The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Injectable PLGA microsphere/calcium phosphate cements: physical properties and degradation characteristics
Abstract
Calcium phosphate (CaP) cements show an excellent biocompatibility and often have a high mechanical strength, but in general degrade relatively slow. To increase degradation rates, macropores can be introduced into the cement, e.g., by the inclusion of biodegradable microspheres into the cement. The aim of this research is to develop an injectable PLGA microsphere/CaP cement with sufficient setting/cohesive properties and good mechanical and physical properties. PLGA microspheres were prepared using a water-in-oil-in-water double-emulsion technique. The CaP-cement used was Calcibon, a commercially available hydroxyapatite-based cement. 10:90 and 20:80 dry wt% PLGA microsphere/CaP cylindrical scaffolds were prepared as well as microporous cement (reference material). Injectability, setting time, cohesive properties and porosity were determined. Also, a 12-week degradation study in PBS (37 degree C) was performed. Results showed that injectability decreased with an increase in PLGA microsphere content. Initial and final setting time of the PLGA/CaP samples was higher than the microporous sample. Porosity of the different formulations was 40.8% (microporous), 60.2% (10:90) and 69.3% (20:80). The degradation study showed distinct mass loss and a pH decrease of the surrounding medium starting from week 6 with the 10:90 and 20:80 formulations, indicating PLGA erosion. Compression strength of the PLGA microsphere/CaP samples decreased siginificantly in time, the microporous sample remained constant. After 12 weeks both PLGA/CaP samples showed a structure of spherical micropores and had a compressive strength of 12.2 MPa (10:90) and 4.3 MPa (20:80). Signs of cement degradation were also found with the 20:80 formulation. In conclusion, all physical parameters were well within workable ranges with both 10:90 and 20:80 PLGA microsphere/CaP cements. After 12 weeks the PLGA was totally degraded and a highly porous, but strong scaffold remained.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
RUHE, Q. P., HEDBERG, E. L., PADRON, N. T., SPAUWEN, P. H. M., JANSEN, J. A., & MIKOS, A. G. (2003) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200300003-00013 · Cited by 186
Self-citation
Cited by
An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Gentile, P., Chiono, V., Carmagnola, I., & Hatton, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15033640 · Cited by 1,593
Injectable matrices and scaffolds for drug delivery in tissue engineering
Kretlow, J. D., Klouda, L., & Mikos, A. G. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.013 · Cited by 629
Self-citationCeramic composites as matrices and scaffolds for drug delivery in tissue engineering
Habraken, W. J. E. M., Wolke, J. G. C., & Jansen, J. A. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.011 · Cited by 566
Self-citationBone tissue engineering therapeutics: controlled drug delivery in three-dimensional scaffolds
Mouriño, V., & Boccaccini, A. R. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0379 · Cited by 527
Review: Mineralization of Synthetic Polymer Scaffolds for Bone Tissue Engineering
Kretlow, J. D., & Mikos, A. G. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0394 · Cited by 343
Self-citation
Metadata
- Authors
- Habraken, W. J. E. M., Wolke, J. G. C., Mikos, A. G., & Jansen, J. A.
- Venue
- Journal of Biomaterials Science, Polymer Edition
- Publisher
- Informa UK Limited
- Published
- 2006-01
- Volume
- 17
- Issue
- 9
- Pages
- 1057-1074
- ISSN
- 0920-5063 (ISSN-L)
- 1568-5624
- OpenAlex
- W2123714740
- Cited by
- 192
- References
- 1
- FWCI
- 10.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Injectable PLGA microsphere/calcium phosphate cements: physical properties and degradation characteristics. https://app.cochat.ai/papers/10.1163/156856206778366004
- The paper
- Habraken, W. J. E. M., Wolke, J. G. C., Mikos, A. G., & Jansen, J. A. (2006). Injectable PLGA microsphere/calcium phosphate cements: physical properties and degradation characteristics. Journal of Biomaterials Science, Polymer Edition. https://doi.org/10.1163/156856206778366004
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.