Bearing fault detection by one-dimensional convolutional neural networks
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Bearing faults are the biggest single source of motor failures. Artificial Neural Networks (ANNs) and other decision support systems are widely used for early detection of bearing faults. The typical decision support systems require feature extraction and classification as two distinct phases. Extracting fixed features each time may require a significant computational cost preventing their use in real‐time applications. Furthermore, the selected features for the classification phase may not represent the most optimal choice. In this paper, the use of 1D Convolutional Neural Networks (CNNs) is proposed for a fast and accurate bearing fault detection system. The feature extraction and classification phases of the bearing fault detection are combined into a single learning body with the implementation of 1D CNN. The raw vibration data (signal) is fed into the proposed system as input eliminating the need for running a separate feature extraction algorithm each time vibration data is analyzed for classification. Implementation of 1D CNNs results in more efficient systems in terms of computational complexity. The classification performance of the proposed system with real bearing data demonstrates that the reduced computational complexity is achieved without a compromise in fault detection accuracy.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Real-Time Patient-Specific ECG Classification by 1-D Convolutional Neural Networks
Kiranyaz, S., Ince, T., & Gabbouj, M. (2016) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2015.2468589 · Cited by 1,912 · cited 9×
“In this paper, an adaptive implementation of 1D Convolutional Neural Networks (CNNs) is proposed for bearing health monitoring.”
MethodInfluentialQiu, H., Lee, J., Lin, J., & Yu, G. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.03.007 · Cited by 1,477 · cited 1×
“The test setup consisting of four double row bearings on one shaft is depicted in Figure 5 [37].”
Wavelets for fault diagnosis of rotary machines: A review with applications
Yan, R., Gao, R. X., & Chen, X. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.04.015 · Cited by 1,446
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2582729 · Cited by 1,407
Self-citationModel for the vibration produced by a single point defect in a rolling element bearing
McFadden, P. D., & Smith, J. D. (1984) · Journal of Sound and Vibration · doi:10.1016/0022-460x(84)90595-9 · Cited by 931
Vibration‐based Condition Monitoring: Industrial, Aerospace and Automotive Applications
Randall, R. B. (2011) · Wiley eBooks · doi:10.1002/9780470977668 · Cited by 868
Neural-network-based motor rolling bearing fault diagnosis
Li, B., Chow, M.-Y., Tipsuwan, Y., & Hung, J. C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873214 · Cited by 797
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartfield, R. G. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475697 · Cited by 761
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602 · cited 1×
“Motor vibration analysis and motor current signature analysis (MCSA) are two commonly used noninvasive methods in bearing condition monitoring [3].”
MethodBin, G. F., Gao, J. J., Li, X. J., & Dhillon, B. S. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.08.002 · Cited by 499
Benbouzid, M. E. H., Vieira, M., & Theys, C. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.737588 · Cited by 378
CNP: An FPGA-based processor for Convolutional Networks
Farabet, C., Poulet, C., Han, J. Y., & LeCun, Y. (2009) · 2009 International Conference on Field Programmable Logic and Applications · doi:10.1109/fpl.2009.5272559 · Cited by 367
Zidani, F., Diallo, D., Benbouzid, M. E. H., & Nait-Said, R. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911951 · Cited by 335
Application of discrete wavelet transform for detection of ball bearing race faults
Prabhakar, S., Mohanty, A. R., & Sekhar, A. S. (2002) · Tribology International · doi:10.1016/s0301-679x(02)00063-4 · Cited by 307
Bearing Damage Detection via Wavelet Packet Decomposition of the Stator Current
Eren, L., & Devaney, M. J. (2004) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2004.823323 · Cited by 282
Self-citationElectric Machines: Modeling, Condition Monitoring, and Fault Diagnosis
Toliyat, H. A., Nandi, S., Choi, S., & Kelk, H. M. (2012) · CERN Document Server (European Organization for Nuclear Research) · Cited by 263
Ballal, M. S., Khan, Z. J., Suryawanshi, H. M., & Sonolikar, R. L. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888789 · Cited by 251
Machinery Vibration: Measurement and Analysis
Wowk, V. (1991) · Medical Entomology and Zoology · Cited by 229
Fault diagnosis of induction motor based on decision trees and adaptive neuro-fuzzy inference
Tran, V. T., Yang, B.-S., Oh, M.-S., & Tan, A. C. C. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.12.010 · Cited by 224
Induction motor fault diagnosis based on neuropredictors and wavelet signal processing
Kim, K., & Parlos, A. G. (2002) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2002.1011258 · Cited by 212
Current signature analysis of induction motor mechanical faults by wavelet packet decomposition
Ye, Z., Wu, B., & Sadeghian, A. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.819682 · Cited by 193
Advanced Induction Motor Rotor Fault Diagnosis Via Continuous and Discrete Time–Frequency Tools
Pons-Llinares, J., Antonino-Daviu, J. A., Riera-Guasp, M., Bin Lee, S., Kang, T.-J., & Yang, C. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2355816 · Cited by 180
Induction machine condition monitoring with higher order spectra
Arthur, N., & Penman, J. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873211 · Cited by 170
Bearing Fault Detection Via Stator Current Noise Cancellation and Statistical Control
Zhou, W., Habetler, T. G., & Harley, R. G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2005018 · Cited by 165
Neural networks application for induction motor faults diagnosis
Kowalski, C. T., & Orlowska-Kowalska, T. (2003) · Mathematics and Computers in Simulation · doi:10.1016/s0378-4754(03)00087-9 · Cited by 165
On initial fault detection of a tapered roller bearing: Frequency domain analysis
Su, Y.-T., & Lin, S.-J. (1992) · Journal of Sound and Vibration · doi:10.1016/0022-460x(92)90646-f · Cited by 153
Filippetti, F., Bellini, A., & Capolino, G. (2013) · 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) · doi:10.1109/wemdcd.2013.6525180 · Cited by 128 · cited 1×
“Time-domain [4], frequency-domain [5–8], enhanced frequency [9–12], and time-scale analysis [13–16] are four main areas where signal processing techniques are used in the feature extraction [17].”
BackgroundLi, X., Zheng, A., Zhang, X., Li, C., & Zhang, L. (2013) · Measurement · doi:10.1016/j.measurement.2013.04.081 · Cited by 114
Sensorless fault diagnosis of induction motors
Kim, K., Parlos, A. G., & Bharadwaj, R. M. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817693 · Cited by 81
Sensorless, online motor diagnostics
Kliman, G. B., Premerlani, W. J., Yazıcı, B., Koegl, R. A., & Mazereeuw, J. (1997) · IEEE Computer Applications in Power · doi:10.1109/67.582451 · Cited by 81
Liu, H., Wang, X., & Lü, C. (2014) · Mathematical Problems in Engineering · doi:10.1155/2014/765621 · Cited by 55
Li, D. Z., Wang, W., & Ismail, F. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2419031 · Cited by 52
Neural network based motor bearing fault detection
Eren, L., Karahoca, A., & Devaney, M. J. (2004) · Conference proceedings - IEEE Instrumentation/Measurement Technology Conference · doi:10.1109/imtc.2004.1351399 · Cited by 37
Self-citationWavelet based Neuro-Detector for low frequencies of vibration signals in electric motors
Bayram, D., & Şeker, S. (2012) · Applied Soft Computing · doi:10.1016/j.asoc.2012.11.019 · Cited by 25
Induction motor faults diagnostic via artificial neural network (ANN)
Stefano, R. D., Meo, S., & Scarano, M. (2002) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.1994.333115 · Cited by 15
Application of artificial intelligence techniques to the study of machine signatures
Chen, W.-Y., Xu, J., & Panda, S. K. (2012) · doi:10.1109/icelmach.2012.6350218 · Cited by 9
Research works printed but not linked: 2
- 2012, STI Field Application Note, Rolling Element Bearings, REB
- Lee J., 2007, Rexnord Technical Services: Bearing Data Set
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
Avci, O., Abdeljaber, O., Kiranyaz, S., Hussein, M., Gabbouj, M., & Inman, D. J. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107077 · Cited by 1,442
A survey on deep learning based bearing fault diagnosis
Hoang, D.-T., & Kang, H.-J. (2019) · Neurocomputing · doi:10.1016/j.neucom.2018.06.078 · Cited by 866
A generic intelligent bearing fault diagnosis system using compact adaptive 1D CNN classifier
Eren, L., Ince, T., & Kiranyaz, S. (2019) · Journal of Signal Processing Systems · doi:10.1007/s11265-018-1378-3 · Cited by 723
“In a recent work [34, 35], Deep Neural Network (DNN)-based model is successfully applied to classify bearing faults directly from raw sensor data.”
BackgroundMethodInfluentialSelf-citationA comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
Metadata
- Authors
- Eren, L.
- Affiliations
- İzmir University of Economics (TR)
- Corresponding author
- Eren, Levent
- ORCID
- Eren, Levent
- Venue
- Mathematical Problems in Engineering
- Publisher
- Wiley
- Published
- 2017-01
- Volume
- 2017
- Issue
- 1
- ISSN
- 1024-123X (ISSN-L)
- 1563-5147
- OpenAlex
- W2737404945
- Cited by
- 250
- References
- 36
- Citations by year
- 2026: 12 · 2025: 31 · 2024: 38 · 2023: 23 · 2022: 40 · 2021: 41 · 2020: 35 · 2019: 22 · 2018: 8
- FWCI
- 11.17
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Mathematical Problems in Engineering (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical Fault Detection and Protection
- Keywords
- bearing fault detection, 1D convolutional neural network, vibration signal analysis, end-to-end feature extraction, computational complexity reduction, real-time fault diagnosis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.