Bearing fault detection by one-dimensional convolutional neural networks
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Bearing faults are the biggest single source of motor failures. Artificial Neural Networks (ANNs) and other decision support systems are widely used for early detection of bearing faults. The typical decision support systems require feature extraction and classification as two distinct phases. Extracting fixed features each time may require a significant computational cost preventing their use in real‐time applications. Furthermore, the selected features for the classification phase may not represent the most optimal choice. In this paper, the use of 1D Convolutional Neural Networks (CNNs) is proposed for a fast and accurate bearing fault detection system. The feature extraction and classification phases of the bearing fault detection are combined into a single learning body with the implementation of 1D CNN. The raw vibration data (signal) is fed into the proposed system as input eliminating the need for running a separate feature extraction algorithm each time vibration data is analyzed for classification. Implementation of 1D CNNs results in more efficient systems in terms of computational complexity. The classification performance of the proposed system with real bearing data demonstrates that the reduced computational complexity is achieved without a compromise in fault detection accuracy.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Real-Time Patient-Specific ECG Classification by 1-D Convolutional Neural Networks
Kiranyaz, S., Ince, T., & Gabbouj, M. (2016) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2015.2468589 · Cited by 1,912 · cited 9×
“In this paper, an adaptive implementation of 1D Convolutional Neural Networks (CNNs) is proposed for bearing health monitoring.”
MethodInfluentialQiu, H., Lee, J., Lin, J., & Yu, G. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.03.007 · Cited by 1,477 · cited 1×
“The test setup consisting of four double row bearings on one shaft is depicted in Figure 5 [37].”
Wavelets for fault diagnosis of rotary machines: A review with applications
Yan, R., Gao, R. X., & Chen, X. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.04.015 · Cited by 1,446
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2582729 · Cited by 1,407
Self-citationModel for the vibration produced by a single point defect in a rolling element bearing
McFadden, P. D., & Smith, J. D. (1984) · Journal of Sound and Vibration · doi:10.1016/0022-460x(84)90595-9 · Cited by 931
Vibration‐based Condition Monitoring: Industrial, Aerospace and Automotive Applications
Randall, R. B. (2011) · Wiley eBooks · doi:10.1002/9780470977668 · Cited by 868
Neural-network-based motor rolling bearing fault diagnosis
Li, B., Chow, M.-Y., Tipsuwan, Y., & Hung, J. C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873214 · Cited by 797
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartfield, R. G. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475697 · Cited by 761
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602 · cited 1×
“Motor vibration analysis and motor current signature analysis (MCSA) are two commonly used noninvasive methods in bearing condition monitoring [3].”
MethodBin, G. F., Gao, J. J., Li, X. J., & Dhillon, B. S. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.08.002 · Cited by 499
Research works printed but not linked: 2
- 2012, STI Field Application Note, Rolling Element Bearings, REB
- Lee J., 2007, Rexnord Technical Services: Bearing Data Set
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
Avci, O., Abdeljaber, O., Kiranyaz, S., Hussein, M., Gabbouj, M., & Inman, D. J. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107077 · Cited by 1,442
A survey on deep learning based bearing fault diagnosis
Hoang, D.-T., & Kang, H.-J. (2019) · Neurocomputing · doi:10.1016/j.neucom.2018.06.078 · Cited by 866
A generic intelligent bearing fault diagnosis system using compact adaptive 1D CNN classifier
Eren, L., Ince, T., & Kiranyaz, S. (2019) · Journal of Signal Processing Systems · doi:10.1007/s11265-018-1378-3 · Cited by 723
“In a recent work [34, 35], Deep Neural Network (DNN)-based model is successfully applied to classify bearing faults directly from raw sensor data.”
BackgroundMethodInfluentialSelf-citationA comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
Neupane, D., & Seok, J. (2020) · IEEE Access · doi:10.1109/access.2020.2990528 · Cited by 568
Rolling element bearing fault diagnosis using convolutional neural network and vibration image
Hoang, D.-T., & Kang, H.-J. (2019) · Cognitive Systems Research · doi:10.1016/j.cogsys.2018.03.002 · Cited by 450
1-D Convolutional Neural Networks for Signal Processing Applications
Kiranyaz, S., Ince, T., Abdeljaber, O., Avci, O., & Gabbouj, M. (2019) · ICASSP 2019 - 2019 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) · doi:10.1109/icassp.2019.8682194 · Cited by 402
“Compact 1D CNNs [14]-[17], [18] [25] are their counterparts that work on 1D signals on those applications which have a limited labeled data and high signal variations acquired from different sources (i.”
BackgroundMethodDeep learning for prognostics and health management: State of the art, challenges, and opportunities
Rezaeianjouybari, B., & Shang, Y. (2020) · Measurement · doi:10.1016/j.measurement.2020.107929 · Cited by 310
Lee, W. J., Wu, H., Yun, H., Kim, H., Jun, M. B. G., & Sutherland, J. W. (2019) · Procedia CIRP · doi:10.1016/j.procir.2018.12.019 · Cited by 263
A Review of Early Fault Diagnosis Approaches and Their Applications in Rotating Machinery
Wei, Y., Li, Y., Xu, M., & Huang, W. (2019) · Entropy · doi:10.3390/e21040409 · Cited by 232
“[169] put the raw vibration signals into a 1D convolutional neural network for a fast and accurate bearing fault detection.”
BackgroundTool wear classification using time series imaging and deep learning
Martínez-Arellano, G., Terrazas, G., & Ratchev, S. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04090-6 · Cited by 225
Guo, S., Zhang, B., Yang, T., Lyu, D., & Gao, W. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2942548 · Cited by 224
“A 1-D CNN (1-D-CNN) [44] is proposed for a bearing fault”
MethodHao, S., Ge, F.-X., Li, Y., & Jiang, J. (2020) · Measurement · doi:10.1016/j.measurement.2020.107802 · Cited by 218
Condition Monitoring and Fault Diagnosis of Induction Motor
Gundewar, S. K., & Kane, P. V. (2021) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-020-00253-y · Cited by 200
Data-driven machinery fault diagnosis: A comprehensive review
Neupane, D., Bouadjenek, M. R., Dazeley, R., & Aryal, S. (2025) · Neurocomputing · doi:10.1016/j.neucom.2025.129588 · Cited by 178
Yoo, Y., & Baek, J.-G. (2018) · Applied Sciences · doi:10.3390/app8071102 · Cited by 180
“The features are inputted into long short-term memory (LSTM) neural networks to construct the HI. Eren [23] also directly inputted the raw signal to a one-dimensional (1-”
Background1D convolutional neural networks and applications: A survey
Kiranyaz, S., Avci, O., Abdeljaber, O., Ince, T., Gabbouj, M., & Inman, D. J. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107398 · Cited by 2,835
Data-Driven Fault Diagnosis for Electric Drives: A Review
Gonzalez-Jimenez, D., del Olmo, J., Poza, J., Garramiola, F., & Madina, P. (2021) · Sensors · doi:10.3390/s21124024 · Cited by 175
“[164] Generic faults Vibration CNN Real data”
Fault Detection and Severity Identification of Ball Bearings by Online Condition Monitoring
Abdeljaber, O., Sassi, S., Avcı, O., Serkan Kiranyaz, B., Ibrahim, A., & Gabbouj, M. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2886789 · Cited by 131
“It is important to note that unlike the previous CNN-based bearing fault detection methods in [34] and [35], which require”
BackgroundMethodInfluentialZar, A., Hussain, Z., Akbar, M., Rabczuk, T., Lin, Z., Li, S., & Ahmed, B. (2024) · International Journal of Mechanics and Materials in Design · doi:10.1007/s10999-023-09692-3 · Cited by 143
Li, H., Huang, J., & Ji, S. (2019) · Sensors · doi:10.3390/s19092034 · Cited by 112
Mehmood, I., Li, H., Qarout, Y., Umer, W., Anwer, S., Wu, H., Hussain, M., & Antwi‐Afari, M. F. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.101978 · Cited by 131
Kumar, R., Andriollo, M., Cirrincione, G., Cirrincione, M., & Tortella, A. (2022) · Energies · doi:10.3390/en15238938 · Cited by 158
Deep Learning Aided Data-Driven Fault Diagnosis of Rotatory Machine: A Comprehensive Review
Mushtaq, S., Islam, M. M. M., & Sohaib, M. (2021) · Energies · doi:10.3390/en14165150 · Cited by 132
“In [31], a method for monitoring bearing health was proposed.”
MethodCentral moment discrepancy based domain adaptation for intelligent bearing fault diagnosis
Li, X., Hu, Y., Zheng, J., Li, M., & Ma, W. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.11.063 · Cited by 107
Luleci, F., Çatbaş, F. N., & Avcı, O. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110370 · Cited by 105
“Recently, due to their high performance in learning the complex data structures, the researchers employed ML and DL algorithms towards SDD problems successfully (Abdeljaber et al. 2017, 2018; Abdeljaber and Avci 2016; Avci et al. 2017; Bandara et al. 2014; Cury and Crémona 2012; Eren 2017; Ghiasi et al. 2016; González…”
BackgroundKim, J.-D., Oh, S., Kim, H., & Choi, W. (2022) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106817 · Cited by 103
Prognostics and Health Management of Industrial Assets: Current Progress and Road Ahead
Biggio, L., & Kastanis, I. (2020) · Frontiers in Artificial Intelligence · doi:10.3389/frai.2020.578613 · Cited by 127
“The literature contains a large number of examples that propose to apply 1D-CNN to bearing (Eren, 2017; Chen et al., 2018; Eren et al., 2019; Qin et al., 2019; Xueyi et al., 2019) and gears (Jing et al.”
BackgroundLuleci, F., Çatbaş, F. N., & Avcı, O. (2022) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-022-00627-8 · Cited by 104
Research on Bearing Fault Diagnosis of Wind Turbine Gearbox Based on 1DCNN-PSO-SVM
Zhang, X., Han, P., Li, X., Zhang, F., Wang, Y., & Gao, L. (2020) · IEEE Access · doi:10.1109/access.2020.3032719 · Cited by 94
“Eren [37] proposed a one-dimensional convolutional neural network (1DCNN) based bearing fault diagnosis, to realize an end-to-end intelligent diagnosis.”
BackgroundLee, C., Jwo, J., Hsieh, H.-Y., & Lin, C.-S. (2020) · IEEE Access · doi:10.1109/access.2020.2982800 · Cited by 94
“The CNNs are one of the many popular models in deep learning, which can serve as an efficient feature extractor for the clas-sification tasks [31], [32].”
BackgroundSingh, J., Azamfar, M., Li, F., & Lee, J. (2020) · Measurement Science and Technology · doi:10.1088/1361-6501/ab8df9 · Cited by 104
Lyu, P., Zhang, K., Yu, W., Wang, B., & Liu, C. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101564 · Cited by 92
Applied Machine Tool Data Condition to Predictive Smart Maintenance by Using Artificial Intelligence
Singh, C., Rao, M. S. S., Mahaboobjohn, Y. M., Kotaiah, B., & Kumar, T. R. (2022) · Communications in computer and information science · doi:10.1007/978-3-031-07012-9_49 · Cited by 84
Du, Y., Liu, Y., Shao, Q., Luo, L., Dai, J., Sheng, G., & Jiang, X. (2019) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2019.2922480 · Cited by 83
“For processing one dimensional signals, one dimensional Convolutional Neural Network (1D CNN) is widely adopted [14], [15].”
MethodBearing Fault Detection Using Scalogram and Switchable Normalization-Based CNN (SN-CNN)
Neupane, D., Kim, Y., & Seok, J. (2021) · IEEE Access · doi:10.1109/access.2021.3089698 · Cited by 91
“D CNN model in [42], which provided 97.1% accuracy.”
MethodInfluentialHe, M., Zhou, Y., Li, Y., Wu, G., & Tang, G. (2020) · Measurement · doi:10.1016/j.measurement.2020.107582 · Cited by 78
Rolling-Element Bearing Fault Diagnosis Using Improved LeNet-5 Network
Wan, L., Chen, Y., Li, H., & Li, C. (2020) · Sensors · doi:10.3390/s20061693 · Cited by 88
“[26,27] developed a bearing fault diagnosis system using the compact adaptive 1D CNN classifier, which directly takes raw vibration signals as input and provides a competitive classification performance.”
MethodGao, Y., Gao, L., Li, X., & Cao, S. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3177662 · Cited by 79
“Eren [21] also proposed a 1-D CNN-based fault diagnosis method, which can reduce computational complexity.”
Fault diagnosis method of rolling bearings based on adaptive modified CEEMD and 1DCNN model
Gao, S., Li, T., Zhang, Y., & Pei, Z. (2023) · ISA Transactions · doi:10.1016/j.isatra.2023.05.014 · Cited by 79
Enhanced bearing fault detection using multichannel, multilevel 1D CNN classifier
Ozcan, I. H., Devecioğlu, Ö. C., İnce, T., Eren, L., & Aşkar, M. (2021) · Electrical Engineering · doi:10.1007/s00202-021-01309-2 · Cited by 82
Self-citationThe Bearing Faults Detection Methods for Electrical Machines—The State of the Art
Khan, M. A., Asad, B., Kudelina, K., Vaimann, T., & Kallaste, A. (2022) · Energies · doi:10.3390/en16010296 · Cited by 89
Liu, X., Xia, L., Shi, J., Zhang, L., Bai, L., & Wang, S. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3265409 · Cited by 72
“For instance, Eren [6] proposed a rapid bearing fault detection system based on 1-”
MethodMehta, A., Goyal, D., Choudhary, A., Pabla, B. S., & Belghith, S. M. (2021) · Mathematical Problems in Engineering · doi:10.1155/2021/9947300 · Cited by 71
“DWT has been accepted as one of the outstanding approaches for the decomposition of thermal images [30].”
BackgroundMethodShan, P., Lv, H. P., Yu, L., Ge, H., Li, Y., & Gu, L. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2020.2980868 · Cited by 71
“Reference [12] used the raw vibration data as the input of the convolutional neural network (CNN) [13].”
MethodZhu, X., Cai, Z., Wu, J., Cheng, Y., & Huang, Q. (2019) · Acta Astronautica · doi:10.1016/j.actaastro.2019.03.072 · Cited by 70
Bhuiyan, M. R., & Uddin, J. (2023) · Vibration · doi:10.3390/vibration6010014 · Cited by 84
“In [94], this research provides a technique for defect diagnostics in building chillers based on transfer learning.”
MethodSharma, A., Zhang, Z., & Rai, R. (2021) · International Journal of Production Research · doi:10.1080/00207543.2021.1930234 · Cited by 75
Toma, R. N., Piltan, F., & Kim, J.-M. (2021) · Sensors · doi:10.3390/s21248453 · Cited by 68
“D CNN in real-time fault diagnosis and it not only achieved high performance but also can eliminate the manual feature extraction phase [50–53].”
BackgroundMamun, M. M. R. K., & Elfouly, T. (2023) · Bioengineering · doi:10.3390/bioengineering10070796 · Cited by 71
Multi-size wide kernel convolutional neural network for bearing fault diagnosis
Kumar, P., Raouf, I., Song, J., Prince, & Kim, H. S. (2024) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2024.103799 · Cited by 61
Enhanced Bearing Fault Diagnosis Through Trees Ensemble Method and Feature Importance Analysis
Alhams, A., Abdelhadi, A., Badri, Y., Sassi, S., & Renno, J. (2024) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-024-01405-0 · Cited by 66
“Eren, L. [17] presented a one-dimensional CNN model to monitor bearings health using a single-learning body model and achieved 97% fault detection accuracy.”
A novel bearing fault diagnosis method using deep residual learning network
Ayas, S., & Ayas, M. Ş. (2022) · Multimedia Tools and Applications · doi:10.1007/s11042-021-11617-1 · Cited by 56
“Eren [9] proposed a bearing fault detection system based on 1D CNN.”
MethodMitra, S., Mukhopadhyay, R., & Chattopadhyay, P. (2022) · Expert Systems with Applications · doi:10.1016/j.eswa.2022.118178 · Cited by 56
Mueller, P. N., Woelfl, L., & Can, S. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106834 · Cited by 58
Barusu, M. R., & Deivasigamani, M. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2020.3004515 · Cited by 55
“The soft-computing techniques such as an artificial neural network (ANN) [18]–[21] neural-fuzzy logic [22], pattern recognition and fuzzy logic [23] have been employed to determine the bearing faults, which analyzes the vibration [9] [24] and current [25], [26] signal of the motor.”
MethodInfluentialFault Diagnosis Method for Rolling Bearings Based on Two-Channel CNN under Unbalanced Datasets
Qin, Y., & Shi, X. (2022) · Applied Sciences · doi:10.3390/app12178474 · Cited by 47
An improved AIC onset-time picking method based on regression convolutional neural network
Li, H., Yang, Z., & Yan, W. Q. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.108867 · Cited by 48
CNN-Based Fault Detection for Smart Manufacturing
Neupane, D., Kim, Y., Seok, J., & Hong, J. (2021) · Applied Sciences · doi:10.3390/app112411732 · Cited by 49
Zhou, F., Han, J., & Yang, X. (2021) · Applied Acoustics · doi:10.1016/j.apacoust.2021.108271 · Cited by 41
A Bearing Fault Diagnosis Method Using Multi-Branch Deep Neural Network
Nguyen, V., Hoang, D.-T., Tran, X.-T., Van, M., & Kang, H. (2021) · Machines · doi:10.3390/machines9120345 · Cited by 39
Ewert, P., Kowalski, C. T., & Orłowska-Kowalska, T. (2020) · Electronics · doi:10.3390/electronics9091334 · Cited by 44
Liu, X., Centeno, J., Alvarado, J., & Tan, L. (2022) · IEEE Access · doi:10.1109/access.2022.3199381 · Cited by 40
“Bearing faults come from roughness fault and single-point fault [32], [39], [40], [41].”
BackgroundMethodKhalil, A. F., & Rostam, S. (2024) · Engineering Technology & Applied Science Research · doi:10.48084/etasr.6813 · Cited by 62
Yang, H.-B., Zhang, J.-A., Chen, L., Zhang, H., & Liu, S. (2019) · Mathematical Problems in Engineering · doi:10.1155/2019/6921975 · Cited by 37
An Explainable and Lightweight Improved 1-D CNN Model for Vibration Signals of Rotating Machinery
Pang, P., Tang, J., Luo, J., Miao, C., Yuan, H., & Jiang, L. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3327783 · Cited by 37
“D vibrational signals [13], [14], [15], [16], [17].”
A self-Adaptive CNN with PSO for bearing fault diagnosis
Chen, J., Jiang, J., Guo, X., & Tan, L. (2020) · Systems Science & Control Engineering · doi:10.1080/21642583.2020.1860153 · Cited by 37
“Bearing faults are categorized into two types: generalized roughness fault and single-point fault (Eren, 2017; Stack et al., 2004).”
BackgroundA new model for bearing spall size estimation based on oil debris
Madar, E., Galiki, O., Klein, R., Bortman, J., Nickell, J. T., & Kirsch, M. S. (2021) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2021.106011 · Cited by 35
Namdari, H., Haghighi, A., & Ashrafi, S. M. (2023) · Stochastic Environmental Research and Risk Assessment · doi:10.1007/s00477-023-02565-3 · Cited by 41
“Recently, a mod-ified version of 2D CNN called 1D Convolutional Neural Networks (1D CNNs) had been developed (Kiranyaz et al. 2021; Kiranyaz et al. 2018; Kiranyaz et al. 2015; Eren 2017; Azizjon et al. 2020).”
Tayyab, S. M., Chatterton, S., & Pennacchi, P. (2022) · Sensors · doi:10.3390/s22052026 · Cited by 40
“In 1D ‐ CNN model raw vibration data can be directly used as input to the model such as used by Eren et al. [36,37].”
MethodZhang, H., Che, W., Cao, Y., Guan, Z., & Zhu, C. (2024) · Iranian Journal of Science and Technology Transactions of Mechanical Engineering · doi:10.1007/s40997-024-00783-w · Cited by 36
“…field of view but also speeds up network computation and To solve the shortcomings of CNN on raw data preprocessing and feature extraction, Leven (Eren 2017) STFT to convert the fault signal into a frequency domain signal, and then utilized 1D-CNN and 2D-CNN to extract the spectrum of the…”
One-dimensional fully decoupled networks for fault diagnosis of planetary gearboxes
Chang, X., Tang, B., Tan, Q., Deng, L., & Zhang, F. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106482 · Cited by 35
Deep Transfer Learning Framework for Bearing Fault Detection in Motors
Kumar, P., Kumar, P., Hati, A. S., & Kim, H. S. (2022) · Mathematics · doi:10.3390/math10244683 · Cited by 33
Diagnosis of Multiple Faults in Rotating Machinery Using Ensemble Learning
Inyang, U. I., Petrunin, I. V., & Jennions, I. K. (2023) · Sensors · doi:10.3390/s23021005 · Cited by 38
“Eren’s [9] and Hsiaso’s [11] results showed decent performance of the 1D CNN models.”
BackgroundMethodAyman, A., Onsy, A., Attallah, O., Brooks, H., & Morsi, I. (2024) · Measurement · doi:10.1016/j.measurement.2024.116589 · Cited by 32
Zhao, X., & Zhang, Y. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac68d1 · Cited by 30
“For example, Erent et al [21] used original vibration signals as input, and trained a kind of one-dimensional CNN (1DCNN) of network for bearing fault diagnosis.”
Shallow Versus Deep Neural Networks in Gear Fault Diagnosis
Cirrincione, G., Kumar, R., Mohammadi, A., Kia, S. H., Barbiero, P., & Ferretti, J. (2020) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2020.2978155 · Cited by 33
“In [24], 3 convolutional layers are used, together with two fully connected layers.”
MethodStamping Monitoring by Using an Adaptive 1D Convolutional Neural Network
Huang, C.-Y., & Dzulfikri, Z. (2021) · Sensors · doi:10.3390/s21010262 · Cited by 32
Lee, S., Yu, H., Yang, H., Song, I., Choi, J., Yang, J., Lim, G.-M., Kim, K., Choi, B.-K., & Kwon, J.-W. (2021) · Applied Sciences · doi:10.3390/app11041564 · Cited by 31
Generative Adversarial Networks for Data Generation in Structural Health Monitoring
Luleci, F., Çatbaş, F. N., & Avcı, O. (2022) · Frontiers in Built Environment · doi:10.3389/fbuil.2022.816644 · Cited by 34
“…there are few studies, including vibration-based unsupervised DL — mostly Autoencoders (Pathirage et al., 2018; Shang et al., 2021; Rastin et al., 2021), and few supervised DL — mostly Convolutional Neural Networks (Abdeljaber et al., 2017, 2018; Eren, 2017; Avci et al., 2017; Yu et al., 2019).”
BackgroundLu, F., Tong, Q., Feng, Z., Wan, Q., An, G., Li, Y., Wang, M., Cao, J., & Guo, T. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac78c5 · Cited by 34
“Besides, considering that the vibration signals are one-dimensional, Eren [26] employed the bearing fault detection method by one-dimensional CNNs (1DCNNs).”
A comprehensive review of mechanical fault diagnosis methods based on convolutional neural network
Hou, J., Lu, X., Zhong, Y., He, W., Zhao, D., & Zhou, F. (2023) · Journal of Vibroengineering · doi:10.21595/jve.2023.23391 · Cited by 36
“Bearing fault identification [72-75], Numerical control Machine tool ball screw pair Fault diagnosis [76], Fault identification of data imbalance [77] Select part of the literature in the above table, respectively investigate the accuracy of the model and the comparison model in the test set, and…”
MethodAbdalla, R., Al-Hakimi, W., Perozo, N., & Jaeger, P. T. (2023) · ACS Omega · doi:10.1021/acsomega.2c07609 · Cited by 31
Cui, X., Zhan, H., Han, K., Yu, J., Wang, R., & Huang, G. (2025) · ISA Transactions · doi:10.1016/j.isatra.2025.05.008 · Cited by 26
Minervini, M., Mognaschi, M. E., Barba, P. D., & Frosini, L. (2021) · Applied Sciences · doi:10.3390/app11177878 · Cited by 25
“Although many works in the literature use 1D CNN with raw bearing vibration data [49,50], the choice of a 2D CNN was made to have a wider availability of pre‐trained at state‐of‐progress networks used in image recognition.”
BackgroundMethodHe, Y., Ma, Y., Huang, K. W., Wang, L., & Zhang, J. (2024) · Measurement · doi:10.1016/j.measurement.2024.114368 · Cited by 22
Cloud Computing for Industrial Predictive Maintenance Based on Prognostics and Health Management
Fila, R., Khaïli, M. E., & Mestari, M. (2020) · Procedia Computer Science · doi:10.1016/j.procs.2020.10.090 · Cited by 27
Sari, A. P., Suzuki, H., Kitajima, T., Yasuno, T., Prasetya, D. A., & Nachrowie, N. (2020) · IEEE International Conference on Power and Energy · doi:10.1109/pecon48942.2020.9314474 · Cited by 34
“1D-CNN is popular solution for wind prediction [4], damage detection [5], fault detection [9] and so on.”
MethodAn Overview of Deep Learning Methods Used in Vibration-Based Damage Detection in Civil Engineering
Avcı, O., Abdeljaber, O., & Serkan Kiranyaz, B. (2021) · Conference proceedings of the Society for Experimental Mechanics · doi:10.1007/978-3-030-77143-0_10 · Cited by 22
Daniyan, I. A., Muvunzi, R., & Mpofu, K. (2021) · Procedia CIRP · doi:10.1016/j.procir.2021.01.138 · Cited by 24
A Transformer Model-Based Approach to Bearing Fault Diagnosis
Bao, Z., Du, J., Zhang, W., Wang, J., Qiu, T., & Cao, Y. (2021) · Communications in computer and information science · doi:10.1007/978-981-16-5940-9_5 · Cited by 24
Senjoba, L., Sasaki, J., Kosugi, Y., Toriya, H., Hisada, M., & Kawamura, Y. (2021) · Mining · doi:10.3390/mining1030019 · Cited by 19
“Eren [16] proposed an adaptive implementation of one-dimensional (1D) CNN for bearing health monitoring.”
A New Fault Diagnosis Method for Unbalanced Data Based on 1DCNN and L2-SVM
Hu, B., Liu, J., Zhao, R., Xu, Y., & Huo, T. (2022) · Applied Sciences · doi:10.3390/app12199880 · Cited by 23
Zhao, C., Sun, J., Lin, S., & Peng, Y. (2021) · Sensors · doi:10.3390/s21165494 · Cited by 19
Hou, L., Liu, L., & Mao, G. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3206764 · Cited by 18
“D CNN [12], adaptive 1-”
Deep Belief Network and Dempster-Shafer Evidence Theory for Bearing Fault Diagnosis
Hoang, D.-T., & Kang, H. J. (2018) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2018.8433778 · Cited by 18
“In the case of CNN, the classification results are 51.5, 51.5, 62.5, 78.25, 90% respectively.”
BackgroundMethodInfluentialKim, K., & Kim, Y. S. (2024) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-024-1010-3 · Cited by 19
“Condition diagnosis was performed by Eren [10] by direct input of raw data into a 1D CNN model, without employing separate preprocessing techniques or feature extraction algorithms.”
Deng, L., Xu, S., Wang, W., & Xiang, C. (2022) · Measurement · doi:10.1016/j.measurement.2022.110868 · Cited by 17
Bearing Fault Diagnosis Based on Artificial Intelligence Methods: Machine Learning and Deep Learning
Ghorbel, A., Eddai, S., Limam, B., Féki, N., & Haddar, M. (2024) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-024-09488-3 · Cited by 24
“Recently, there has been a substantial increase in the use of deep learning, which is a type of machine learning that is competent not only at sorting things into categories with more accuracy, both in broad and in specific terms, but also at handling lots of data [42].”
Metadata
- Authors
- Eren, L.
- Affiliations
- İzmir University of Economics (TR)
- Corresponding author
- Eren, Levent
- ORCID
- Eren, Levent
- Venue
- Mathematical Problems in Engineering
- Publisher
- Wiley
- Published
- 2017-01
- Volume
- 2017
- Issue
- 1
- ISSN
- 1024-123X (ISSN-L)
- 1563-5147
- OpenAlex
- W2737404945
- Cited by
- 250
- References
- 36
- Citations by year
- 2026: 12 · 2025: 31 · 2024: 38 · 2023: 23 · 2022: 40 · 2021: 41 · 2020: 35 · 2019: 22 · 2018: 8
- FWCI
- 11.17
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Mathematical Problems in Engineering (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical Fault Detection and Protection
- Keywords
- bearing fault detection, 1D convolutional neural network, vibration signal analysis, end-to-end feature extraction, computational complexity reduction, real-time fault diagnosis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.