A New Steel Defect Detection Algorithm Based on Deep Learning
Open accessThe DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index; 5 of the 15 sources its claims cite were checked for support.
Abstract
In recent years, more and more scholars devoted themselves to the research of the target detection algorithm due to the continuous development of deep learning. Among them, the detection and recognition of small and complex targets are still a problem to be solved. The authors of this article have understood the shortcomings of the deep learning detection algorithm in detecting small and complex defect targets and would like to share a new improved target detection algorithm in steel surface defect detection. The steel surface defects will affect the quality of steel seriously. We find that most of the current detection algorithms for NEU-DET dataset detection accuracy are low, so we choose to verify a steel surface defect detection algorithm based on machine vision on this dataset for the problem of defect detection in steel production. A series of improvement measures are carried out in the traditional Faster R-CNN algorithm, such as reconstructing the network structure of Faster R-CNN. Based on the small features of the target, we train the network with multiscale fusion. For the complex features of the target, we replace part of the conventional convolution network with a deformable convolution network. The experimental results show that the deep learning network model trained by the proposed method has good detection performance, and the mean average precision is 0.752, which is 0.128 higher than the original algorithm. Among them, the average precision of crazing, inclu…
Overview
CoChat Summary
TL;DR
The paper proposes an improved Faster R-CNN for steel surface defect detection by adding deformable convolution, deformable ROI pooling, FPN multiscale fusion, and soft NMS. On the NEU-DET dataset, it reports a mean average precision of 0.752, which is 0.128 higher than the original algorithm.
Key findings
- On NEU-DET, the proposed method achieves mAP = 0.752, which is 0.128 higher than the original algorithm.
- Reported per-class APs are 0.501 (crazing), 0.791 (inclusion), 0.792 (patches), 0.874 (pitted_surface), 0.649 (rolled-in_scale), and 0.905 (scratches).
- In the ablation study, the original Faster R-CNN reaches 62.4% overall mean average accuracy; adding ResNet-50 raises it by 1.9%, adding deformable convolution raises it by 9% over the original, adding FPN raises it by 12.1%, and the full proposed scheme improves by 10.9%, 3.8%, and 0.7% compared with Schemes 2–4.
- Compared with other detectors, the paper states the proposed algorithm’s mean average accuracy is 24.2%, 14.6%, and 12.6% higher than SSD, RetinaNet, and Cascade R-CNN, respectively.
Methods
- The model is based on Faster R-CNN and modifies the feature extractor with ResNet-50, deformable convolution, and deformable ROI pooling; it also adds FPN and soft NMS.
- Experiments are conducted on NEU-DET, described as an open dataset from Northeast University with 1800 pictures total and 300 pictures of six kinds of defects.
- Performance is evaluated using AP for each defect class and mAP for the overall model; ablation experiments compare five schemes, and the model is also compared with SSD, RetinaNet, and Cascade R-CNN.
Limitations
- The paper states that the detection time is long and says the algorithm should be further optimized to reduce detection time.
- The paper states that the processed images “could be affected by uncertainty” and suggests using soft computing technology in future research.
- The text makes evident that crazing/small targets remain challenging, since it notes fuzzy, small-sized crazing defects and “a small number of missed detection” — this is inferred from the results discussion, not stated as a formal limitation.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures











Verification
Claims the paper makes
3 Valid · 6 Not valid · 2 Not checked · 37 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“Dai et al. [36] introduced deformable convolution and deformable pooling into convolution neural network to enhance the modeling ability of the network.”
§ A New Steel Defect Detection Algorithm Based on Deep Learning > 2. Steel Defect Detection Method > 2.3. Deformable Network
What the sources say
- Supportedcites [36] source
The Abstract (p. 1) says the authors introduce deformable convolution and deformable RoI pooling to enhance CNNs’ transformation-modeling capability. Section 2.1 (p. 2) explains that both modules can replace their standard counterparts in deep CNNs. The citing sentence’s “deformable pooling” is a reasonable shorthand for deformable RoI pooling. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“There are some shortcomings in manual testing, such as low confidence and high labor intensity.”
§ A New Steel Defect Detection Algorithm Based on Deep Learning > 1. Introduction
What the sources say
- Not checked — no full text of the sourcecites [2] source
- Not checked — no full text of the sourcecites [3] source
- Not checked — no full text of the sourcecites [4] source
- Not checked — no full text of the sourcecites [5] source
- Partly supportedcites [6] sourceExperimental — accuracy not yet measured
The Discussion (page unavailable) says manually labeling light-trap insects is a large task, which supports the labor-intensity point in a different setting. The paper does not address manual inspection of steel surfaces or say that manual testing has low confidence. (LLM, conf=0.78)
- Not checked — no full text of the sourcecites [7] source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The reduction range of the prediction accuracy of dense targets nearby is determined by soft NMS in light of the intersection over union (IOU) [36] of the highest score box, so as to improve the prediction accuracy of dense targets.”
§ A New Steel Defect Detection Algorithm Based on Deep Learning > 2. Steel Defect Detection Method > 2.5. Soft Nonmaximum Suppression Nonmaximum suppression (NMS) is used as a postprocessing method commonly to eliminate duplicate frames and reduce the false detection rate in the target detection. However, other similar targets attached to the box with higher prediction score are removed by the NMS, which will lead to missed detection and false detection of similar targets with close proximity and overlapping. The reduction range of the prediction accuracy of dense targets nearby is determined by soft NMS in light of the intersection over union (IOU) [36] of the highest score box, so as to improve the prediction accuracy of dense targets. For example, the IOU of the detection frames A and B [35] is the following:(5)IOU=A∩BA∪B=SUSA+SB−SU,where SA, SB are the areas of the detection frame A and B, respectively, and SU is the overlapping area of the detection frames A and B. The expressions of traditional NMS and Soft NMS algorithms are as follows [35]:(6)Si=Si, IOUM, bi< Nt,0, IOUM,bi ≥ Nt,(7)Si=Si, IOUM,bi< Nt,Si1−IOUM, bi, IOUM,bi≥ Nt,where Si is the score of the detection box i, M is the maximum score box, bi is the collection of detection frames i, Nt is the threshold set. The NMS sets the score of the detection frame whose IOU is greater than the threshold value to 0, while the soft NMS attenuates the score of the detection frame whose IOU is greater than the threshold value, which can alleviate the problems of missed detection and false detection of targets. The IOU threshold of soft NMS is 0.5 and the minimum score is 0.05.
What the sources say
- Could not verifycites [36] sourceExperimental — accuracy not yet measured
Section 4.1 (p. 7) mentions IoU only as a threshold for evaluating detection results. Sections 4.2–4.3 (pp. 8–9) report accuracy gains from deformable ConvNets, not from soft NMS. Searches for soft NMS, highest-scoring boxes, and IoU-based score reduction found no passage addressing the attributed mechanism or its effect on nearby dense targets. (LLM, conf=0.77)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“mean average precision is 0.752, which is 0.128 higher than the original algorithm.”
§ A New Steel Defect Detection Algorithm Based on Deep Learning > Abstract In recent years, more and more scholars devoted themselves to the research of the target detection algorithm due to the continuous development of deep learning. Among them, the detection and recognition of small and complex targets are still a problem to be solved. The authors of this article have understood the shortcomings of the deep learning detection algorithm in detecting small and complex defect targets and would like to share a new improved target detection algorithm in steel surface defect detection. The steel surface defects will affect the quality of steel seriously. We find that most of the current detection algorithms for NEU-DET dataset detection accuracy are low, so we choose to verify a steel surface defect detection algorithm based on machine vision on this dataset for the problem of defect detection in steel production. A series of improvement measures are carried out in the traditional Faster R-CNN algorithm, such as reconstructing the network structure of Faster R-CNN. Based on the small features of the target, we train the network with multiscale fusion. For the complex features of the target, we replace part of the conventional convolution network with a deformable convolution network. The experimental results show that the deep learning network model trained by the proposed method has good detection performance, and the mean average precision is 0.752, which is 0.128 higher than the original algorithm. Among them, the average precision of crazing, inclusion, patches, pitted surface, rolled in scale and scratches is 0.501, 0.791, 0.792, 0.874, 0.649, and 0.905, respectively. The detection method is able to identify small target defects on the steel surface effectively, which can provide a reference for the automatic detection of steel defects.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“mean average precision is 0.752, which is 0.128 higher than the original algorithm.”
- Also stated in: § 2.7. Analysis of Experimental Results · plain
“the overall mean average accuracy is 75.2%.”
§ A New Steel Defect Detection Algorithm Based on Deep Learning > Abstract In recent years, more and more scholars devoted themselves to the research of the target detection algorithm due to the continuous development of deep learning. Among them, the detection and recognition of small and complex targets are still a problem to be solved. The authors of this article have understood the shortcomings of the deep learning detection algorithm in detecting small and complex defect targets and would like to share a new improved target detection algorithm in steel surface defect detection. The steel surface defects will affect the quality of steel seriously. We find that most of the current detection algorithms for NEU-DET dataset detection accuracy are low, so we choose to verify a steel surface defect detection algorithm based on machine vision on this dataset for the problem of defect detection in steel production. A series of improvement measures are carried out in the traditional Faster R-CNN algorithm, such as reconstructing the network structure of Faster R-CNN. Based on the small features of the target, we train the network with multiscale fusion. For the complex features of the target, we replace part of the conventional convolution network with a deformable convolution network. The experimental results show that the deep learning network model trained by the proposed method has good detection performance, and the mean average precision is 0.752, which is 0.128 higher than the original algorithm. Among them, the average precision of crazing, inclusion, patches, pitted surface, rolled in scale and scratches is 0.501, 0.791, 0.792, 0.874, 0.649, and 0.905, respectively. The detection method is able to identify small target defects on the steel surface effectively, which can provide a reference for the automatic detection of steel defects.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 2.7. Analysis of Experimental Results · plain
12 more claims
Create a free account to see all 48 claims and every source verdict.
- It may state two separate claims as one. 24
- Probably not a substantial claim. 8
- The quote only partly states this claim. 3
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ A New Steel Defect Detection Algorithm Based on Deep Learning > 2. Steel Defect Detection Method > 2.7. Analysis of Experimental Results
“It is not hard to see that the average accuracy of “scratch” is the highest and the “pitted_ surface” is the second in Table 3, which can reach 90.5% and 87.4%, respectively. The average accuracy of “crashing” is the lowest, which is 50.1%, and the overall mean average accuracy is 75.2%.”
§ A New Steel Defect Detection Algorithm Based on Deep Learning > Abstract
“Among them, the average precision of crazing, inclusion, patches, pitted surface, rolled in scale and scratches is 0.501, 0.791, 0.792, 0.874, 0.649, and 0.905, respectively.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ A New Steel Defect Detection Algorithm Based on Deep Learning > 2. Steel Defect Detection Method > 2.8. Ablation Experiments
“The five specific schemes in Table 4 are as follows:Scheme 1 is the original Faster R-CNN model.Scheme 2 uses ResNet-50 as the feature extraction network of Faster R-CNN.Scheme 3 introduces a deformable network on the basis of ResNet-50 as the feature extraction network of Faster R-CNN.Scheme 4 adds the feature pyramid network on the basis of Scheme 5.Scheme 5 replaces nonmaximum suppression scheme with a soft nonmaximum on the basis of Scheme 4.”
§ A New Steel Defect Detection Algorithm Based on Deep Learning > 2. Steel Defect Detection Method > 2.8. Ablation Experiments
“The final test results of the four schemes are shown in Figure 11.”
Citations
Cites
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2016) · 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2016.90 · Cited by 235,474 · cited 1×
“At the first, the ResNet-50 [21–24] network is reconstructed by deformable convolution as the prefeature extraction network of Faster R-CNN [25–27].”
MethodFaster R-CNN: Towards Real-Time Object Detection with Region Proposal Networks
Ren, S., He, K., Girshick, R., & Sun, J. (2017) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2577031 · Cited by 73,472 · cited 1×
“At the first, the ResNet-50 [21–24] network is reconstructed by deformable convolution as the prefeature extraction network of Faster R-CNN [25–27].”
Method(2016) · Cited by 31,590
Feature Pyramid Networks for Object Detection
Lin, T.-Y., Dollar, P., Girshick, R., He, K., Hariharan, B., & Belongie, S. (2017) · 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2017.106 · Cited by 30,939 · cited 1×
“Finally, the FPN [28–30] network is used for multifeature fusion, and the soft non-maximum suppression (soft NMS) [31] is used to reduce the confidence of the detection frame larger than the threshold, so as to alleviate the situation of the target missing detection.”
MethodSSD: Single Shot MultiBox Detector
Liu, W., Anguelov, D., Erhan, D., Szegedy, C., Reed, S., Fu, C.-Y., & Berg, A. C. (2016) · Lecture Notes in Computer Science · doi:10.1007/978-3-319-46448-0_2 · Cited by 22,128
Focal Loss for Dense Object Detection
Lin, T.-Y., Goyal, P., Girshick, R., He, K., & Dollar, P. (2020) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2018.2858826 · Cited by 9,556 · cited 1×
“…other mainstream target detection algorithms in order to further verify the advantages of the proposed algorithm, as shown in Table 6. comparison algorithms include single-stage target detection algorithms SSD and RetinaNet [38, 39] and double-stage target detection algorithm Cascade R-CNN [40].”
MethodDeformable Convolutional Networks
Dai, J., Qi, H., Xiong, Y., Li, Y., Zhang, G., Hu, H., & Wei, Y. (2017) · 2017 IEEE International Conference on Computer Vision (ICCV) · doi:10.1109/iccv.2017.89 · Cited by 7,513 · cited 5×
“To solve the above problems, Dai et al. [36] introduced deformable convolution and deformable pooling into convolution neural network to enhance the modeling ability of the network. end-to-end training is carried out through standard backpropagation to generate a deformable convolution network.”
BackgroundMethodInfluentialSoft-NMS — Improving Object Detection with One Line of Code
Bodla, N., Singh, B., Chellappa, R., & Davis, L. S. (2017) · 2017 IEEE International Conference on Computer Vision (ICCV) · doi:10.1109/iccv.2017.593 · Cited by 2,274 · cited 1×
“Finally, the FPN [28–30] network is used for multifeature fusion, and the soft non-maximum suppression (soft NMS) [31] is used to reduce the confidence of the detection frame larger than the threshold, so as to alleviate the situation of the target missing detection.”
MethodAn End-to-End Steel Surface Defect Detection Approach via Fusing Multiple Hierarchical Features
He, Y., Song, K., Meng, Q., & Yan, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2915404 · Cited by 1,341 · cited 1×
“…of several common defects on the steel surface are shown in Figure 1, including crazing, inclusions, patches, and pitted surface, rolled in scale and scratches. traditional steel surface defect detection [2–4] is completed by manual visual inspection combined with traditional machine vision [5–7].”
MethodDeep Metallic Surface Defect Detection: The New Benchmark and Detection Network
Lv, X., Duan, F., Jiang, J.-J., Fu, X., & Gan, L. (2020) · Sensors · doi:10.3390/s20061562 · Cited by 643 · cited 1×
“Lv et al. [16] proposed a new end-to-end defect detection network (EDDN) to deal with different types of steel surface defects.”
BackgroundDetecting Affect States Using VGG16, ResNet50 and SE-ResNet50 Networks
Theckedath, D., & Sedamkar, R. R. (2020) · SN Computer Science · doi:10.1007/s42979-020-0114-9 · Cited by 634
Dong, H., Song, K., He, Y., Xu, J., Yan, Y., & Meng, Q. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2958826 · Cited by 559 · cited 1×
“Therefore, the steel surface defect detection method based on deep learning is widely used in steel production, and more scholars begin to improve and perfect it [13, 14].”
MethodEDRNet: Encoder–Decoder Residual Network for Salient Object Detection of Strip Steel Surface Defects
Song, G., Song, K., & Yan, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3002277 · Cited by 309 · cited 1×
“Song et al. [18] proposed a new saliency detection method based on an encoder-decoder residual network (EDR-Net).”
MethodA deep-learning-based approach for fast and robust steel surface defects classification
Fu, G., Sun, P., Zhu, W., Yang, J., Cao, Y., Yang, M. Y., & Cao, Y. (2019) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2019.05.005 · Cited by 271 · cited 1×
“[15] proposed a convolutional neural network model which emphasizes the training of the underlying features and realized the rapid and accurate classification of steel surface defects by combining with multiple receptive fields.”
BackgroundDeep Convolution Neural Networks in Computer Vision: a Review
Yoo, H.-J. (2015) · IEIE Transactions on Smart Processing and Computing · doi:10.5573/ieiespc.2015.4.1.035 · Cited by 173
Automated Visual Defect Classification for Flat Steel Surface: A Survey
Luo, Q., Fang, X., Su, J., Zhou, J., Zhou, B., Yang, C., Liu, L., Gui, W., & Tian, L. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3030167 · Cited by 148 · cited 1×
“+erefore, the steel surface defect detection method based on deep learning is widely used in steel production, and more scholars begin to improve and perfect it [13, 14].”
MethodYan, J., Wang, H., Yan, M., Diao, W., Sun, X., & Li, H. (2019) · Remote Sensing · doi:10.3390/rs11030286 · Cited by 147 · cited 3×
“In this paper, a steel defect detection algorithm based on the deformable network [35] and multiscale feature fusion is proposed.”
BackgroundMethodInfluentialAfif, M., Ayachi, R., Said, Y., Pissaloux, E. E., & Atri, M. (2020) · Neural Processing Letters · doi:10.1007/s11063-020-10197-9 · Cited by 132 · cited 3×
“It can be seen that the overall mean average accuracy of defects in SSD algorithm is only 51.0% from the data in Table 6, which cannot identify multiple defects effectively. overall mean average accuracies of RetinaNet and Cascade R-CNN algorithms are all about 10% higher than that of SSD algorithm. proposed algorithm…”
MethodInfluentialPeng, J., Wang, D., Liao, X., Shao, Q., Sun, Z., Yue, H., & Ye, H. (2020) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/j.isprsjprs.2020.08.026 · Cited by 105
Tree extraction from multi-scale UAV images using Mask R-CNN with FPN
Öçer, N. E., Kaplan, G., Erdem, F., Matcı, D. K., & Avdan, U. (2020) · Remote Sensing Letters · doi:10.1080/2150704x.2020.1784491 · Cited by 103 · cited 1×
“Finally, the FPN [28–30] network is used for multifeature fusion, and the soft non-maximum suppression (soft NMS) [31] is used to reduce the confidence of the detection frame larger than the threshold, so as to alleviate the situation of the target missing detection.”
MethodChatterjee, A., Fournier, R., Naït-Ali, A., & Siarry, P. (2010) · HAL · Cited by 97
Microstructure evolution and corrosion behavior of dissimilar 304/430 stainless steel welded joints
Wang, C., Yu, Y., Yu, J., Zhang, Y., Zhao, Y., & Yuan, Q. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.12.015 · Cited by 93
Development of an automatic monitoring system for rice light-trap pests based on machine vision
YAO, Q., FENG, J., TANG, J., XU, W.-G., ZHU, X.-H., YANG, B.-J., LÜ, J., XIE, Y.-Z., YAO, B., WU, S.-Z., et al. (2020) · Journal of Integrative Agriculture · doi:10.1016/s2095-3119(20)63168-9 · Cited by 76
Steel-surface defect detection using a switching-lighting scheme
Jeon, Y.-J., Choi, D.-C., Lee, S. J., Yun, J. P., & Kim, S. W. (2016) · Applied Optics · doi:10.1364/ao.55.000047 · Cited by 61 · cited 1×
“…of several common defects on the steel surface are shown in Figure 1, including crazing, inclusions, patches, and pitted surface, rolled in scale and scratches. traditional steel surface defect detection [2–4] is completed by manual visual inspection combined with traditional machine vision [5–7].”
MethodAdaptive Image Contrast Enhancement by Computing Distances into a 4-Dimensional Fuzzy Unit Hypercube
Versaci, M., Morabito, F. C., & Angiulli, G. (2017) · IEEE Access · doi:10.1109/access.2017.2776349 · Cited by 51 · cited 1×
“Therefore, it is necessary to use soft computing technology to improve image quality [41] in the future research.”
BackgroundAutomated surface inspection for steel products using computer vision approach
Xi, J., Shentu, L., Hu, J., & Li, M. (2017) · Applied Optics · doi:10.1364/ao.56.000184 · Cited by 40
Vannocci, M., Ritacco, A., Castellano, A., Galli, F., Vannucci, M., Iannino, V., & Colla, V. (2019) · Lecture notes in computer science · doi:10.1007/978-3-030-20518-8_19 · Cited by 35 · cited 1×
“[17] discussed the improved methods of steel surface defect detection and classification by comparing the traditional machine learning model and deep learning model in steel defect classification.”
MethodYuan, J., Fan, Y., Lv, X., Chen, C., Li, D., Hong, Y., & Wang, Y. (2020) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1576/1/012040 · Cited by 26
Self-citationFeng, T., Liu, J., Fang, X., Wang, J., & Zhou, L. (2020) · Sensors · doi:10.3390/s20082360 · Cited by 25
Pointer Defect Detection Based on Transfer Learning and Improved Cascade-RCNN
Zhao, W., Huang, H., Li, D., Chen, F., & Cheng, W. (2020) · Sensors · doi:10.3390/s20174939 · Cited by 23 · cited 2×
“…detection, and r is the value of recall ( R ). definition of recall rate is shown in formula (10), ρ interp ( r ) can be expressed as formula (11) [37], 6 Computational Intelligence and Neuroscience j is the category index, n j is the total number of categories, and AP j is the average precision…”
MethodSelf-citationTakino, H., & Hosaka, T. (2014) · Applied Optics · doi:10.1364/ao.53.008002 · Cited by 20
Han, C., Li, G., Ding, Y., et al. (2020) · Sensors · doi:10.3390/s20164353 · Cited by 19
A Review on Object Detection Based on Deep Convolutional Neural Networks for Autonomous Driving
Lu, J., Tang, S., Wang, J., Zhu, H., & Wang, Y. (2019) · 2019 Chinese Control And Decision Conference (CCDC) · doi:10.1109/ccdc.2019.8832398 · Cited by 17 · cited 1×
“There are some short-comings in manual testing, such as low confidence and high labor intensity. traditional target detection [8] selects candidate regions on a given image; then, the features are extracted manually and the trained classifier is used for classification. method has high time complexity…”
MethodInnovative Fuzzy Techniques for Characterizing Defects in Ultrasonic Nondestructive Evaluation
Versaci, M., Calcagno, S., Cacciola, M., et al. (2014) · Springer eBooks · doi:10.1007/978-3-319-10566-6_7 · Cited by 15 · cited 1×
“Versaci et al. [12] was committed to the development of ultrasonic nonde-structive testing and classification technology based on the continuous wave and proposed a fuzzy similarity based method. above detection and classification methods for steel surface defects are mainly to extract the shallow…”
MethodWeakly- and Semi-Supervised Fast Region-Based CNN for Object Detection
Wang, X.-G., Wang, J.-S., Tang, P., & Liu, W.-Y. (2019) · Journal of Computer Science and Technology · doi:10.1007/s11390-019-1975-z · Cited by 8 · cited 1×
“Faster R-CNN is the mainstream two-stage target detection algorithm, which is used in face detection and defect detection widely. detection accuracy of Faster R-CNN is higher than SSD [32, 33], Fast R-CNN [34], and other algorithms verified on multiple datasets.”
MethodData security concurrent with homogeneous by AES algorithm in SSD controller
Fan, L., Luo, J., Liu, H., & Geng, X. (2014) · IEICE Electronics Express · doi:10.1587/elex.11.20140535 · Cited by 7 · cited 1×
“Faster R-CNN is the mainstream two-stage target detection algorithm, which is used in face detection and defect detection widely. detection accuracy of Faster R-CNN is higher than SSD [32, 33], Fast R-CNN [34], and other algorithms verified on multiple datasets.”
MethodApplication of Cascade R-CNN and YOLOv3 in Missile Target Recognition
刘, 志. (2020) · Journal of Image and Signal Processing · doi:10.12677/jisp.2020.92013 · Cited by 5 · cited 1×
“…other mainstream target detection algorithms in order to further verify the advantages of the proposed algorithm, as shown in Table 6. comparison algorithms include single-stage target detection algorithms SSD and RetinaNet [38, 39] and double-stage target detection algorithm Cascade R-CNN [40].”
MethodResearch on the Technology of Searching for Fashion Trend Image Based on ResNet50 Model
Tian, Y., Zheng, Z., Li, G., et al. (2020) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1642/1/012011 · Cited by 2
Research works printed but not linked: 5
- Sun B., 2010, Classification and formation mechanism of typical press in scale of hot rolled steel plate, Journal of Northeastern University (Natural Science), 31, 1417
- Qu E., 2017, Improved Gabor filter for detection of strip surface defects, Journal of Huazhong University of Science and Technology (Natural Science Edition), 45, 12
- Xu S., 2017, Design of surface defect detection system for cold rolled strip, Instrument Technique and Sensor, 1, 65
- Wang H., 2020, Research on surface defect detection of metal sheet and strip based on multi-level feature Faster R-CNN, Mechanical Science and Technology for Aerospace Engineering, 2020
- Dai X., 2020, Research on surface defect detection and implementation of metal workpiece based on improved Faster R-CNN, Surface Technology, 49, 362
Cited by
Mixed local channel attention for object detection
Wan, D., Lu, R., Shen, S., Xu, T., Lang, X., & Ren, Z. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106442 · Cited by 431
DCC-CenterNet: A rapid detection method for steel surface defects
Tian, R., & Jia, M. (2022) · Measurement · doi:10.1016/j.measurement.2021.110211 · Cited by 222
Steel Surface Defect Recognition: A Survey
Wen, X., Shan, J., He, Y., & Song, K. (2022) · Coatings · doi:10.3390/coatings13010017 · Cited by 210
MSC-DNet: An efficient detector with multi-scale context for defect detection on strip steel surface
Liu, R., Huang, M., Gao, Z., Cao, Z., & Cao, P. (2023) · Measurement · doi:10.1016/j.measurement.2023.112467 · Cited by 159
Ma, Y., Yin, J., Huang, F. C., & Li, Q. (2024) · Artificial Intelligence Review · doi:10.1007/s10462-024-10956-3 · Cited by 265
“In 2021, Zhao et al. (2021b ) made progress in refining the Faster R-CNN algorithm, crafting an innovative approach tailored for steel surface defect detection.”
Metadata
- Authors
- Zhao, W., Chen, F., Huang, H., Li, D., & Cheng, W.
- Affiliations
- Anhui University of Technology (CN)
- Corresponding author
- Chen, Feng
- Venue
- Computational Intelligence and Neuroscience
- Publisher
- Wiley
- Published
- 2021-01
- Volume
- 2021
- Issue
- 1
- Pages
- 5592878-5592878
- ISSN
- 1687-5265 (ISSN-L)
- 1687-5273
- PMC
- PMC8007367
- OpenAlex
- W3137333070
- Semantic Scholar
- 5cda88f64395289d1745069e80381e365cd76309
- Cited by
- 259
- References
- 38
- Citations by year
- 2026: 31 · 2025: 62 · 2024: 76 · 2023: 53 · 2022: 28 · 2021: 9
- FWCI
- 21.42
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Computational Intelligence and Neuroscience (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- Opening Project of Key Laboratory of Power Electronics and Motion Control of Anhui Higher Education Institutions (PEMC1902)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Keywords
- steel surface defect detection, small object detection, Faster R-CNN, multi-scale feature fusion, deformable convolution, NEU-DET dataset, machine vision, inclusion detection
- MeSH terms
- Deep Learning, Algorithms, Rotation, Steel, Neural Networks, Computer
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.