, R., Assifaoui, A., & Bouyer, F. (2023) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2023.105169 · Cited by 22
Xolo, T., & Mahlambi, P. N. (2024) · Journal of Analytical Science & Technology · doi:10.1186/s40543-024-00418-4 · Cited by 22
“The adsorption isotherms were done to understand the interaction between ARVDs and MIP sorbent and also to describe the relationship between the ARVDs amount adsorbed by the MIP adsorbent at equilibrium material and the bulk fluid phase concentration at a constant temperature (Ayawei et al. 2017).”
BackgroundAlsehli, B. R., Hassan, M. H. A., Mohamed, D. S., Saddik, M. S., & Al-Hakkani, M. F. (2024) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2024.139261 · Cited by 22
Agorku, E. S., Kangmennaa, A., Danu, B. Y., Ampong, F. K., & Voegborlo, R. B. (2024) · Next Sustainability · doi:10.1016/j.nxsust.2024.100069 · Cited by 22
Alaya-Ibrahim, S., Kovo, A. S., Abdulkareem, A. S., Adeniyi, O. D., & Yahya, M. D. (2019) · Chemical Engineering Communications · doi:10.1080/00986445.2019.1641490 · Cited by 22
“…Harkin–Jura Isothermal Model is based on the assumption that there is monolayer adsorption on an adsorbent that has heterogeneous pore distribution (Ayawei et al., 2017), which is linearly expressed as; 1 qe2 ¼ B A 1 AlogCe (9) B and A are the Harkin–Jura isotherm constants which are evaluated…”
BackgroundSalawudeen, A. O., Tawabini, B., Al-Shaibani, A. M., & Saleh, T. A. (2020) · Environmental Nanotechnology Monitoring & Management · doi:10.1016/j.enmm.2020.100288 · Cited by 22
Toluene Abatement by Simultaneous Adsorption and Oxidation over Mixed-Metal Oxides
Adebayo, B. O., Krishnamurthy, A., Rownaghi, A. A., & Rezaei, F. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c02550 · Cited by 22
Baldan, H., da Silva, E., Saltarelli, M., Crispim, T. D., Nassar, E. J., Trujillano, R., Rives, V., Vicente, M. A., Gil, A., Korili, S. A., et al. (2020) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2020.100025 · Cited by 22
Islam, M. R., Sanderson, P., Johansen, M. P., Payne, T. E., & Naidu, R. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.129338 · Cited by 22
Zaidi, N. A. H. M., Sallehuddin, F. N., Lim, L. B. L., & Kooh, M. R. R. (2021) · International Journal of Environmental & Analytical Chemistry · doi:10.1080/03067319.2021.1884238 · Cited by 22
Facile Synthesis of g-C3N4/MoO3 Nanohybrid for Efficient Removal of Aqueous Diclofenac Sodium
Rashid, J., Saleemi, F., Akram, B., Wang, L., Hussain, N., & Xu, M. (2021) · Nanomaterials · doi:10.3390/nano11061564 · Cited by 22
“2nd order kinetic model suggests adsorption rates depend on the rate of adsorbate diffusion in the adsorbent pores [43].”
BackgroundGujar, R. B., Mohapatra, P. K., Iqbal, M., Huskens, J., & Verboom, W. (2021) · Journal of Chromatography A · doi:10.1016/j.chroma.2021.462401 · Cited by 22
Geleto, M. A., Forján, R., Arco-Lázaro, E., Covelo, E. F., Marcet, P., & Cerqueira, B. (2022) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-022-03989-0 · Cited by 22
“The coefficient of determinations (R2) is one of common error measures (Ayawei et al., 2017; Bharat, 2017).”
BackgroundSafri, A., & Fletcher, A. J. (2022) · Gels · doi:10.3390/gels8040215 · Cited by 22
“91), hence, the adsorption system is predicted to be heterogenous [33].”
BackgroundMethodSashikesh, G., Anushkkaran, P., Praveena, Y., Manjceevan, A., Velauthamurty, K., & Kandasamy, V. (2023) · Current Research in Green and Sustainable Chemistry · doi:10.1016/j.crgsc.2023.100355 · Cited by 22
Ye, H., Yu, K., Li, B., & Guo, J. (2023) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-023-03740-w · Cited by 22
“(4)) [26],and Koble-Corrigan (Eq.”
Murtada, K., de Andrés, F., Zougagh, M., & Ríos, Á. (2019) · Microchemical Journal · doi:10.1016/j.microc.2019.104193 · Cited by 22
“314 J mol -1 K -1 ), and T the absolute temperature (K) [71].”
BackgroundRemoval of antibiotics from aqueous solution by chitosan grafted banana peel activated carbon
Khdir, H. M., & İbrahim, B. M. (2025) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2025.127431 · Cited by 21
Abdelkawy, A. M., Elantabli, F. M., Mahmoud, R., Mahgoub, S. M., El‐Ela, F. I. A., Mohamed, H. A., & Moaty, S. A. A. (2025) · Journal of Pharmaceutical Innovation · doi:10.1007/s12247-025-09988-1 · Cited by 21
Sorption of oils by a commercial non-woven polypropylene sorbent
Zaro, M., Silvestre, W. P., Fedrigo, J. G., Zeni, M., & Baldasso, C. (2021) · Research Society and Development · doi:10.33448/rsd-v10i14.22671 · Cited by 21
“According to Ahmad, Sumathi, and Hameed (2005) and Ayawei, Ebelegi, and Wankasi (2017), RL = 0 indicates an irreversible process; RL = 1.0 indicates linear sorption; RL values in the range of 0.0-1.0 indicate a favorable adsorption process; RL values greater than 1.0 indicate a non-favorable…”
BackgroundMethodInfluentialAshfaq, A., Nadeem, R., Gong, H., Rashid, U., Noreen, S., Rehman, S. U., Ahmed, Z., Adil, M., Akhtar, N., Ashfaq, M. Z., et al. (2022) · Polymers · doi:10.3390/polym14132644 · Cited by 21
“where, qe (mg/g) = quantity of Cr (VI) adsorbed by specified amount of adsorbent at equilibrium, Ce (mg/L) = equilibrium concentration, Kf = intercept constant obtained from regression equation, and 1/n = slope constant obtained from regression equation [26].”
BackgroundDecolourisation of Real Industrial and Synthetic Textile Dye Wastewater Using Activated Dolomite
Zahuri, A. A., Patah, M. F. A., Kamarulzaman, Y., Hashim, N. H., Thirumoorthi, T., Mohtar, W. H. M. W., Hanafiah, Z. M., Amir, Z., & Wan‐Mohtar, W. A. A. Q. I. (2023) · Water · doi:10.3390/w15061172 · Cited by 21
Fita, G., Djakba, R., Mouhamadou, S., Duc, M., Rao, S., Popoola, L. T., Massaï, H., & Benoıt, L. B. (2023) · Diamond and Related Materials · doi:10.1016/j.diamond.2023.110421 · Cited by 21
Alqarni, L. S., Alshahrani, A. A., Alhussain, H., Elamin, N. Y., Ismail, M., Taha, K. K., & Modwi, A. K. (2024) · Diamond and Related Materials · doi:10.1016/j.diamond.2024.110803 · Cited by 21
Iqbal, D., Ullah, R., Zhao, R., Dou, Y., Di, Y., & Ning, X. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.126677 · Cited by 21
Sobczyk, M., Dinh, C. N., Marzec, M. M., Bazarkina, E., Kvashnina, K. O., Cwanek, A., Łokas, E., & Bajda, T. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.141206 · Cited by 21
Sadeghi, A. K., Barzegarzadeh, M., Sohrabi, N., & Amini‐Fazl, M. S. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.112281 · Cited by 21
Teressa, D., Kibret, K., Dechasa, N., & Wogi, L. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e35784 · Cited by 21
“This suggests the presence of several adsorption sites or heterogeneous adsorbent surfaces with varying adsorption energies [119,120].”
BackgroundHayat, M. K., Manzoor, S., Raza, N., Raza, H., Javid, A., Ali, Z., Khan, M. I., Algethami, F. K., AlMasoud, N., & Alomar, T. S. (2024) · Food Chemistry · doi:10.1016/j.foodchem.2024.141967 · Cited by 21
Enyoh, C. E., & Wang, Q. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.131975 · Cited by 21
Study of Caesalpinia spinosa Extracts As Green Corrosion Inhibitor for Mild Steel
Hidalgo, J. S., Hidalgo, L., Aguiar, C. D. S., Madroñero, D. B. G., Galambos, I., Vilasó-Cadre, J. E., Reyes, I. A., Brânzanic, A. M. V., Ignat, N., & Turdean, G. L. (2025) · Langmuir · doi:10.1021/acs.langmuir.5c00224 · Cited by 21
Hui, T., & Zaini, M. A. A. (2020) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-020-00955-z · Cited by 21
“g = 1, the R-P equation is simplified to the Langmuir equation, whereby KR (R-P) represents qmb (Langmuir), and aR (R-P) is similar to b (Langmuir) [6, 55].”
BackgroundKaewket, K., Maensiri, S., & Ngamchuea, K. (2020) · Colloids and Interface Science Communications · doi:10.1016/j.colcom.2020.100310 · Cited by 21
Removal of Zn(II) in Synthetic Wastewater Using Agricultural Wastes
Aguilar, D. L. G., Miranda, J. P. R., Miller, M. X. A., Astudillo, R. I. M., & Esteban-Muñoz, J. A. (2020) · Metals · doi:10.3390/met10111465 · Cited by 21
Hashem, A., Abou-Okeil, A., Fikry, M., Aly, A., & Aniagor, C. O. (2021) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-021-05416-x · Cited by 21
"An Overview of Using Error function in Adsorption Isotherm Modeling "
Hami, H. K., Abbas, R. F., Mahdi, A. S., & Maryoosh, A. A. B. (2020) · Muthanna Journal of Pure Science · doi:10.52113/2/08.01.2021/22-30 · Cited by 21
“The purpose of this review is to explain the role of error function in the adsorption process, where the error function is the most applicable tools to determine the suitable adsorption isotherm by determines the adsorbents distribution, analyzes the adsorption system, and check for a match of theoretical assumptions…”
Nunes, K. G. P., Jurado-Davila, V., Amador, I. C. B., Estumano, D. C., & Féris, L. A. (2021) · Journal of Environmental Science and Health Part A · doi:10.1080/10934529.2021.1977059 · Cited by 21
Nithya, R., Thirunavukkarasu, A., & Sivasankari, C. (2022) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-021-02269-0 · Cited by 21
Keerthanan, S., Jayasinghe, C. V. L., Bolan, N. S., Rinklebe, J., & Vithanage, M. S. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.134073 · Cited by 21
Removal of copper using chitosan beads embedded with amidoxime grafted graphene oxide nanohybids
Nasir, A., Hassan, M. I. U., Raza, A., Tahir, M., & Yasin, T. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.188 · Cited by 21
Gupta, A. R., Indurkar, P. D., Mondal, M., Joshi, V. C., Bhattacharya, A., & Sharma, S. (2023) · Environmental Pollution · doi:10.1016/j.envpol.2023.121255 · Cited by 21
Gasification char residues management: Assessing the characteristics for adsorption application
Ahmad, A. A., Ahmad, M. A., Ali, U. F. M., & Ken, K. (2023) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2023.104993 · Cited by 21
Nitrogen Removal from Landfill Leachate Using Biochar Derived from Wheat Straw
Igwegbe, C. A., Kozłowski, M., Wąsowicz, J., Pęczek, E., & Białowiec, A. (2024) · Materials · doi:10.3390/ma17040928 · Cited by 21
“The Jovanovich model also follows Langmuir’s assumptions of monolayered adsorption on homogeneous surfaces [88].”
BackgroundPires, B. C., Dutra, F. V. A., & Borges, K. B. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-07207-2 · Cited by 21
Sassi, W., Boubaker, H., Ben-khaled, H., Dhaoui, S., Ghorbal, A., & Hihn, J. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-12612-7 · Cited by 21
“This isotherm was applicable to adsorption processes on heterogenous surfaces as we reported by Ayawei et al. (2015a, 2015b, 2017).”
BackgroundMethodInfluentialAbulikemu, G., Pressman, J. G., Sorial, G. A., Sanan, T. T., Haupert, L. M., Burkhardt, J. B., Smith, S. J., Kleiner, E. J., Stebel, E. K., Gray, B. N., et al. (2024) · Water Research · doi:10.1016/j.watres.2024.122977 · Cited by 20
Sriram, G., Dhanabalan, K., Vishwanath, R. S., & Oh, T. H. (2025) · Inorganic Chemistry Frontiers · doi:10.1039/d5qi00952a · Cited by 20
Kumar, A., Yadav, K. D., & Kumar, S. (2025) · Bioresource Technology Reports · doi:10.1016/j.biteb.2025.102222 · Cited by 20
Shaba, E. Y., Tijani, J. O., Jacob, J. O., & Suleiman, M. A. T. (2022) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.7098 · Cited by 20
Brunhoferová, H., Venditti, S., & Hansen, J. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2022.115593 · Cited by 20
Golubeva, O. Y., Alikina, Y. A., & Brazovskaya, E. Y. (2022) · Nanomaterials · doi:10.3390/nano12152559 · Cited by 20
“The Temkin isotherm was developed based on the mechanism of chemisorption [28,67].”
MethodAzithromycin Adsorption onto Different Soils
Cela-Dablanca, R., Barreiro, A., Rodríguez-López, L., Rodríguez, P. P., Arias‐Estévez, M., Fernández‐Sanjurjo, M. J., Álvarez‐Rodríguez, E., & Núñez‐Delgado, A. (2022) · Processes · doi:10.3390/pr10122565 · Cited by 20
“The experimental data obtained in the adsorption/desorption tests were adjusted to the Freundlich (Equation (1)), Langmuir (Equation (2)) and Linear (Equation (3)) models [36].”
MethodPerformance evaluation of a novel multi-tray packed bed solid desiccant dehumidification system.
Abd-Elhady, M. M., El-Sharkawy, I. I., Hamed, A. M., & Salem, M. S. A. (2022) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2022.12.001 · Cited by 20
Green Synthesis Ca-MgO Nanosorbent for the Uptake of Cobalt Ions from Aqueous Media
Al-Awaji, N., Boukriba, M., Idriss, H., Aissa, M. A. B., Bououdina, M., & Modwi, A. K. (2022) · Advances in Materials Science and Engineering · doi:10.1155/2022/9174538 · Cited by 20
Kadari, M., Makhlouf, M., Khaoua, O. O., Kesraoui, M., Bouriche, S., & Benmaamar, Z. (2023) · Chemistry Africa · doi:10.1007/s42250-023-00586-7 · Cited by 20
Challa, M., Chinnam, S., Ambika, M. R., Nandagudi, A., Yallur, B. C., & Adimule, V. M. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e13223 · Cited by 20
“Another feature of the Langmuir isothermal model is separation factor RL which is dimensionless, as shown below equation (10) [24,26,36,48,49].”
BackgroundPatil, D. J., & Behera, S. N. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-26059-5 · Cited by 20
Gad, S. M., Jin, Z., Emad, S., Vergara, J. E., Yawas, D. S., Dagwa, I. M., & Omiogbemi, I. M. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e14693 · Cited by 20
Adsorption of toxic metals from greywater using coconut husk biochar and spent green tea
Duwiejuah, A. B., Adjei, E. F., & Alhassan, E. H. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e38189 · Cited by 19
“The Langmuir isotherm is used when the adsorption process is monolayered with a fixed number of sites [16].”
BackgroundMethodSultana, A. I., Chambers, C., Ahmed, M. M. N., Pathirathna, P., & Reza, T. (2022) · Nanomaterials · doi:10.3390/nano12203575 · Cited by 17
“Applying the model, the Langmuir constant is related to adsorption capacity and it can be correlated to surface area and porosity where large surface area and pore volume indicates higher adsorption capacity [39].”
BackgroundMethod
Metadata
- Authors
- Ayawei, N., Ebelegi, A. N., & Wankasi, D.
- Affiliations
- Niger Delta University (NG)
- Corresponding author
- Ayawei, Nimibofa
- Venue
- Journal of Chemistry
- Publisher
- Wiley
- Published
- 2017
- Volume
- 2017
- Pages
- 1-11
- ISSN
- 2090-9063 (ISSN-L)
- 2090-9071
- OpenAlex
- W2752698709
- Cited by
- 2,957
- References
- 64
- Citations by year
- 2026: 290 · 2025: 355 · 2024: 427 · 2023: 474 · 2022: 545 · 2021: 406 · 2020: 301 · 2019: 116 · 2018: 42 · 2017: 1
- FWCI
- 67.13
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Journal of Chemistry (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Greater South Information System
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Physical Sciences › Environmental Science › Water Science and Technology › Coagulation and Flocculation Studies
- Keywords
- adsorption isotherms, linear regression, nonlinear regression, error function, low-cost adsorbent, adsorption mechanism
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.