CoChat

Optimization Analysis of Vibration Reduction for Large‐Span Steel Pedestrian Bridges Based on Tuned Mass Damper Inerter System

Open access
Song, Rong-Fang, Wang, Jin-Long, Yang, Zi-Sheng, Ma, Shi-Ju · 2025 · Advances in Civil Engineering

The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index; 2 of the 10 sources its claims cite were checked for support.

Abstract

Aiming at the problem of the narrow damping frequency band of traditional single‐tuned mass damper (STMD), this paper proposes multiple‐tuned mass dampers (MTMDs) and six different configurations of tuned mass damper inerter systems (TMDI‐Ⅰ–TMDI‐VI) for vibration suppression optimization. A long‐span steel truss footbridge was selected as the research object, a vibration simulation model of a single‐degree‐of‐freedom pedestrian bridge‐damping system was established by Matlab Simulink, and the vibration damping effects of STMD, MTMD, and six TMDI damping systems under human‐induced excitation were compared and analyzed. The results indicate that the damping effect of MTMD is better than that of STMD when the self‐oscillating frequency of the footbridge is deviated, and its robustness is further improved with the increase in the number of MTMD subunits n. The damping effect of the six TMDI damping systems varies greatly, among which TMDI-III has the best damping effect and robustness, when |λ| = 5%, the damping rate α of the TMDI‐III damping system is still able to increase by 8.3% compared with that of STMD. The research results can provide theoretical support for the vibration reduction control of large‐span steel truss footbridge.

Overview

CoChat Summary

TL;DR

This paper compares single-tuned mass damper (STMD), multiple-tuned mass dampers (MTMDs), and six tuned mass damper inerter (TMDI) configurations for vibration control of a 123 m steel truss pedestrian bridge under pedestrian-induced excitation. It finds MTMD is more robust than STMD when the bridge frequency deviates, and TMDI-III gives the best damping and robustness among the six TMDI configurations.

Key findings

  • Under the same mass ratio, n-MTMD is not superior to STMD when the main structure’s natural frequency does not deviate, but MTMD performs better than STMD when the frequency deviates; robustness improves as the number of MTMD subunits n increases. Specifically, 3-MTMD is better than STMD when |λ| ≥ 2%, 5-MTMD is better regardless of λ, and 7-MTMD and 3-MTMD are better than STMD when |λ| ≥ 2%.
  • The six TMDI configurations differ greatly. TMDI-III has the best damping effect and robustness; at |λ| = 5%, its damping rate α is still 8.3% higher than STMD. TMDI-I also remains better than STMD at |λ| = 5%, with α 1.7% higher.
  • TMDI-II and TMDI-V are weaker than STMD at larger deviations: at |λ| = 5%, TMDI-II has α = 60.4%, a decrease of 7.5% compared with STMD, and TMDI-V has α = 55.0%, a decrease of 12.9%. TMDI-IV and TMDI-VI are stable for |λ| ≤ 2% (α decreases of only 0.8% and 2.1% versus central frequency), but at |λ| = 5% their peak acceleration exceeds STMD, with α decreases of 0.5% and 1.7%.
  • Model validation against Midas Civil gave STMD damping rates α of 85.85% for Matlab Simulink and 81.79% for Midas Civil, a difference of 4.72%.

Methods

  • The case study is the XuanYue Bridge, a large-span simply supported steel truss pedestrian bridge with a 123 m span, 9 m cantilevers on each side, total length 155 m, deck width from 8.0 m at the abutment to 10.1 m at midspan, depth 1.5 m, and Q355D steel. A Midas Civil finite element model used beam elements for truss members, plate elements for deck panels, and Lanczos modal eigenvalue calculation; in situ dynamic tests showed a maximum deviation rate between measured and calculated natural frequencies of less than 6.2%.
  • The bridge-damping system was simplified to a single-degree-of-freedom model in Matlab Simulink. Human-induced excitation followed EN03 (2007): Fv(t) = P × cos(2π f_s t) × n0 φ, with P = 280 N, crowd density n = 1.5 people/m², f_s = 1.47 Hz, and φ = 0.55.
  • STMD, MTMD (n = 3, 5, 7; η = 0.15), and six TMDI configurations were compared under mass ratio μ = 0.01. The analysis compared peak acceleration and damping rate α under deviations λ of the main structure resonance frequency to assess damping effectiveness and robustness.

Limitations

  • The paper states that the Matlab Simulink model simplifies the controlled main structure to a single-degree-of-freedom system, while real pedestrian bridge vibration under human-induced excitation is produced by coupling of multiple modalities; the simulation neglects higher natural modes.
  • The paper states that for TMDI configurations IV, V, and VI, the added spring element k_t1 leads to higher-order equations beyond the fourth order, making analytical optimal tuning expressions difficult; numerical solutions were used instead.
  • Evident from the text: the study is based on one bridge case and simulation results; the proposed MTMD and TMDI systems are not field-validated, and the model validation is shown only for the STMD case against Midas Civil.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1155/adce/6521700

Cites

19 of 19 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

2 Valid · 0 Not valid · 9 Not checked · 44 Own results and interpretations

32 more claims

Create a free account to see all 55 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 7
  • It may state two separate claims as one. 14

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

3 of 3

Citations

Cites

Show all 19 references

Research works printed but not linked: 6

  1. Van Nimmen K., 2014, Footbridge, 170
  2. Miguel L. F. F., 2023, Robust Optimum Design of MTMD for Control of Footbridges Subjected to Human-Induced Vibrations via the CIOA, Structural Engineering and Mechanics, 86, 647
  3. Zhang R. F., 2019, Inerter System and Its State-of-the-Art, Engineerig Mechanics, 36, 8
  4. GiaralisA.andTaflanidisA. Robust Reliability-Based Design of Seismically Excited Tuned Mass-Damper-Inerter (TMDI) Equipped MDOF Structures With Uncertain Properties 6th European Conference on Structural Control Paper No. 150 2016 City University London.
  5. Jiao J. F., 2023, Reserch on Pedestrian-Induced Vibration Test and Damping Control of Long-Span Simple-Supported Steel Truss Girder Pedestrian Bridge, Chinese, Journal of Taiyuan University of Technology, 54, 1083
  6. Li C. X., 2003, Comparative Study on Performance of Acceleration-Response-Control-Based MTMD for Structures Under Various Excitations, Chinese, Journal of Vibration and Shock, 22, 91

Metadata

Authors
Song, R.-F., Wang, J.-L., Yang, Z.-S., & Ma, S.-J.
Affiliations
Zhengzhou University of Technology (CN)
Corresponding author
Ma, Shi-Ju
Venue
Advances in Civil Engineering
Publisher
Wiley
Published
2025-01
Volume
2025
Issue
1
ISSN
  • 1687-8086 (ISSN-L)
  • 1687-8094
OpenAlex
W4409864355
Cited by
2
References
18
Citations by year
2026: 1 · 2025: 1
FWCI
0.64
Type
journal article
Language
en
Open access
Licence
Locations
  • Advances in Civil Engineering (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
Zhengzhou University (24GC02)
Topics
  • Physical Sciences › Engineering › Civil and Structural Engineering › Structural Engineering and Vibration Analysis
  • Physical Sciences › Engineering › Civil and Structural Engineering › Vibration Control and Rheological Fluids
  • Physical Sciences › Engineering › Mechanical Engineering › Vibration and Dynamic Analysis
Keywords
tuned mass damper inerter, multiple tuned mass dampers, pedestrian-induced vibration, vibration suppression, damping rate

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-12, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-12 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Optimization Analysis of Vibration Reduction for Large‐Span Steel Pedestrian Bridges Based on Tuned Mass Damper Inerter System. https://app.cochat.ai/papers/10.1155/adce/6521700
The paper
Song, R.-F., Wang, J.-L., Yang, Z.-S., & Ma, S.-J. (2025). Optimization Analysis of Vibration Reduction for Large‐Span Steel Pedestrian Bridges Based on Tuned Mass Damper Inerter System. Advances in Civil Engineering. https://doi.org/10.1155/adce/6521700

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.